🎉 Up to 70% Off Selected ItemsShop Sale
[SN I855240] USED Ibanez / AXB50 Black [20]
"Ibanez Tailend Tuners" Axster Series
This is an Ibanez headless bass, model AXB50, manufactured in 1985.
Featuring a basswood body, a maple neck with an angled design to ensure proper string tension, and a rosewood fingerboard, this model is equipped with Balance, Volume, and Tone controls.
Slim and compact enough to fit in a guitar case, yet featuring a long scale, this model showcases the cutting-edge design of its era.
Although there is little adjustment range left, the truss rod can be turned all the way to reverse bow.
We have performed a neck leveling due to warping, but given the poor condition of the instrument, if the issue worsens from this point, a fingerboard repair or refretting will be necessary.
However, it is highly unlikely that this will result in significant improvement.
Based on current standards, there is no muting.
There is significant paint peeling on the sides and back of the body.
Overall, there are scratches and rust on the parts, showing significant signs of wear.
The top of the zipper on the included case is broken and will not close.
Condition Grade: B: Shows significant scratches and signs of use, but is suitable for normal use
Serial Number: I855240
Year of Manufacture: 1985
Case: Original soft case
Accessories: None
Weight: 3.25 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slight waviness, limited remaining travel)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 40.4 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 864mm (34")
Radius: 254mm (10")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This is an Ibanez headless bass, model AXB50, manufactured in 1985.
Featuring a basswood body, a maple neck with an angled design to ensure proper string tension, and a rosewood fingerboard, this model is equipped with Balance, Volume, and Tone controls.
Slim and compact enough to fit in a guitar case, yet featuring a long scale, this model showcases the cutting-edge design of its era.
Although there is little adjustment range left, the truss rod can be turned all the way to reverse bow.
We have performed a neck leveling due to warping, but given the poor condition of the instrument, if the issue worsens from this point, a fingerboard repair or refretting will be necessary.
However, it is highly unlikely that this will result in significant improvement.
Based on current standards, there is no muting.
There is significant paint peeling on the sides and back of the body.
Overall, there are scratches and rust on the parts, showing significant signs of wear.
The top of the zipper on the included case is broken and will not close.
Condition Grade: B: Shows significant scratches and signs of use, but is suitable for normal use
Serial Number: I855240
Year of Manufacture: 1985
Case: Original soft case
Accessories: None
Weight: 3.25 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slight waviness, limited remaining travel)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 40.4 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 864mm (34")
Radius: 254mm (10")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.32
Original: $3.77
-65%[SN I855240] USED Ibanez / AXB50 Black [20]—
$3.77
$1.32
Description
"Ibanez Tailend Tuners" Axster Series
This is an Ibanez headless bass, model AXB50, manufactured in 1985.
Featuring a basswood body, a maple neck with an angled design to ensure proper string tension, and a rosewood fingerboard, this model is equipped with Balance, Volume, and Tone controls.
Slim and compact enough to fit in a guitar case, yet featuring a long scale, this model showcases the cutting-edge design of its era.
Although there is little adjustment range left, the truss rod can be turned all the way to reverse bow.
We have performed a neck leveling due to warping, but given the poor condition of the instrument, if the issue worsens from this point, a fingerboard repair or refretting will be necessary.
However, it is highly unlikely that this will result in significant improvement.
Based on current standards, there is no muting.
There is significant paint peeling on the sides and back of the body.
Overall, there are scratches and rust on the parts, showing significant signs of wear.
The top of the zipper on the included case is broken and will not close.
Condition Grade: B: Shows significant scratches and signs of use, but is suitable for normal use
Serial Number: I855240
Year of Manufacture: 1985
Case: Original soft case
Accessories: None
Weight: 3.25 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slight waviness, limited remaining travel)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 40.4 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 864mm (34")
Radius: 254mm (10")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
This is an Ibanez headless bass, model AXB50, manufactured in 1985.
Featuring a basswood body, a maple neck with an angled design to ensure proper string tension, and a rosewood fingerboard, this model is equipped with Balance, Volume, and Tone controls.
Slim and compact enough to fit in a guitar case, yet featuring a long scale, this model showcases the cutting-edge design of its era.
Although there is little adjustment range left, the truss rod can be turned all the way to reverse bow.
We have performed a neck leveling due to warping, but given the poor condition of the instrument, if the issue worsens from this point, a fingerboard repair or refretting will be necessary.
However, it is highly unlikely that this will result in significant improvement.
Based on current standards, there is no muting.
There is significant paint peeling on the sides and back of the body.
Overall, there are scratches and rust on the parts, showing significant signs of wear.
The top of the zipper on the included case is broken and will not close.
Condition Grade: B: Shows significant scratches and signs of use, but is suitable for normal use
Serial Number: I855240
Year of Manufacture: 1985
Case: Original soft case
Accessories: None
Weight: 3.25 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slight waviness, limited remaining travel)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 40.4 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 864mm (34")
Radius: 254mm (10")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
