🎉 Up to 70% Off Selected ItemsShop Sale
[SN MADE IN USA 204648] USED GIBSON / Howard Roberts Custom [03]
Gibson Howard Roberts Custom, which seems to be manufactured around 1974 from the serial and pot date, etc., is now in stock!
This is the signature model of Howard Roberts, an American jazz guitarist and session musician!
This Howard Roberts Custom features a 16" laminated maple body with a florentine cutaway and oval soundhole, a 3-piece maple neck, and a rosewood fingerboard.
It features a tailpiece plate with the Howard Roberts name and flower inlays on the head.
The PU is equipped with a floating humbucker.
The controls are 1 volume and 2 tones, allowing for a wide variety of sound creation despite being a single PU.
The pot date is dated '74 in two places.
There are scratches, dents, weather checks, cracks, etc., but considering the age of the instrument, it is in fair condition.
The bridge is not lowered by a wide range of string height, but it can be set up without any problem.
This is a rare model that is rarely seen on the market.
Please take advantage of this opportunity.
* Due to the nature of this item, it cannot be moved from one store to another.
Truss rod: No problem as it is now, as we have checked the rod to 60 degrees left and right (firm, with a little remaining in the tightening direction).
Neck condition: No problem
Fret: About 40-50%.
Case: Non-genuine hard case
Accessories: None
Serial number: 204048
Weight: 3.07kg
Item Rank: B: Fairly scratched & used, but no problems in normal use
Serial Number: MADE IN USA 204648
Case: Soft case
Truss Rod: Note: I have checked the rod up to 60 degrees to the left and right, and there is no problem.
Fretboard: note that the frets are low, but can still be cut.
String Height Low String Side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.09mm
Neck thickness near 1st fret: 20.15mm
Strings used for setup: D'Addario ECG24
Repair and maintenance parts: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This is the signature model of Howard Roberts, an American jazz guitarist and session musician!
This Howard Roberts Custom features a 16" laminated maple body with a florentine cutaway and oval soundhole, a 3-piece maple neck, and a rosewood fingerboard.
It features a tailpiece plate with the Howard Roberts name and flower inlays on the head.
The PU is equipped with a floating humbucker.
The controls are 1 volume and 2 tones, allowing for a wide variety of sound creation despite being a single PU.
The pot date is dated '74 in two places.
There are scratches, dents, weather checks, cracks, etc., but considering the age of the instrument, it is in fair condition.
The bridge is not lowered by a wide range of string height, but it can be set up without any problem.
This is a rare model that is rarely seen on the market.
Please take advantage of this opportunity.
* Due to the nature of this item, it cannot be moved from one store to another.
Truss rod: No problem as it is now, as we have checked the rod to 60 degrees left and right (firm, with a little remaining in the tightening direction).
Neck condition: No problem
Fret: About 40-50%.
Case: Non-genuine hard case
Accessories: None
Serial number: 204048
Weight: 3.07kg
Item Rank: B: Fairly scratched & used, but no problems in normal use
Serial Number: MADE IN USA 204648
Case: Soft case
Truss Rod: Note: I have checked the rod up to 60 degrees to the left and right, and there is no problem.
Fretboard: note that the frets are low, but can still be cut.
String Height Low String Side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.09mm
Neck thickness near 1st fret: 20.15mm
Strings used for setup: D'Addario ECG24
Repair and maintenance parts: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$7.91
Original: $22.59
-65%[SN MADE IN USA 204648] USED GIBSON / Howard Roberts Custom [03]—
$22.59
$7.91
Description
Gibson Howard Roberts Custom, which seems to be manufactured around 1974 from the serial and pot date, etc., is now in stock!
This is the signature model of Howard Roberts, an American jazz guitarist and session musician!
This Howard Roberts Custom features a 16" laminated maple body with a florentine cutaway and oval soundhole, a 3-piece maple neck, and a rosewood fingerboard.
It features a tailpiece plate with the Howard Roberts name and flower inlays on the head.
The PU is equipped with a floating humbucker.
The controls are 1 volume and 2 tones, allowing for a wide variety of sound creation despite being a single PU.
The pot date is dated '74 in two places.
There are scratches, dents, weather checks, cracks, etc., but considering the age of the instrument, it is in fair condition.
The bridge is not lowered by a wide range of string height, but it can be set up without any problem.
This is a rare model that is rarely seen on the market.
Please take advantage of this opportunity.
* Due to the nature of this item, it cannot be moved from one store to another.
Truss rod: No problem as it is now, as we have checked the rod to 60 degrees left and right (firm, with a little remaining in the tightening direction).
Neck condition: No problem
Fret: About 40-50%.
Case: Non-genuine hard case
Accessories: None
Serial number: 204048
Weight: 3.07kg
Item Rank: B: Fairly scratched & used, but no problems in normal use
Serial Number: MADE IN USA 204648
Case: Soft case
Truss Rod: Note: I have checked the rod up to 60 degrees to the left and right, and there is no problem.
Fretboard: note that the frets are low, but can still be cut.
String Height Low String Side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.09mm
Neck thickness near 1st fret: 20.15mm
Strings used for setup: D'Addario ECG24
Repair and maintenance parts: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This is the signature model of Howard Roberts, an American jazz guitarist and session musician!
This Howard Roberts Custom features a 16" laminated maple body with a florentine cutaway and oval soundhole, a 3-piece maple neck, and a rosewood fingerboard.
It features a tailpiece plate with the Howard Roberts name and flower inlays on the head.
The PU is equipped with a floating humbucker.
The controls are 1 volume and 2 tones, allowing for a wide variety of sound creation despite being a single PU.
The pot date is dated '74 in two places.
There are scratches, dents, weather checks, cracks, etc., but considering the age of the instrument, it is in fair condition.
The bridge is not lowered by a wide range of string height, but it can be set up without any problem.
This is a rare model that is rarely seen on the market.
Please take advantage of this opportunity.
* Due to the nature of this item, it cannot be moved from one store to another.
Truss rod: No problem as it is now, as we have checked the rod to 60 degrees left and right (firm, with a little remaining in the tightening direction).
Neck condition: No problem
Fret: About 40-50%.
Case: Non-genuine hard case
Accessories: None
Serial number: 204048
Weight: 3.07kg
Item Rank: B: Fairly scratched & used, but no problems in normal use
Serial Number: MADE IN USA 204648
Case: Soft case
Truss Rod: Note: I have checked the rod up to 60 degrees to the left and right, and there is no problem.
Fretboard: note that the frets are low, but can still be cut.
String Height Low String Side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.09mm
Neck thickness near 1st fret: 20.15mm
Strings used for setup: D'Addario ECG24
Repair and maintenance parts: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
