🎉 Up to 70% Off Selected ItemsShop Sale
[SN 80119524] USED GIBSON USA / ES-347S Antique Natural [03]
Used 1989 GIBSON USA/ES-347S Antique Natural is now in stock!
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
The tailpiece has been replaced, the nut has been re-nutted, and there is a crack repaired on the last side of the fingerboard.
There are paint cracks, minor dents and scratches on the entire body. There is a large scratch near the cutaway on the top of the body, and some parts are dull.
This item has been cleaned, maintained, and set up by our repair department.
* Due to the nature of this item, we are unable to move it from one store to another.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 80119524
Year of manufacture: 1989
Country of manufacture: USA
Case: Hard Case
Weight: 4.12kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.60mm
Neck thickness near 1st fret: 20.12mm
Neck thickness near 12th fret: 24.64mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
The tailpiece has been replaced, the nut has been re-nutted, and there is a crack repaired on the last side of the fingerboard.
There are paint cracks, minor dents and scratches on the entire body. There is a large scratch near the cutaway on the top of the body, and some parts are dull.
This item has been cleaned, maintained, and set up by our repair department.
* Due to the nature of this item, we are unable to move it from one store to another.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 80119524
Year of manufacture: 1989
Country of manufacture: USA
Case: Hard Case
Weight: 4.12kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.60mm
Neck thickness near 1st fret: 20.12mm
Neck thickness near 12th fret: 24.64mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$6.90
Original: $19.71
-65%[SN 80119524] USED GIBSON USA / ES-347S Antique Natural [03]—
$19.71
$6.90
Description
Used 1989 GIBSON USA/ES-347S Antique Natural is now in stock!
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
The tailpiece has been replaced, the nut has been re-nutted, and there is a crack repaired on the last side of the fingerboard.
There are paint cracks, minor dents and scratches on the entire body. There is a large scratch near the cutaway on the top of the body, and some parts are dull.
This item has been cleaned, maintained, and set up by our repair department.
* Due to the nature of this item, we are unable to move it from one store to another.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 80119524
Year of manufacture: 1989
Country of manufacture: USA
Case: Hard Case
Weight: 4.12kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.60mm
Neck thickness near 1st fret: 20.12mm
Neck thickness near 12th fret: 24.64mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
The tailpiece has been replaced, the nut has been re-nutted, and there is a crack repaired on the last side of the fingerboard.
There are paint cracks, minor dents and scratches on the entire body. There is a large scratch near the cutaway on the top of the body, and some parts are dull.
This item has been cleaned, maintained, and set up by our repair department.
* Due to the nature of this item, we are unable to move it from one store to another.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 80119524
Year of manufacture: 1989
Country of manufacture: USA
Case: Hard Case
Weight: 4.12kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.60mm
Neck thickness near 1st fret: 20.12mm
Neck thickness near 12th fret: 24.64mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
