🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore
[SN 17 247308] USED Paul Reed Smith (PRS) / 2017 Hollowbody II Piezo 10Top McCarty Sunburst Pattern Neck [03]
[SN 17 247308] USED Paul Reed Smith (PRS) / 2017 Hollowbody II Piezo 10Top McCarty Sunburst Pattern Neck [03]
A used 2017 Hollowbody II Piezo 10Top is in stock!
Body, neck, and fingerboard.
The body is a royal combination of flame maple top and back, mahogany sides and neck. Indian rosewood fingerboard.
Neck Shape
Pattern" neck shape is used for McCarty and other guitars, which is more rounded than Pattern Regular and has a slightly grippy feel.
Pickups
58/15LT pickups are used. LT" stands for Low Turns, aiming to produce a clear and warm tone by reducing the number of coil turns (windings).
The Hollowbody II Piezo comes standard with the PRS/LR Baggs piezo system, allowing you to play acoustic and electric guitar tones with a single instrument. Two output jacks allow the electric and acoustic tones to be output from separate amps or sent to the PA via a DI. A separate blend control can also be used to blend the sound from the 58/15 LT pickup with an acoustic sound and send it out one output.
Condition
There is a ding on the tip of the head and other parts are dull.
The neck, frets, truss rod, and all other playing parts are in good condition.
The neck, frets, truss rod, and other parts of the instrument are in good condition.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 17 247308
Year of manufacture: 2017
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: tag, wrench, manual
Weight: 2.62kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 24.3mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Body, neck, and fingerboard.
The body is a royal combination of flame maple top and back, mahogany sides and neck. Indian rosewood fingerboard.
Neck Shape
Pattern" neck shape is used for McCarty and other guitars, which is more rounded than Pattern Regular and has a slightly grippy feel.
Pickups
58/15LT pickups are used. LT" stands for Low Turns, aiming to produce a clear and warm tone by reducing the number of coil turns (windings).
The Hollowbody II Piezo comes standard with the PRS/LR Baggs piezo system, allowing you to play acoustic and electric guitar tones with a single instrument. Two output jacks allow the electric and acoustic tones to be output from separate amps or sent to the PA via a DI. A separate blend control can also be used to blend the sound from the 58/15 LT pickup with an acoustic sound and send it out one output.
Condition
There is a ding on the tip of the head and other parts are dull.
The neck, frets, truss rod, and all other playing parts are in good condition.
The neck, frets, truss rod, and other parts of the instrument are in good condition.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 17 247308
Year of manufacture: 2017
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: tag, wrench, manual
Weight: 2.62kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 24.3mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$10.82
Original: $30.92
-65%[SN 17 247308] USED Paul Reed Smith (PRS) / 2017 Hollowbody II Piezo 10Top McCarty Sunburst Pattern Neck [03]—
$30.92
$10.82
Description
A used 2017 Hollowbody II Piezo 10Top is in stock!
Body, neck, and fingerboard.
The body is a royal combination of flame maple top and back, mahogany sides and neck. Indian rosewood fingerboard.
Neck Shape
Pattern" neck shape is used for McCarty and other guitars, which is more rounded than Pattern Regular and has a slightly grippy feel.
Pickups
58/15LT pickups are used. LT" stands for Low Turns, aiming to produce a clear and warm tone by reducing the number of coil turns (windings).
The Hollowbody II Piezo comes standard with the PRS/LR Baggs piezo system, allowing you to play acoustic and electric guitar tones with a single instrument. Two output jacks allow the electric and acoustic tones to be output from separate amps or sent to the PA via a DI. A separate blend control can also be used to blend the sound from the 58/15 LT pickup with an acoustic sound and send it out one output.
Condition
There is a ding on the tip of the head and other parts are dull.
The neck, frets, truss rod, and all other playing parts are in good condition.
The neck, frets, truss rod, and other parts of the instrument are in good condition.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 17 247308
Year of manufacture: 2017
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: tag, wrench, manual
Weight: 2.62kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 24.3mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Body, neck, and fingerboard.
The body is a royal combination of flame maple top and back, mahogany sides and neck. Indian rosewood fingerboard.
Neck Shape
Pattern" neck shape is used for McCarty and other guitars, which is more rounded than Pattern Regular and has a slightly grippy feel.
Pickups
58/15LT pickups are used. LT" stands for Low Turns, aiming to produce a clear and warm tone by reducing the number of coil turns (windings).
The Hollowbody II Piezo comes standard with the PRS/LR Baggs piezo system, allowing you to play acoustic and electric guitar tones with a single instrument. Two output jacks allow the electric and acoustic tones to be output from separate amps or sent to the PA via a DI. A separate blend control can also be used to blend the sound from the 58/15 LT pickup with an acoustic sound and send it out one output.
Condition
There is a ding on the tip of the head and other parts are dull.
The neck, frets, truss rod, and all other playing parts are in good condition.
The neck, frets, truss rod, and other parts of the instrument are in good condition.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial number: 17 247308
Year of manufacture: 2017
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: tag, wrench, manual
Weight: 2.62kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 24.3mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
