🎉 Up to 70% Off Selected ItemsShop Sale
[SN US17032665] USED FENDER USA / American Professional Jazz Bass FL [03]
FENDER USA / AM PRO JB FL RW is in stock used.
Scratches all over the body, sticker mark on the pickguard, and the nut on the 4th string is low, so the open string is a little chattering. There are no neck or rod problems.
This item has been cleaned, maintained, and set up by our repair department.
Item rank: B
Nut part not covered by warranty
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: US17032665
Country of manufacture: USA
Case: Hard Case
Weight: 3.90kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard is high enough.
String Height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.9mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 22.9mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario ECB81 / .045-.100 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Scratches all over the body, sticker mark on the pickguard, and the nut on the 4th string is low, so the open string is a little chattering. There are no neck or rod problems.
This item has been cleaned, maintained, and set up by our repair department.
Item rank: B
Nut part not covered by warranty
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: US17032665
Country of manufacture: USA
Case: Hard Case
Weight: 3.90kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard is high enough.
String Height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.9mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 22.9mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario ECB81 / .045-.100 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$2.47
Original: $7.05
-65%[SN US17032665] USED FENDER USA / American Professional Jazz Bass FL [03]—
$7.05
$2.47
Description
FENDER USA / AM PRO JB FL RW is in stock used.
Scratches all over the body, sticker mark on the pickguard, and the nut on the 4th string is low, so the open string is a little chattering. There are no neck or rod problems.
This item has been cleaned, maintained, and set up by our repair department.
Item rank: B
Nut part not covered by warranty
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: US17032665
Country of manufacture: USA
Case: Hard Case
Weight: 3.90kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard is high enough.
String Height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.9mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 22.9mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario ECB81 / .045-.100 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Scratches all over the body, sticker mark on the pickguard, and the nut on the 4th string is low, so the open string is a little chattering. There are no neck or rod problems.
This item has been cleaned, maintained, and set up by our repair department.
Item rank: B
Nut part not covered by warranty
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: US17032665
Country of manufacture: USA
Case: Hard Case
Weight: 3.90kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard is high enough.
String Height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.9mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 22.9mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario ECB81 / .045-.100 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
