🎉 Up to 70% Off Selected ItemsShop Sale
[SN 83090610] USED GIBSON USA / Les Paul Standard Cherry Sunburst 1980 [03]
We are pleased to announce the arrival of a 1980 Gibson USA/Les Paul Standard Cherry Sunburst!
* We have determined that it was made in 1980 based on the serial number and other specifications.
The body has a 3-piece maple top and mahogany back, 3-piece maple neck, and rosewood fingerboard, standard specs seen since the late 70s.
The back of the neck has a volute, which is typical of this era, and the neck shape has a thin grip.
The sticker "Authorized Instrument NIHON GIBSON" is still attached on the back of the head.
Original Schaller flower engraved pegs are installed.
Two original engraved numbered PAF pickups are installed.
There are some signs of solder re-soldering inside the cavity. DC resistance of both front and rear pickups is approximately 7.4k.
The maple neck gives it a 70s sound with a sense of attack.
The pots on this guitar are also considered to be the original ones from the pot dates.
Volume pot: 1378017 x 2 Tone pot: 1378011 x 2
As for the condition, there are many scratches, dents, and scuff marks throughout. There are also some white stains on the back of the body.
There are also paint cracks on the neck binding, bumps due to thinning of the neck binding, and peeling of the paint on the back of the neck.
Other than the above, the nut, frets, control knobs, etc. appear to be original, but the toggle switch cap has been replaced.
The toggle switch cap has been replaced, and some of the screws for the escutcheon screws have been broken off.
The frets have been worn out and there is about 50% remaining.
As for the accessories, the case is a non-genuine hard case only.
Although there is a sense of use commensurate with the age of the instrument, it remains in relatively clean condition, and there are no problems with the playing surface.
It is a 1980 Les Paul Standard that still retains the atmosphere of the late 70s!
It is one of the few original Les Pauls with only a few replacement parts!
The price of 80s Les Pauls has been gradually rising in recent years, so please consider this as a good opportunity to buy one!
Truss Rod: Slightly roomy in the tightening direction / roomy in the loosening direction
Neck Condition: No problem as it is now.
Fret: about 50%.
Case: Non-authentic hard case
Accessories: None
Serial Number:83090610
Weight: 4.33?
* Due to the nature of this product, we are unable to move it between stores.
Item Rank: B: Fairly scratched and used, but no problem in normal use.
Serial number: 83090610
Year of manufacture: 1980
Country of manufacture: USA
Case: Hard Case
Weight: 4.33kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.49mm
Neck thickness near 1st fret: 22.60mm
Neck thickness near 12th fret: 25.16mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
* We have determined that it was made in 1980 based on the serial number and other specifications.
The body has a 3-piece maple top and mahogany back, 3-piece maple neck, and rosewood fingerboard, standard specs seen since the late 70s.
The back of the neck has a volute, which is typical of this era, and the neck shape has a thin grip.
The sticker "Authorized Instrument NIHON GIBSON" is still attached on the back of the head.
Original Schaller flower engraved pegs are installed.
Two original engraved numbered PAF pickups are installed.
There are some signs of solder re-soldering inside the cavity. DC resistance of both front and rear pickups is approximately 7.4k.
The maple neck gives it a 70s sound with a sense of attack.
The pots on this guitar are also considered to be the original ones from the pot dates.
Volume pot: 1378017 x 2 Tone pot: 1378011 x 2
As for the condition, there are many scratches, dents, and scuff marks throughout. There are also some white stains on the back of the body.
There are also paint cracks on the neck binding, bumps due to thinning of the neck binding, and peeling of the paint on the back of the neck.
Other than the above, the nut, frets, control knobs, etc. appear to be original, but the toggle switch cap has been replaced.
The toggle switch cap has been replaced, and some of the screws for the escutcheon screws have been broken off.
The frets have been worn out and there is about 50% remaining.
As for the accessories, the case is a non-genuine hard case only.
Although there is a sense of use commensurate with the age of the instrument, it remains in relatively clean condition, and there are no problems with the playing surface.
It is a 1980 Les Paul Standard that still retains the atmosphere of the late 70s!
It is one of the few original Les Pauls with only a few replacement parts!
The price of 80s Les Pauls has been gradually rising in recent years, so please consider this as a good opportunity to buy one!
Truss Rod: Slightly roomy in the tightening direction / roomy in the loosening direction
Neck Condition: No problem as it is now.
Fret: about 50%.
Case: Non-authentic hard case
Accessories: None
Serial Number:83090610
Weight: 4.33?
* Due to the nature of this product, we are unable to move it between stores.
Item Rank: B: Fairly scratched and used, but no problem in normal use.
Serial number: 83090610
Year of manufacture: 1980
Country of manufacture: USA
Case: Hard Case
Weight: 4.33kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.49mm
Neck thickness near 1st fret: 22.60mm
Neck thickness near 12th fret: 25.16mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$5.61
Original: $16.02
-65%[SN 83090610] USED GIBSON USA / Les Paul Standard Cherry Sunburst 1980 [03]—
$16.02
$5.61
Description
We are pleased to announce the arrival of a 1980 Gibson USA/Les Paul Standard Cherry Sunburst!
* We have determined that it was made in 1980 based on the serial number and other specifications.
The body has a 3-piece maple top and mahogany back, 3-piece maple neck, and rosewood fingerboard, standard specs seen since the late 70s.
The back of the neck has a volute, which is typical of this era, and the neck shape has a thin grip.
The sticker "Authorized Instrument NIHON GIBSON" is still attached on the back of the head.
Original Schaller flower engraved pegs are installed.
Two original engraved numbered PAF pickups are installed.
There are some signs of solder re-soldering inside the cavity. DC resistance of both front and rear pickups is approximately 7.4k.
The maple neck gives it a 70s sound with a sense of attack.
The pots on this guitar are also considered to be the original ones from the pot dates.
Volume pot: 1378017 x 2 Tone pot: 1378011 x 2
As for the condition, there are many scratches, dents, and scuff marks throughout. There are also some white stains on the back of the body.
There are also paint cracks on the neck binding, bumps due to thinning of the neck binding, and peeling of the paint on the back of the neck.
Other than the above, the nut, frets, control knobs, etc. appear to be original, but the toggle switch cap has been replaced.
The toggle switch cap has been replaced, and some of the screws for the escutcheon screws have been broken off.
The frets have been worn out and there is about 50% remaining.
As for the accessories, the case is a non-genuine hard case only.
Although there is a sense of use commensurate with the age of the instrument, it remains in relatively clean condition, and there are no problems with the playing surface.
It is a 1980 Les Paul Standard that still retains the atmosphere of the late 70s!
It is one of the few original Les Pauls with only a few replacement parts!
The price of 80s Les Pauls has been gradually rising in recent years, so please consider this as a good opportunity to buy one!
Truss Rod: Slightly roomy in the tightening direction / roomy in the loosening direction
Neck Condition: No problem as it is now.
Fret: about 50%.
Case: Non-authentic hard case
Accessories: None
Serial Number:83090610
Weight: 4.33?
* Due to the nature of this product, we are unable to move it between stores.
Item Rank: B: Fairly scratched and used, but no problem in normal use.
Serial number: 83090610
Year of manufacture: 1980
Country of manufacture: USA
Case: Hard Case
Weight: 4.33kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.49mm
Neck thickness near 1st fret: 22.60mm
Neck thickness near 12th fret: 25.16mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
* We have determined that it was made in 1980 based on the serial number and other specifications.
The body has a 3-piece maple top and mahogany back, 3-piece maple neck, and rosewood fingerboard, standard specs seen since the late 70s.
The back of the neck has a volute, which is typical of this era, and the neck shape has a thin grip.
The sticker "Authorized Instrument NIHON GIBSON" is still attached on the back of the head.
Original Schaller flower engraved pegs are installed.
Two original engraved numbered PAF pickups are installed.
There are some signs of solder re-soldering inside the cavity. DC resistance of both front and rear pickups is approximately 7.4k.
The maple neck gives it a 70s sound with a sense of attack.
The pots on this guitar are also considered to be the original ones from the pot dates.
Volume pot: 1378017 x 2 Tone pot: 1378011 x 2
As for the condition, there are many scratches, dents, and scuff marks throughout. There are also some white stains on the back of the body.
There are also paint cracks on the neck binding, bumps due to thinning of the neck binding, and peeling of the paint on the back of the neck.
Other than the above, the nut, frets, control knobs, etc. appear to be original, but the toggle switch cap has been replaced.
The toggle switch cap has been replaced, and some of the screws for the escutcheon screws have been broken off.
The frets have been worn out and there is about 50% remaining.
As for the accessories, the case is a non-genuine hard case only.
Although there is a sense of use commensurate with the age of the instrument, it remains in relatively clean condition, and there are no problems with the playing surface.
It is a 1980 Les Paul Standard that still retains the atmosphere of the late 70s!
It is one of the few original Les Pauls with only a few replacement parts!
The price of 80s Les Pauls has been gradually rising in recent years, so please consider this as a good opportunity to buy one!
Truss Rod: Slightly roomy in the tightening direction / roomy in the loosening direction
Neck Condition: No problem as it is now.
Fret: about 50%.
Case: Non-authentic hard case
Accessories: None
Serial Number:83090610
Weight: 4.33?
* Due to the nature of this product, we are unable to move it between stores.
Item Rank: B: Fairly scratched and used, but no problem in normal use.
Serial number: 83090610
Year of manufacture: 1980
Country of manufacture: USA
Case: Hard Case
Weight: 4.33kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.49mm
Neck thickness near 1st fret: 22.60mm
Neck thickness near 12th fret: 25.16mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
