🎉 Up to 70% Off Selected ItemsShop Sale
[SN 301818] USED ATELIER Z / Beta4 Standard Natural [12]
This model is based on the popular "BETA" model at an affordable price.
The ash body is designed to be small enough to reach the 24th fret easily, the maple neck has KTS titanium rod support, the original JZ-4 pickup with a wide range achieved by the diagonally placed pole piece, the ZBA 1 Preamp, and a Serise/Parallel switch.
The Atelier Z sound of high playability at low string height and powerful sound pressure regardless of position is of course still present.
There are some minor scratches and dents scattered throughout, and the hardware is dull.
The hardware is dull. Although there is a slight feeling of use, each part has been maintained and cleaned at our repair center, and the playability is good.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 301818
Year of manufacture: 2018
Country of Manufacture: Japan
Case: non-genuine soft case
Accessories: spec sheet
Weight: 3.90kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 24.5mm
SCALE: 864mm (34")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The ash body is designed to be small enough to reach the 24th fret easily, the maple neck has KTS titanium rod support, the original JZ-4 pickup with a wide range achieved by the diagonally placed pole piece, the ZBA 1 Preamp, and a Serise/Parallel switch.
The Atelier Z sound of high playability at low string height and powerful sound pressure regardless of position is of course still present.
There are some minor scratches and dents scattered throughout, and the hardware is dull.
The hardware is dull. Although there is a slight feeling of use, each part has been maintained and cleaned at our repair center, and the playability is good.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 301818
Year of manufacture: 2018
Country of Manufacture: Japan
Case: non-genuine soft case
Accessories: spec sheet
Weight: 3.90kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 24.5mm
SCALE: 864mm (34")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$2.47
Original: $7.05
-65%[SN 301818] USED ATELIER Z / Beta4 Standard Natural [12]—
$7.05
$2.47
Description
This model is based on the popular "BETA" model at an affordable price.
The ash body is designed to be small enough to reach the 24th fret easily, the maple neck has KTS titanium rod support, the original JZ-4 pickup with a wide range achieved by the diagonally placed pole piece, the ZBA 1 Preamp, and a Serise/Parallel switch.
The Atelier Z sound of high playability at low string height and powerful sound pressure regardless of position is of course still present.
There are some minor scratches and dents scattered throughout, and the hardware is dull.
The hardware is dull. Although there is a slight feeling of use, each part has been maintained and cleaned at our repair center, and the playability is good.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 301818
Year of manufacture: 2018
Country of Manufacture: Japan
Case: non-genuine soft case
Accessories: spec sheet
Weight: 3.90kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 24.5mm
SCALE: 864mm (34")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The ash body is designed to be small enough to reach the 24th fret easily, the maple neck has KTS titanium rod support, the original JZ-4 pickup with a wide range achieved by the diagonally placed pole piece, the ZBA 1 Preamp, and a Serise/Parallel switch.
The Atelier Z sound of high playability at low string height and powerful sound pressure regardless of position is of course still present.
There are some minor scratches and dents scattered throughout, and the hardware is dull.
The hardware is dull. Although there is a slight feeling of use, each part has been maintained and cleaned at our repair center, and the playability is good.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 301818
Year of manufacture: 2018
Country of Manufacture: Japan
Case: non-genuine soft case
Accessories: spec sheet
Weight: 3.90kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 24.5mm
SCALE: 864mm (34")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
