🎉 Up to 70% Off Selected ItemsShop Sale
USED ARGUS / 5-string banjo flower [03]
We have received a used Argus 5-string banjo, the "Flower." It is an older banjo made in Japan during the 1970s and 1980s.
The "Flower" was manufactured as a professional-grade model at the time, featuring a 3-ply curly maple wood rim, with maple used for the neck and resonator as well, and finished in a see-through violet color.
It comes equipped with a slide capo, making it a banjo recommended for both serious players and beginners.
The tailpiece and bridge have been replaced.
Cracks along the rim’s edge and inner side have been repaired. While there are some dents and tarnish on the metal hardware, it plays well and sounds great, so we highly recommend it.
A hard case is included.
Condition: B
Truss Rod: Approximately 90 degrees of adjustment remaining (tightening direction) / Adjustment remaining (loosening direction)
Neck Condition: No issues
Frets: Approximately 80% remaining
Case: Hard case (with stickers)
Condition: B+: Some minor scratches, but no issues for normal use
Case: Hard case
Truss Rod: Note: Tested up to 60 degrees in both directions with no issues (some wear remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 1.7mm at the 12th fret
String Height (Treble Side): 1.7 mm at the 12th fret
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, repair of 3 wood cracks, headstock replacement, bridge replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The "Flower" was manufactured as a professional-grade model at the time, featuring a 3-ply curly maple wood rim, with maple used for the neck and resonator as well, and finished in a see-through violet color.
It comes equipped with a slide capo, making it a banjo recommended for both serious players and beginners.
The tailpiece and bridge have been replaced.
Cracks along the rim’s edge and inner side have been repaired. While there are some dents and tarnish on the metal hardware, it plays well and sounds great, so we highly recommend it.
A hard case is included.
Condition: B
Truss Rod: Approximately 90 degrees of adjustment remaining (tightening direction) / Adjustment remaining (loosening direction)
Neck Condition: No issues
Frets: Approximately 80% remaining
Case: Hard case (with stickers)
Condition: B+: Some minor scratches, but no issues for normal use
Case: Hard case
Truss Rod: Note: Tested up to 60 degrees in both directions with no issues (some wear remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 1.7mm at the 12th fret
String Height (Treble Side): 1.7 mm at the 12th fret
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, repair of 3 wood cracks, headstock replacement, bridge replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$1.32
Original: $3.77
-65%USED ARGUS / 5-string banjo flower [03]—
$3.77
$1.32
Description
We have received a used Argus 5-string banjo, the "Flower." It is an older banjo made in Japan during the 1970s and 1980s.
The "Flower" was manufactured as a professional-grade model at the time, featuring a 3-ply curly maple wood rim, with maple used for the neck and resonator as well, and finished in a see-through violet color.
It comes equipped with a slide capo, making it a banjo recommended for both serious players and beginners.
The tailpiece and bridge have been replaced.
Cracks along the rim’s edge and inner side have been repaired. While there are some dents and tarnish on the metal hardware, it plays well and sounds great, so we highly recommend it.
A hard case is included.
Condition: B
Truss Rod: Approximately 90 degrees of adjustment remaining (tightening direction) / Adjustment remaining (loosening direction)
Neck Condition: No issues
Frets: Approximately 80% remaining
Case: Hard case (with stickers)
Condition: B+: Some minor scratches, but no issues for normal use
Case: Hard case
Truss Rod: Note: Tested up to 60 degrees in both directions with no issues (some wear remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 1.7mm at the 12th fret
String Height (Treble Side): 1.7 mm at the 12th fret
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, repair of 3 wood cracks, headstock replacement, bridge replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The "Flower" was manufactured as a professional-grade model at the time, featuring a 3-ply curly maple wood rim, with maple used for the neck and resonator as well, and finished in a see-through violet color.
It comes equipped with a slide capo, making it a banjo recommended for both serious players and beginners.
The tailpiece and bridge have been replaced.
Cracks along the rim’s edge and inner side have been repaired. While there are some dents and tarnish on the metal hardware, it plays well and sounds great, so we highly recommend it.
A hard case is included.
Condition: B
Truss Rod: Approximately 90 degrees of adjustment remaining (tightening direction) / Adjustment remaining (loosening direction)
Neck Condition: No issues
Frets: Approximately 80% remaining
Case: Hard case (with stickers)
Condition: B+: Some minor scratches, but no issues for normal use
Case: Hard case
Truss Rod: Note: Tested up to 60 degrees in both directions with no issues (some wear remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 1.7mm at the 12th fret
String Height (Treble Side): 1.7 mm at the 12th fret
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, repair of 3 wood cracks, headstock replacement, bridge replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
