🎉 Up to 70% Off Selected ItemsShop Sale
[SN M12S02] USED Fernandes / MG80X Black MOD [10]
Our cool mockingbird-shaped model is now in stock!
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple platforms, we strive to remove product listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: M12S02
Country of Manufacture: Japan
Case: Soft case
Accessories: Genuine parts (bridge, pegs, etc.)
Weight: 3.77 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0mm
Scale: 628mm (24.75")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Some of the pickup escutcheon mounting screws are aftermarket parts. Hardware such as the bridge and tuners has been replaced; the strap pin has been replaced with a locking pin (the original locking pin part is out of stock); the rear pickup has been replaced and phase-outs when in the center position.
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, nut replacement
Other: There are dents and scuffs throughout the instrument, and touch-up paint has been applied to the chipped area on the underside of the body.
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple platforms, we strive to remove product listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: M12S02
Country of Manufacture: Japan
Case: Soft case
Accessories: Genuine parts (bridge, pegs, etc.)
Weight: 3.77 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0mm
Scale: 628mm (24.75")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Some of the pickup escutcheon mounting screws are aftermarket parts. Hardware such as the bridge and tuners has been replaced; the strap pin has been replaced with a locking pin (the original locking pin part is out of stock); the rear pickup has been replaced and phase-outs when in the center position.
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, nut replacement
Other: There are dents and scuffs throughout the instrument, and touch-up paint has been applied to the chipped area on the underside of the body.
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$3.61
[SN M12S02] USED Fernandes / MG80X Black MOD [10]—
$3.61
Description
Our cool mockingbird-shaped model is now in stock!
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple platforms, we strive to remove product listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: M12S02
Country of Manufacture: Japan
Case: Soft case
Accessories: Genuine parts (bridge, pegs, etc.)
Weight: 3.77 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0mm
Scale: 628mm (24.75")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Some of the pickup escutcheon mounting screws are aftermarket parts. Hardware such as the bridge and tuners has been replaced; the strap pin has been replaced with a locking pin (the original locking pin part is out of stock); the rear pickup has been replaced and phase-outs when in the center position.
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, nut replacement
Other: There are dents and scuffs throughout the instrument, and touch-up paint has been applied to the chipped area on the underside of the body.
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple platforms, we strive to remove product listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: M12S02
Country of Manufacture: Japan
Case: Soft case
Accessories: Genuine parts (bridge, pegs, etc.)
Weight: 3.77 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0mm
Scale: 628mm (24.75")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Some of the pickup escutcheon mounting screws are aftermarket parts. Hardware such as the bridge and tuners has been replaced; the strap pin has been replaced with a locking pin (the original locking pin part is out of stock); the rear pickup has been replaced and phase-outs when in the center position.
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, nut replacement
Other: There are dents and scuffs throughout the instrument, and touch-up paint has been applied to the chipped area on the underside of the body.
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
