🎉 Up to 70% Off Selected ItemsShop Sale
[SN 9837203] USED Jackson / RX10D Black [12]
The Japanese-made Jackson RRV has arrived.
As one of the classic models among unconventional guitars, it remains popular in the metal scene today. It features an asymmetrical V-shaped body, a Concorde headstock, and shark fin inlays. Based on the serial number, this instrument is believed to have been manufactured in 1998 by Chushin Gakki.
It features a basswood body, a maple neck, and a rosewood fingerboard with 22 jumbo frets, boasting excellent playability thanks to a 12"-16" compound fingerboard radius.
It is equipped with Duncan Designed HB-102N/103B pickups and a locking tremolo, offering the specifications required for HR/HM.
There are traces of a filled strap pin hole next to the neck joint plate, and paint peeling on the tip of the wing on the G-string side.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
The neck has a slight waviness, but there is currently no fret buzz or muting.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 9837203
Year of Manufacture: 1998
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.20 kg
Truss Rod: Checked up to 60 degrees left and right; no issues (slight waviness present)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.5 mm
Neck thickness near the 1st fret: 18.9 mm
Neck thickness near the 12th fret: 21.4 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, electronics repair, and fret leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
As one of the classic models among unconventional guitars, it remains popular in the metal scene today. It features an asymmetrical V-shaped body, a Concorde headstock, and shark fin inlays. Based on the serial number, this instrument is believed to have been manufactured in 1998 by Chushin Gakki.
It features a basswood body, a maple neck, and a rosewood fingerboard with 22 jumbo frets, boasting excellent playability thanks to a 12"-16" compound fingerboard radius.
It is equipped with Duncan Designed HB-102N/103B pickups and a locking tremolo, offering the specifications required for HR/HM.
There are traces of a filled strap pin hole next to the neck joint plate, and paint peeling on the tip of the wing on the G-string side.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
The neck has a slight waviness, but there is currently no fret buzz or muting.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 9837203
Year of Manufacture: 1998
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.20 kg
Truss Rod: Checked up to 60 degrees left and right; no issues (slight waviness present)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.5 mm
Neck thickness near the 1st fret: 18.9 mm
Neck thickness near the 12th fret: 21.4 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, electronics repair, and fret leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$0.93
Original: $2.66
-65%[SN 9837203] USED Jackson / RX10D Black [12]—
$2.66
$0.93
Description
The Japanese-made Jackson RRV has arrived.
As one of the classic models among unconventional guitars, it remains popular in the metal scene today. It features an asymmetrical V-shaped body, a Concorde headstock, and shark fin inlays. Based on the serial number, this instrument is believed to have been manufactured in 1998 by Chushin Gakki.
It features a basswood body, a maple neck, and a rosewood fingerboard with 22 jumbo frets, boasting excellent playability thanks to a 12"-16" compound fingerboard radius.
It is equipped with Duncan Designed HB-102N/103B pickups and a locking tremolo, offering the specifications required for HR/HM.
There are traces of a filled strap pin hole next to the neck joint plate, and paint peeling on the tip of the wing on the G-string side.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
The neck has a slight waviness, but there is currently no fret buzz or muting.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 9837203
Year of Manufacture: 1998
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.20 kg
Truss Rod: Checked up to 60 degrees left and right; no issues (slight waviness present)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.5 mm
Neck thickness near the 1st fret: 18.9 mm
Neck thickness near the 12th fret: 21.4 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, electronics repair, and fret leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
As one of the classic models among unconventional guitars, it remains popular in the metal scene today. It features an asymmetrical V-shaped body, a Concorde headstock, and shark fin inlays. Based on the serial number, this instrument is believed to have been manufactured in 1998 by Chushin Gakki.
It features a basswood body, a maple neck, and a rosewood fingerboard with 22 jumbo frets, boasting excellent playability thanks to a 12"-16" compound fingerboard radius.
It is equipped with Duncan Designed HB-102N/103B pickups and a locking tremolo, offering the specifications required for HR/HM.
There are traces of a filled strap pin hole next to the neck joint plate, and paint peeling on the tip of the wing on the G-string side.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
The neck has a slight waviness, but there is currently no fret buzz or muting.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 9837203
Year of Manufacture: 1998
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.20 kg
Truss Rod: Checked up to 60 degrees left and right; no issues (slight waviness present)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.5 mm
Neck thickness near the 1st fret: 18.9 mm
Neck thickness near the 12th fret: 21.4 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, electronics repair, and fret leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
