🎉 Up to 70% Off Selected ItemsShop Sale
[SN E699551] USED FENDER JAPAN (pre-2015) / JB75-80 Natural [20]
Fender Japan Jazz Bass JB75-80.
Featuring an ash body, a one-piece maple neck, a fingerboard with block inlays and binding, a three-point bolt-on neck joint, and a bullet truss rod nut, this model recreates the specifications from the period immediately after Fender was acquired by CBS.
The clear bass tones and crisp sound produced by the heavy ash body and maple neck are unique to this configuration.
There are numerous small dents accompanied by paint chips and cracks on the headstock corners, body sides, and body corners.
The parts show signs of tarnish and rust, and there are small dents accompanied by scratches and dents throughout the instrument.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: MIJ E699551
Year of Manufacture: 1984-1987
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 5.33 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 38.1 mm
Neck thickness near the 1st fret: 20.5 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 864mm (34")
Radius: 184mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, neck straightening, fret leveling, pickup height adjustment, sponge replacement, pickup mounting screw replacement, nut replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring an ash body, a one-piece maple neck, a fingerboard with block inlays and binding, a three-point bolt-on neck joint, and a bullet truss rod nut, this model recreates the specifications from the period immediately after Fender was acquired by CBS.
The clear bass tones and crisp sound produced by the heavy ash body and maple neck are unique to this configuration.
There are numerous small dents accompanied by paint chips and cracks on the headstock corners, body sides, and body corners.
The parts show signs of tarnish and rust, and there are small dents accompanied by scratches and dents throughout the instrument.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: MIJ E699551
Year of Manufacture: 1984-1987
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 5.33 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 38.1 mm
Neck thickness near the 1st fret: 20.5 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 864mm (34")
Radius: 184mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, neck straightening, fret leveling, pickup height adjustment, sponge replacement, pickup mounting screw replacement, nut replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$1.98
Original: $5.66
-65%[SN E699551] USED FENDER JAPAN (pre-2015) / JB75-80 Natural [20]—
$5.66
$1.98
Description
Fender Japan Jazz Bass JB75-80.
Featuring an ash body, a one-piece maple neck, a fingerboard with block inlays and binding, a three-point bolt-on neck joint, and a bullet truss rod nut, this model recreates the specifications from the period immediately after Fender was acquired by CBS.
The clear bass tones and crisp sound produced by the heavy ash body and maple neck are unique to this configuration.
There are numerous small dents accompanied by paint chips and cracks on the headstock corners, body sides, and body corners.
The parts show signs of tarnish and rust, and there are small dents accompanied by scratches and dents throughout the instrument.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: MIJ E699551
Year of Manufacture: 1984-1987
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 5.33 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 38.1 mm
Neck thickness near the 1st fret: 20.5 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 864mm (34")
Radius: 184mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, neck straightening, fret leveling, pickup height adjustment, sponge replacement, pickup mounting screw replacement, nut replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring an ash body, a one-piece maple neck, a fingerboard with block inlays and binding, a three-point bolt-on neck joint, and a bullet truss rod nut, this model recreates the specifications from the period immediately after Fender was acquired by CBS.
The clear bass tones and crisp sound produced by the heavy ash body and maple neck are unique to this configuration.
There are numerous small dents accompanied by paint chips and cracks on the headstock corners, body sides, and body corners.
The parts show signs of tarnish and rust, and there are small dents accompanied by scratches and dents throughout the instrument.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: MIJ E699551
Year of Manufacture: 1984-1987
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 5.33 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.5 mm at the 12th fret
String height (treble side): 2.0 mm at the 12th fret
Nut width: 38.1 mm
Neck thickness near the 1st fret: 20.5 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 864mm (34")
Radius: 184mm (7.25")
Strings at setup: D'Addario EXL165 / .045-.105 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, neck straightening, fret leveling, pickup height adjustment, sponge replacement, pickup mounting screw replacement, nut replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
