🎉 Up to 70% Off Selected ItemsShop Sale
[SN MX22303677] USED FENDER MEXICO / Vintera 60s Jazzmaster Olympic White [20]
A Jazzmaster that recreates the vintage sound and look.
It recreates early 1960s specifications, including the Spaghetti logo, a rosewood fingerboard with a slab profile, and dot inlays.
Not only the appearance but also the neck shape is inspired by vintage models, featuring a Mid-60s C-shape with a 7.25-inch fingerboard radius and vintage-style frets.
With Vintage-Style '60s Single-Coil Jazzmaster pickups and distinctive controls, it revives the classic sounds used by jazz guitarists and in surf music of that era.
There are numerous small dents with paint chips and indentations on the headstock, and there is a paint crack at the neck joint.
There are several small dents with indentations on both sides of the body, and the hardware shows some tarnish and fine rust.
There are overall scratches and small dents.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: MX22303677
Year of Manufacture: 2023
Country of Manufacture: Mexico
Case: Non-original gig bag
Accessories: Arm
Weight: 3.73 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 24.1 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It recreates early 1960s specifications, including the Spaghetti logo, a rosewood fingerboard with a slab profile, and dot inlays.
Not only the appearance but also the neck shape is inspired by vintage models, featuring a Mid-60s C-shape with a 7.25-inch fingerboard radius and vintage-style frets.
With Vintage-Style '60s Single-Coil Jazzmaster pickups and distinctive controls, it revives the classic sounds used by jazz guitarists and in surf music of that era.
There are numerous small dents with paint chips and indentations on the headstock, and there is a paint crack at the neck joint.
There are several small dents with indentations on both sides of the body, and the hardware shows some tarnish and fine rust.
There are overall scratches and small dents.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: MX22303677
Year of Manufacture: 2023
Country of Manufacture: Mexico
Case: Non-original gig bag
Accessories: Arm
Weight: 3.73 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 24.1 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$6.22
[SN MX22303677] USED FENDER MEXICO / Vintera 60s Jazzmaster Olympic White [20]—
$6.22
Description
A Jazzmaster that recreates the vintage sound and look.
It recreates early 1960s specifications, including the Spaghetti logo, a rosewood fingerboard with a slab profile, and dot inlays.
Not only the appearance but also the neck shape is inspired by vintage models, featuring a Mid-60s C-shape with a 7.25-inch fingerboard radius and vintage-style frets.
With Vintage-Style '60s Single-Coil Jazzmaster pickups and distinctive controls, it revives the classic sounds used by jazz guitarists and in surf music of that era.
There are numerous small dents with paint chips and indentations on the headstock, and there is a paint crack at the neck joint.
There are several small dents with indentations on both sides of the body, and the hardware shows some tarnish and fine rust.
There are overall scratches and small dents.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: MX22303677
Year of Manufacture: 2023
Country of Manufacture: Mexico
Case: Non-original gig bag
Accessories: Arm
Weight: 3.73 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 24.1 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It recreates early 1960s specifications, including the Spaghetti logo, a rosewood fingerboard with a slab profile, and dot inlays.
Not only the appearance but also the neck shape is inspired by vintage models, featuring a Mid-60s C-shape with a 7.25-inch fingerboard radius and vintage-style frets.
With Vintage-Style '60s Single-Coil Jazzmaster pickups and distinctive controls, it revives the classic sounds used by jazz guitarists and in surf music of that era.
There are numerous small dents with paint chips and indentations on the headstock, and there is a paint crack at the neck joint.
There are several small dents with indentations on both sides of the body, and the hardware shows some tarnish and fine rust.
There are overall scratches and small dents.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: MX22303677
Year of Manufacture: 2023
Country of Manufacture: Mexico
Case: Non-original gig bag
Accessories: Arm
Weight: 3.73 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 24.1 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
