🎉 Up to 70% Off Selected ItemsShop Sale
[SN SZ7077137] USED FENDER USA / Eric Clapton "Blackie" NOISELESS [03]
FENDER USA / Eric Clapton "Blackie" NOISELESS in used condition.
Includes: genuine hard case, arm, 2 springs, and manual.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
There are scratches on the tip of the head, metal parts are dull and rusty, pick guard is dirty, sticker marks, and the back plate is distorted. Also, there are many dents and scratches on the entire body. The switch knob has been replaced.
This item has been cleaned, maintained, and set up by our repair department.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial number: SZ7077137
Year of manufacture: 2007
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.53kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Includes: genuine hard case, arm, 2 springs, and manual.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
There are scratches on the tip of the head, metal parts are dull and rusty, pick guard is dirty, sticker marks, and the back plate is distorted. Also, there are many dents and scratches on the entire body. The switch knob has been replaced.
This item has been cleaned, maintained, and set up by our repair department.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial number: SZ7077137
Year of manufacture: 2007
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.53kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$3.14
Original: $8.97
-65%[SN SZ7077137] USED FENDER USA / Eric Clapton "Blackie" NOISELESS [03]—
$8.97
$3.14
Description
FENDER USA / Eric Clapton "Blackie" NOISELESS in used condition.
Includes: genuine hard case, arm, 2 springs, and manual.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
There are scratches on the tip of the head, metal parts are dull and rusty, pick guard is dirty, sticker marks, and the back plate is distorted. Also, there are many dents and scratches on the entire body. The switch knob has been replaced.
This item has been cleaned, maintained, and set up by our repair department.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial number: SZ7077137
Year of manufacture: 2007
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.53kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Includes: genuine hard case, arm, 2 springs, and manual.
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.
There are scratches on the tip of the head, metal parts are dull and rusty, pick guard is dirty, sticker marks, and the back plate is distorted. Also, there are many dents and scratches on the entire body. The switch knob has been replaced.
This item has been cleaned, maintained, and set up by our repair department.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial number: SZ7077137
Year of manufacture: 2007
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.53kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
