🎉 Up to 70% Off Selected ItemsShop Sale
[SN 886916] USED Gibson / J-160E Square Shoulder P-90 [10]
One after the transition to square shoulders!
* The item shown in the picture is everything including accessories.
* If there are any problems during the final check before shipping, we will inform you separately.
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We are sorry to inform you that this item is sold out after you place an order, but we try to delete the information as soon as possible.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial number: 886916
Year of manufacture: circa 1970
Country of manufacture: USA
Case: Hard case with Gibson logo, probably circa 1970
Accessories: None
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Levels: Still good for cutting but the frets are low.
String Height Low String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 9th fret: 24.7mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Other: There are some damages on the brand logo and crown inlay on the top of the head due to the peeling of the paint, but you can feel the age of the instrument. There are some noticeable wear on the frets (1F-7F, etc.), but since there is a possibility that these are original frets, we respect the vintage enthusiast with a long career and consider them to be in their current condition. Grounding treatment has been applied from the ball end of the strings, but we cannot determine the authenticity of the brass plate on the bridge plate inside the body, whether it is original, non-original, or a modification such as replacement, etc. Please understand that we are unable to determine. The entire body is covered with paint film cracks, but there was no strange discomfort when checking visually or with a black light in a dark room, so we believe it is original, including the color.
* There are scratches, dents, etc. that are not easily shown in the photos or described for used products. Please understand this in advance.
* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
* The item shown in the picture is everything including accessories.
* If there are any problems during the final check before shipping, we will inform you separately.
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We are sorry to inform you that this item is sold out after you place an order, but we try to delete the information as soon as possible.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial number: 886916
Year of manufacture: circa 1970
Country of manufacture: USA
Case: Hard case with Gibson logo, probably circa 1970
Accessories: None
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Levels: Still good for cutting but the frets are low.
String Height Low String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 9th fret: 24.7mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Other: There are some damages on the brand logo and crown inlay on the top of the head due to the peeling of the paint, but you can feel the age of the instrument. There are some noticeable wear on the frets (1F-7F, etc.), but since there is a possibility that these are original frets, we respect the vintage enthusiast with a long career and consider them to be in their current condition. Grounding treatment has been applied from the ball end of the strings, but we cannot determine the authenticity of the brass plate on the bridge plate inside the body, whether it is original, non-original, or a modification such as replacement, etc. Please understand that we are unable to determine. The entire body is covered with paint film cracks, but there was no strange discomfort when checking visually or with a black light in a dark room, so we believe it is original, including the color.
* There are scratches, dents, etc. that are not easily shown in the photos or described for used products. Please understand this in advance.
* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$15.61
[SN 886916] USED Gibson / J-160E Square Shoulder P-90 [10]—
$15.61
Description
One after the transition to square shoulders!
* The item shown in the picture is everything including accessories.
* If there are any problems during the final check before shipping, we will inform you separately.
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We are sorry to inform you that this item is sold out after you place an order, but we try to delete the information as soon as possible.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial number: 886916
Year of manufacture: circa 1970
Country of manufacture: USA
Case: Hard case with Gibson logo, probably circa 1970
Accessories: None
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Levels: Still good for cutting but the frets are low.
String Height Low String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 9th fret: 24.7mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Other: There are some damages on the brand logo and crown inlay on the top of the head due to the peeling of the paint, but you can feel the age of the instrument. There are some noticeable wear on the frets (1F-7F, etc.), but since there is a possibility that these are original frets, we respect the vintage enthusiast with a long career and consider them to be in their current condition. Grounding treatment has been applied from the ball end of the strings, but we cannot determine the authenticity of the brass plate on the bridge plate inside the body, whether it is original, non-original, or a modification such as replacement, etc. Please understand that we are unable to determine. The entire body is covered with paint film cracks, but there was no strange discomfort when checking visually or with a black light in a dark room, so we believe it is original, including the color.
* There are scratches, dents, etc. that are not easily shown in the photos or described for used products. Please understand this in advance.
* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
* The item shown in the picture is everything including accessories.
* If there are any problems during the final check before shipping, we will inform you separately.
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We are sorry to inform you that this item is sold out after you place an order, but we try to delete the information as soon as possible.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial number: 886916
Year of manufacture: circa 1970
Country of manufacture: USA
Case: Hard case with Gibson logo, probably circa 1970
Accessories: None
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Levels: Still good for cutting but the frets are low.
String Height Low String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 9th fret: 24.7mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Other: There are some damages on the brand logo and crown inlay on the top of the head due to the peeling of the paint, but you can feel the age of the instrument. There are some noticeable wear on the frets (1F-7F, etc.), but since there is a possibility that these are original frets, we respect the vintage enthusiast with a long career and consider them to be in their current condition. Grounding treatment has been applied from the ball end of the strings, but we cannot determine the authenticity of the brass plate on the bridge plate inside the body, whether it is original, non-original, or a modification such as replacement, etc. Please understand that we are unable to determine. The entire body is covered with paint film cracks, but there was no strange discomfort when checking visually or with a black light in a dark room, so we believe it is original, including the color.
* There are scratches, dents, etc. that are not easily shown in the photos or described for used products. Please understand this in advance.
* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
