[SN CIJR007572] USED FENDER JAPAN / JB62-75US 3-Tone Sunburst [03]
Featuring a slab rosewood fingerboard and an earth wire beneath the rear pickup, this "JB62" model faithfully replicates the 1962 Jazz Bass. Alongside Fender Japan's "JB75," it stands as one of the most popular Japanese-made Fender models.
Based on the serial number, this appears to be a higher-end JB62-75 model manufactured around 2004 to 2006, featuring spiral saddles.
Both the playability and sound give the impression of a Jazz Bass with no quirks, making you understand why this model has been loved for so long.
The frets are slightly low, and the truss rod has about half a turn left to loosen, but the neck is currently in good condition and does not affect playability.
The tuning pegs show some dullness, and overall, there are visible scuff marks.
Condition Grade: B+
Truss Rod: Approximately 90 degrees of adjustment remaining in the loosening direction
Neck Condition: No issues
Frets: About 60%
Case: Soft case
Accessories: Manual
Other:
Serial Number: R007572
Weight (kg): 4.21
Product Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: R007572
Manufacturing Year: 2004~2006
Case: Soft Case
Weight: 4.21 kg
Truss Rod: No issues. Rod tested to 60 degrees both ways with no problems.
Fret Wear: No issues; sufficient fret height present
String Height (Low String Side): 2.5mm at 12th fret
String Height (High-String Side): 2.1mm above the 12th fret
Nut width: 39.1mm
Neck Thickness Near 1st Fret: 21.2mm
Neck Thickness at 12th Fret: 24.2mm
Scale length: 864mm (34")
Fingerboard radius: 184mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repair/Maintenance: Cleaning, truss rod adjustment, octave adjustment, string height adjustment, lapping
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but this is not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
Original: $4.49
-65%$4.49
$1.57














Description
Featuring a slab rosewood fingerboard and an earth wire beneath the rear pickup, this "JB62" model faithfully replicates the 1962 Jazz Bass. Alongside Fender Japan's "JB75," it stands as one of the most popular Japanese-made Fender models.
Based on the serial number, this appears to be a higher-end JB62-75 model manufactured around 2004 to 2006, featuring spiral saddles.
Both the playability and sound give the impression of a Jazz Bass with no quirks, making you understand why this model has been loved for so long.
The frets are slightly low, and the truss rod has about half a turn left to loosen, but the neck is currently in good condition and does not affect playability.
The tuning pegs show some dullness, and overall, there are visible scuff marks.
Condition Grade: B+
Truss Rod: Approximately 90 degrees of adjustment remaining in the loosening direction
Neck Condition: No issues
Frets: About 60%
Case: Soft case
Accessories: Manual
Other:
Serial Number: R007572
Weight (kg): 4.21
Product Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: R007572
Manufacturing Year: 2004~2006
Case: Soft Case
Weight: 4.21 kg
Truss Rod: No issues. Rod tested to 60 degrees both ways with no problems.
Fret Wear: No issues; sufficient fret height present
String Height (Low String Side): 2.5mm at 12th fret
String Height (High-String Side): 2.1mm above the 12th fret
Nut width: 39.1mm
Neck Thickness Near 1st Fret: 21.2mm
Neck Thickness at 12th Fret: 24.2mm
Scale length: 864mm (34")
Fingerboard radius: 184mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repair/Maintenance: Cleaning, truss rod adjustment, octave adjustment, string height adjustment, lapping
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but this is not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.























