🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

[SN S823640] USED FENDER USA / 1978 Mustang 3-Tone Sunburst [03]

[SN S823640] USED FENDER USA / 1978 Mustang 3-Tone Sunburst [03]

We’ve just received a stylish, semi-vintage Mustang from 1978!

The entire body shows signs of age, and the fading has given it an almost two-tone sunburst appearance.
The fingerboard also has some areas where the finish has peeled away, revealing the wood beneath, giving this guitar a sense of character that comes from years of playing.
As far as we can tell, everything except the tone pot is fully original.
Of course, it delivers the signature phased-out sound, and the crisp tone derived from its short scale perfectly captures the iconic Mustang image.
Please consider this opportunity!

Pot
Vol.1377826
Tone: Unreadable (likely replaced)
PU
Neck: 175178
Bridge: 164878

Pickguard: S823640

The neck date is almost completely faded and unreadable.
The red finish has almost completely faded.
Comes with the original hard case and tremolo arm.

Condition: B: Shows significant wear and signs of use, but is in good working order for normal use

Serial Number: S823640
Year of Manufacture: 1978
Case: Hard case
Accessories: Original case, tremolo arm
Weight: 4.13 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slightly low)
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
Nut width: 40.2 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Tone Pot
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, nut slot correction
Pot Date: Vol. 1377826 Tone: Unreadable (likely replaced)
PU Date: Neck: 175178 Bridge: 164878

* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These figures are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$4.06

Original: $11.61

-65%
[SN S823640] USED FENDER USA / 1978 Mustang 3-Tone Sunburst [03]

$11.61

$4.06
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
Product image 10
Product image 11
Product image 12
Product image 13
Product image 14
Product image 15

Description

We’ve just received a stylish, semi-vintage Mustang from 1978!

The entire body shows signs of age, and the fading has given it an almost two-tone sunburst appearance.
The fingerboard also has some areas where the finish has peeled away, revealing the wood beneath, giving this guitar a sense of character that comes from years of playing.
As far as we can tell, everything except the tone pot is fully original.
Of course, it delivers the signature phased-out sound, and the crisp tone derived from its short scale perfectly captures the iconic Mustang image.
Please consider this opportunity!

Pot
Vol.1377826
Tone: Unreadable (likely replaced)
PU
Neck: 175178
Bridge: 164878

Pickguard: S823640

The neck date is almost completely faded and unreadable.
The red finish has almost completely faded.
Comes with the original hard case and tremolo arm.

Condition: B: Shows significant wear and signs of use, but is in good working order for normal use

Serial Number: S823640
Year of Manufacture: 1978
Case: Hard case
Accessories: Original case, tremolo arm
Weight: 4.13 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slightly low)
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
Nut width: 40.2 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Tone Pot
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, nut slot correction
Pot Date: Vol. 1377826 Tone: Unreadable (likely replaced)
PU Date: Neck: 175178 Bridge: 164878

* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These figures are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.