🎉 Up to 70% Off Selected ItemsShop Sale
[SN 216630055] USED GIBSON USA / 80s Flying V Ebony [06]
We’ve just received a used Gibson 2023 model 80s Flying V equipped with 80s Tribute pickups!
The Gibson 80s Flying V is based on the highly popular 1984 model. It features a slim-tapered mahogany neck suitable for technical playing, paired with a rosewood fingerboard.
The iconic mahogany body is equipped with new 80s Tribute pickups that faithfully reproduce the fat tone and rich sustain characteristic of the original models.
The 80s Tribute Pickup offers a warmer tone than ceramic magnets and higher touch sensitivity than Alnico II, III, and IV magnets; it utilizes Alnico V magnets for their excellent balance of output and tonal characteristics.
This pickup was developed to recreate the hard rock sound of the 1980s.
The bridge pickup provides high output and a tight response when playing at high gain, while the neck pickup delivers a clear and tight voice when playing at high gain.
There are numerous fine scratches throughout the body and the back of the neck, and there is paint wear on the top of the headstock that appears to be from clip-on tuners.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 216630055
Year of Manufacture: 2023
Country of Manufacture: USA
Case: Hard case
Accessories: Instruction manual
Weight: 3.01 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 44.0 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The Gibson 80s Flying V is based on the highly popular 1984 model. It features a slim-tapered mahogany neck suitable for technical playing, paired with a rosewood fingerboard.
The iconic mahogany body is equipped with new 80s Tribute pickups that faithfully reproduce the fat tone and rich sustain characteristic of the original models.
The 80s Tribute Pickup offers a warmer tone than ceramic magnets and higher touch sensitivity than Alnico II, III, and IV magnets; it utilizes Alnico V magnets for their excellent balance of output and tonal characteristics.
This pickup was developed to recreate the hard rock sound of the 1980s.
The bridge pickup provides high output and a tight response when playing at high gain, while the neck pickup delivers a clear and tight voice when playing at high gain.
There are numerous fine scratches throughout the body and the back of the neck, and there is paint wear on the top of the headstock that appears to be from clip-on tuners.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 216630055
Year of Manufacture: 2023
Country of Manufacture: USA
Case: Hard case
Accessories: Instruction manual
Weight: 3.01 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 44.0 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$3.34
Original: $9.54
-65%[SN 216630055] USED GIBSON USA / 80s Flying V Ebony [06]—
$9.54
$3.34
Description
We’ve just received a used Gibson 2023 model 80s Flying V equipped with 80s Tribute pickups!
The Gibson 80s Flying V is based on the highly popular 1984 model. It features a slim-tapered mahogany neck suitable for technical playing, paired with a rosewood fingerboard.
The iconic mahogany body is equipped with new 80s Tribute pickups that faithfully reproduce the fat tone and rich sustain characteristic of the original models.
The 80s Tribute Pickup offers a warmer tone than ceramic magnets and higher touch sensitivity than Alnico II, III, and IV magnets; it utilizes Alnico V magnets for their excellent balance of output and tonal characteristics.
This pickup was developed to recreate the hard rock sound of the 1980s.
The bridge pickup provides high output and a tight response when playing at high gain, while the neck pickup delivers a clear and tight voice when playing at high gain.
There are numerous fine scratches throughout the body and the back of the neck, and there is paint wear on the top of the headstock that appears to be from clip-on tuners.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 216630055
Year of Manufacture: 2023
Country of Manufacture: USA
Case: Hard case
Accessories: Instruction manual
Weight: 3.01 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 44.0 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The Gibson 80s Flying V is based on the highly popular 1984 model. It features a slim-tapered mahogany neck suitable for technical playing, paired with a rosewood fingerboard.
The iconic mahogany body is equipped with new 80s Tribute pickups that faithfully reproduce the fat tone and rich sustain characteristic of the original models.
The 80s Tribute Pickup offers a warmer tone than ceramic magnets and higher touch sensitivity than Alnico II, III, and IV magnets; it utilizes Alnico V magnets for their excellent balance of output and tonal characteristics.
This pickup was developed to recreate the hard rock sound of the 1980s.
The bridge pickup provides high output and a tight response when playing at high gain, while the neck pickup delivers a clear and tight voice when playing at high gain.
There are numerous fine scratches throughout the body and the back of the neck, and there is paint wear on the top of the headstock that appears to be from clip-on tuners.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 216630055
Year of Manufacture: 2023
Country of Manufacture: USA
Case: Hard case
Accessories: Instruction manual
Weight: 3.01 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 44.0 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
