🎉 Up to 70% Off Selected ItemsShop Sale
[SN V152084] USED FENDER USA / AM VIN 62 ST TL/3CS [03]
FENDER USA / AM VIN 62 ST TL/3CS in used condition.
Arm and hard case included.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
The pickguard is sunburned, and there are some scratches throughout, but the strings have been replaced with new ones, and each part has been cleaned, maintained, and set up by our repair department.
Item Rank: B: Fairly scratched and worn, but no problems in normal use.
Serial Number: V152084
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.47kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.66mm
Neck thickness near 1st fret: 20.82mm
Neck thickness near 12th fret: 23.20mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise adjustment, back panel screw installation x 6
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Arm and hard case included.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
The pickguard is sunburned, and there are some scratches throughout, but the strings have been replaced with new ones, and each part has been cleaned, maintained, and set up by our repair department.
Item Rank: B: Fairly scratched and worn, but no problems in normal use.
Serial Number: V152084
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.47kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.66mm
Neck thickness near 1st fret: 20.82mm
Neck thickness near 12th fret: 23.20mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise adjustment, back panel screw installation x 6
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$3.77
Original: $10.78
-65%[SN V152084] USED FENDER USA / AM VIN 62 ST TL/3CS [03]—
$10.78
$3.77
Description
FENDER USA / AM VIN 62 ST TL/3CS in used condition.
Arm and hard case included.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
The pickguard is sunburned, and there are some scratches throughout, but the strings have been replaced with new ones, and each part has been cleaned, maintained, and set up by our repair department.
Item Rank: B: Fairly scratched and worn, but no problems in normal use.
Serial Number: V152084
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.47kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.66mm
Neck thickness near 1st fret: 20.82mm
Neck thickness near 12th fret: 23.20mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise adjustment, back panel screw installation x 6
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Arm and hard case included.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
The pickguard is sunburned, and there are some scratches throughout, but the strings have been replaced with new ones, and each part has been cleaned, maintained, and set up by our repair department.
Item Rank: B: Fairly scratched and worn, but no problems in normal use.
Serial Number: V152084
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.47kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.66mm
Neck thickness near 1st fret: 20.82mm
Neck thickness near 12th fret: 23.20mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise adjustment, back panel screw installation x 6
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
