🎉 Up to 70% Off Selected ItemsShop Sale
USED Burny / HR-85 HIDE MODEL FN [12]
The HIDE model, released in a limited edition of 500 pieces in 2002, has arrived!
The HIDE Model HR was designed around 1998 as a new signature model to replace the MG.
The HR-KORINA, featuring luxurious Korina wood, was created for the hide MUSEUM(closed in 2005), the HR-KORINA was crafted using a generous amount of Korina wood. Following the HR-195 REBIRTH—a Honduran mahogany model produced in a limited run of 300 units in 2001—the HR-85 with a mahogany body was produced in a limited run of 500 units in 2002 as a more cost-effective version.
The guitar features a Fernandes original humbucker pickup, with controls consisting of a single volume knob, a pickup selector, and a direct switch—specs designed for the stage that allow you to focus on your performance.
Since these models are rarely listed on the second-hand market these days, if you’re looking for one, please take this opportunity to consider it!
There are scattered fine scratches and dents of various sizes throughout the instrument, and the neck grip and body elbow contour show some wear and shine from friction.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition: B+: Some scratches, but no issues for normal use
Year of Manufacture: 2002
Case: Genuine hard case
Weight: 3.95 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 628mm (24.75")
Radius: 381mm (15")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The HIDE Model HR was designed around 1998 as a new signature model to replace the MG.
The HR-KORINA, featuring luxurious Korina wood, was created for the hide MUSEUM(closed in 2005), the HR-KORINA was crafted using a generous amount of Korina wood. Following the HR-195 REBIRTH—a Honduran mahogany model produced in a limited run of 300 units in 2001—the HR-85 with a mahogany body was produced in a limited run of 500 units in 2002 as a more cost-effective version.
The guitar features a Fernandes original humbucker pickup, with controls consisting of a single volume knob, a pickup selector, and a direct switch—specs designed for the stage that allow you to focus on your performance.
Since these models are rarely listed on the second-hand market these days, if you’re looking for one, please take this opportunity to consider it!
There are scattered fine scratches and dents of various sizes throughout the instrument, and the neck grip and body elbow contour show some wear and shine from friction.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition: B+: Some scratches, but no issues for normal use
Year of Manufacture: 2002
Case: Genuine hard case
Weight: 3.95 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 628mm (24.75")
Radius: 381mm (15")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$3.63
Original: $10.37
-65%USED Burny / HR-85 HIDE MODEL FN [12]—
$10.37
$3.63
Description
The HIDE model, released in a limited edition of 500 pieces in 2002, has arrived!
The HIDE Model HR was designed around 1998 as a new signature model to replace the MG.
The HR-KORINA, featuring luxurious Korina wood, was created for the hide MUSEUM(closed in 2005), the HR-KORINA was crafted using a generous amount of Korina wood. Following the HR-195 REBIRTH—a Honduran mahogany model produced in a limited run of 300 units in 2001—the HR-85 with a mahogany body was produced in a limited run of 500 units in 2002 as a more cost-effective version.
The guitar features a Fernandes original humbucker pickup, with controls consisting of a single volume knob, a pickup selector, and a direct switch—specs designed for the stage that allow you to focus on your performance.
Since these models are rarely listed on the second-hand market these days, if you’re looking for one, please take this opportunity to consider it!
There are scattered fine scratches and dents of various sizes throughout the instrument, and the neck grip and body elbow contour show some wear and shine from friction.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition: B+: Some scratches, but no issues for normal use
Year of Manufacture: 2002
Case: Genuine hard case
Weight: 3.95 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 628mm (24.75")
Radius: 381mm (15")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The HIDE Model HR was designed around 1998 as a new signature model to replace the MG.
The HR-KORINA, featuring luxurious Korina wood, was created for the hide MUSEUM(closed in 2005), the HR-KORINA was crafted using a generous amount of Korina wood. Following the HR-195 REBIRTH—a Honduran mahogany model produced in a limited run of 300 units in 2001—the HR-85 with a mahogany body was produced in a limited run of 500 units in 2002 as a more cost-effective version.
The guitar features a Fernandes original humbucker pickup, with controls consisting of a single volume knob, a pickup selector, and a direct switch—specs designed for the stage that allow you to focus on your performance.
Since these models are rarely listed on the second-hand market these days, if you’re looking for one, please take this opportunity to consider it!
There are scattered fine scratches and dents of various sizes throughout the instrument, and the neck grip and body elbow contour show some wear and shine from friction.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition: B+: Some scratches, but no issues for normal use
Year of Manufacture: 2002
Case: Genuine hard case
Weight: 3.95 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 628mm (24.75")
Radius: 381mm (15")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
