🎉 Up to 70% Off Selected ItemsShop Sale
USED MARTIN / MC-68AJ [03]
We have received a used Martin MC-68.
The MC-68 is an acoustic guitar manufactured by C.F. Martin from around 1985 to 1995, and this particular instrument was made in 1994.
It features a spruce top and maple sides and back, with an ebony fingerboard.
It features a slightly larger M-size body than the OM, with a cutaway, producing a well-balanced sound.
It has a fast attack, a clear and articulate tone, tight bass, and distinct mid-to-high frequencies.
There is some bulging around the bridge and a kink in the neck joint, and the string height at the 12th fret on the 6th string is approximately 3.5 mm, which is on the high side.
There are weather checking, dents, and pick scratches throughout the body.
A strap pin is attached to the neck heel.
A large area on the side of the body has been repaired for a crack, and the bridge has been reattached.
Due to shrinkage of the binding on the side of the fingerboard, there is a gap near the nut, and there is a crack in the binding at the 12th fret position mark.
There are signs that the pickups have been removed, and the endpin has been replaced.
The body binding has been re-glued.
The bridge has been shaved down slightly, and the saddle has been filed low.
The truss rod is fully tightened, and the neck has a positive bow.
Condition: B
Truss Rod: No play
Neck Condition: Positive bow, slight dip
Frets: 70%
Case: Original hard case (broken hinge)
Condition: B: Shows significant wear and signs of use, but is in good working condition for normal use
Year of Manufacture: 1990s
Case: Hard case
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal limits; fret height is sufficient for playable performance
String Height (Low String Side): 2.7 mm at the 12th fret
String height (treble side): 2.2 mm at the 12th fret
Strings at Setup: D'Addario EJ-16 / .012-.053 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, iron correction, leveling, bridge crimping, binding re-gluing (1), bracing re-gluing (7), bridge top surface machining, saddle adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
The MC-68 is an acoustic guitar manufactured by C.F. Martin from around 1985 to 1995, and this particular instrument was made in 1994.
It features a spruce top and maple sides and back, with an ebony fingerboard.
It features a slightly larger M-size body than the OM, with a cutaway, producing a well-balanced sound.
It has a fast attack, a clear and articulate tone, tight bass, and distinct mid-to-high frequencies.
There is some bulging around the bridge and a kink in the neck joint, and the string height at the 12th fret on the 6th string is approximately 3.5 mm, which is on the high side.
There are weather checking, dents, and pick scratches throughout the body.
A strap pin is attached to the neck heel.
A large area on the side of the body has been repaired for a crack, and the bridge has been reattached.
Due to shrinkage of the binding on the side of the fingerboard, there is a gap near the nut, and there is a crack in the binding at the 12th fret position mark.
There are signs that the pickups have been removed, and the endpin has been replaced.
The body binding has been re-glued.
The bridge has been shaved down slightly, and the saddle has been filed low.
The truss rod is fully tightened, and the neck has a positive bow.
Condition: B
Truss Rod: No play
Neck Condition: Positive bow, slight dip
Frets: 70%
Case: Original hard case (broken hinge)
Condition: B: Shows significant wear and signs of use, but is in good working condition for normal use
Year of Manufacture: 1990s
Case: Hard case
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal limits; fret height is sufficient for playable performance
String Height (Low String Side): 2.7 mm at the 12th fret
String height (treble side): 2.2 mm at the 12th fret
Strings at Setup: D'Addario EJ-16 / .012-.053 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, iron correction, leveling, bridge crimping, binding re-gluing (1), bracing re-gluing (7), bridge top surface machining, saddle adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
$4.31
Original: $12.32
-65%USED MARTIN / MC-68AJ [03]—
$12.32
$4.31
Description
We have received a used Martin MC-68.
The MC-68 is an acoustic guitar manufactured by C.F. Martin from around 1985 to 1995, and this particular instrument was made in 1994.
It features a spruce top and maple sides and back, with an ebony fingerboard.
It features a slightly larger M-size body than the OM, with a cutaway, producing a well-balanced sound.
It has a fast attack, a clear and articulate tone, tight bass, and distinct mid-to-high frequencies.
There is some bulging around the bridge and a kink in the neck joint, and the string height at the 12th fret on the 6th string is approximately 3.5 mm, which is on the high side.
There are weather checking, dents, and pick scratches throughout the body.
A strap pin is attached to the neck heel.
A large area on the side of the body has been repaired for a crack, and the bridge has been reattached.
Due to shrinkage of the binding on the side of the fingerboard, there is a gap near the nut, and there is a crack in the binding at the 12th fret position mark.
There are signs that the pickups have been removed, and the endpin has been replaced.
The body binding has been re-glued.
The bridge has been shaved down slightly, and the saddle has been filed low.
The truss rod is fully tightened, and the neck has a positive bow.
Condition: B
Truss Rod: No play
Neck Condition: Positive bow, slight dip
Frets: 70%
Case: Original hard case (broken hinge)
Condition: B: Shows significant wear and signs of use, but is in good working condition for normal use
Year of Manufacture: 1990s
Case: Hard case
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal limits; fret height is sufficient for playable performance
String Height (Low String Side): 2.7 mm at the 12th fret
String height (treble side): 2.2 mm at the 12th fret
Strings at Setup: D'Addario EJ-16 / .012-.053 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, iron correction, leveling, bridge crimping, binding re-gluing (1), bracing re-gluing (7), bridge top surface machining, saddle adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
The MC-68 is an acoustic guitar manufactured by C.F. Martin from around 1985 to 1995, and this particular instrument was made in 1994.
It features a spruce top and maple sides and back, with an ebony fingerboard.
It features a slightly larger M-size body than the OM, with a cutaway, producing a well-balanced sound.
It has a fast attack, a clear and articulate tone, tight bass, and distinct mid-to-high frequencies.
There is some bulging around the bridge and a kink in the neck joint, and the string height at the 12th fret on the 6th string is approximately 3.5 mm, which is on the high side.
There are weather checking, dents, and pick scratches throughout the body.
A strap pin is attached to the neck heel.
A large area on the side of the body has been repaired for a crack, and the bridge has been reattached.
Due to shrinkage of the binding on the side of the fingerboard, there is a gap near the nut, and there is a crack in the binding at the 12th fret position mark.
There are signs that the pickups have been removed, and the endpin has been replaced.
The body binding has been re-glued.
The bridge has been shaved down slightly, and the saddle has been filed low.
The truss rod is fully tightened, and the neck has a positive bow.
Condition: B
Truss Rod: No play
Neck Condition: Positive bow, slight dip
Frets: 70%
Case: Original hard case (broken hinge)
Condition: B: Shows significant wear and signs of use, but is in good working condition for normal use
Year of Manufacture: 1990s
Case: Hard case
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal limits; fret height is sufficient for playable performance
String Height (Low String Side): 2.7 mm at the 12th fret
String height (treble side): 2.2 mm at the 12th fret
Strings at Setup: D'Addario EJ-16 / .012-.053 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, iron correction, leveling, bridge crimping, binding re-gluing (1), bracing re-gluing (7), bridge top surface machining, saddle adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
