🎉 Up to 70% Off Selected ItemsShop Sale
USED Art Tech / ST TYPE [03]
Art Tech / ST TYPE has arrived as a used item.
Based on the numbers on the headstock, it appears to have been made in 1985.
The pickups are made by Fender Custom Shop; given the black bobbins and enamel-coated wire, they are likely Texas Specials.
It is equipped with CTS pots.
The pickguard, frets, nut, and many other parts appear to have been replaced.
We have performed a fret leveling adjustment, so the playing condition is excellent and the guitar is fully playable.
The headstock shows signs of use, including stickers, scratches, dents, and burn marks. Although it shows signs of use, after we received this item, we replaced the strings with new ones and had our repair department clean, maintain, and set up all parts.
* Please note that due to the nature of the product, we are unable to transfer it between stores.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: Japan
Case: Hard Case
Accessories: Tremolo arm
Weight: 3.31 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.9 mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, sticker removal
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Based on the numbers on the headstock, it appears to have been made in 1985.
The pickups are made by Fender Custom Shop; given the black bobbins and enamel-coated wire, they are likely Texas Specials.
It is equipped with CTS pots.
The pickguard, frets, nut, and many other parts appear to have been replaced.
We have performed a fret leveling adjustment, so the playing condition is excellent and the guitar is fully playable.
The headstock shows signs of use, including stickers, scratches, dents, and burn marks. Although it shows signs of use, after we received this item, we replaced the strings with new ones and had our repair department clean, maintain, and set up all parts.
* Please note that due to the nature of the product, we are unable to transfer it between stores.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: Japan
Case: Hard Case
Accessories: Tremolo arm
Weight: 3.31 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.9 mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, sticker removal
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$3.93
Original: $11.24
-65%USED Art Tech / ST TYPE [03]—
$11.24
$3.93
Description
Art Tech / ST TYPE has arrived as a used item.
Based on the numbers on the headstock, it appears to have been made in 1985.
The pickups are made by Fender Custom Shop; given the black bobbins and enamel-coated wire, they are likely Texas Specials.
It is equipped with CTS pots.
The pickguard, frets, nut, and many other parts appear to have been replaced.
We have performed a fret leveling adjustment, so the playing condition is excellent and the guitar is fully playable.
The headstock shows signs of use, including stickers, scratches, dents, and burn marks. Although it shows signs of use, after we received this item, we replaced the strings with new ones and had our repair department clean, maintain, and set up all parts.
* Please note that due to the nature of the product, we are unable to transfer it between stores.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: Japan
Case: Hard Case
Accessories: Tremolo arm
Weight: 3.31 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.9 mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, sticker removal
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Based on the numbers on the headstock, it appears to have been made in 1985.
The pickups are made by Fender Custom Shop; given the black bobbins and enamel-coated wire, they are likely Texas Specials.
It is equipped with CTS pots.
The pickguard, frets, nut, and many other parts appear to have been replaced.
We have performed a fret leveling adjustment, so the playing condition is excellent and the guitar is fully playable.
The headstock shows signs of use, including stickers, scratches, dents, and burn marks. Although it shows signs of use, after we received this item, we replaced the strings with new ones and had our repair department clean, maintain, and set up all parts.
* Please note that due to the nature of the product, we are unable to transfer it between stores.
Condition Grade: B+: Some scratches, but no issues for normal use
Country of Manufacture: Japan
Case: Hard Case
Accessories: Tremolo arm
Weight: 3.31 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.9 mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, sticker removal
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
