🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

[SN E5500182] USED ESP / Viper Bass Liquid Metal Red [12]

[SN E5500182] USED ESP / Viper Bass Liquid Metal Red [12]

The ESP Viper Bass, finished in Liquid Metal Red, has arrived.
Featuring an asymmetrical double-cutaway mahogany body, a 3-piece hard maple neck, and a rosewood fingerboard, this model is equipped with Seymour Duncan SSB-4n/b pickups.

It features ESP’s original CINNAMON preamp, delivering a punchy sound with a 2-band EQ.
Pulling up the master volume switch allows for the mellow, passive sound characteristic of passive pickups.
While there are minor scratches throughout and some tarnish on the hardware, it shows minimal signs of use and is in good condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
The strap lock is missing.
The area inside the case where the tuning pegs rest is torn and has been reinforced with duct tape.
Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: E5500182
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.96 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.5 mm
Scale: 864mm (34")
Radius: 305mm (12")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
$3.12

Original: $8.92

-65%
[SN E5500182] USED ESP / Viper Bass Liquid Metal Red [12]

$8.92

$3.12
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
Product image 10
Product image 11
Product image 12
Product image 13
Product image 14
Product image 15

Description

The ESP Viper Bass, finished in Liquid Metal Red, has arrived.
Featuring an asymmetrical double-cutaway mahogany body, a 3-piece hard maple neck, and a rosewood fingerboard, this model is equipped with Seymour Duncan SSB-4n/b pickups.

It features ESP’s original CINNAMON preamp, delivering a punchy sound with a 2-band EQ.
Pulling up the master volume switch allows for the mellow, passive sound characteristic of passive pickups.
While there are minor scratches throughout and some tarnish on the hardware, it shows minimal signs of use and is in good condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
The strap lock is missing.
The area inside the case where the tuning pegs rest is torn and has been reinforced with duct tape.
Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: E5500182
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.96 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.5 mm
Scale: 864mm (34")
Radius: 305mm (12")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.