[SN 72717063] USED GIBSON USA / ES-350T [03]
This ES-350T is known for Chuck Berry's use, and this time we have a reissued version made in 1977.
This is the reissue version of the ES-350T, known for Chuck Berry's use, and features a different long scale from the original!
It has a maple body, 3-piece maple neck, and rosewood fingerboard, and is equipped with two "engraved numbered PAF" PUs.
The output is crisp and clear with a good tone that has a sweetness typical of full acoustic guitars.
The frets and nut are also original.
The original frets and nut have been kept, and the original frets are a little low.
The original frets are a little low, but there is no noticeable sound jamming and it is in good playing condition.
Considering its age, it is in good condition!
This is a valuable model that does not appear in large numbers, so if you are looking for one, please consider this as an opportunity!
* Due to the nature of this item, we are unable to move it between stores.
Truss Rod: Checked up to approx. 60° in both directions.
Neck condition: No problem
Fret: Slightly low
Caseļ¼Hard case
Accessories: None
Serial Number:72717063
Weight: 3.22kg
Item Rank: B+: Some scratches, but no problem in normal use
Serial number: 72717063
Weight: 3.22kg
Truss Rod: Less than half of the truss rod remains on the tightening side.
Fretboard: note that the frets are still low and can still be cut.
String Height Low String Side: 2.1mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.3mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: .011-.049 set (flat wound strings)
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, wiring correction
* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Original: $30.40
-65%$30.40
$10.64











Description
This ES-350T is known for Chuck Berry's use, and this time we have a reissued version made in 1977.
This is the reissue version of the ES-350T, known for Chuck Berry's use, and features a different long scale from the original!
It has a maple body, 3-piece maple neck, and rosewood fingerboard, and is equipped with two "engraved numbered PAF" PUs.
The output is crisp and clear with a good tone that has a sweetness typical of full acoustic guitars.
The frets and nut are also original.
The original frets and nut have been kept, and the original frets are a little low.
The original frets are a little low, but there is no noticeable sound jamming and it is in good playing condition.
Considering its age, it is in good condition!
This is a valuable model that does not appear in large numbers, so if you are looking for one, please consider this as an opportunity!
* Due to the nature of this item, we are unable to move it between stores.
Truss Rod: Checked up to approx. 60° in both directions.
Neck condition: No problem
Fret: Slightly low
Caseļ¼Hard case
Accessories: None
Serial Number:72717063
Weight: 3.22kg
Item Rank: B+: Some scratches, but no problem in normal use
Serial number: 72717063
Weight: 3.22kg
Truss Rod: Less than half of the truss rod remains on the tightening side.
Fretboard: note that the frets are still low and can still be cut.
String Height Low String Side: 2.1mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.3mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: .011-.049 set (flat wound strings)
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, wiring correction
* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.























