🎉 Up to 70% Off Selected ItemsShop Sale
[SN S769521] USED FENDER USA / STRATOCASTER Maple Fingerboard Olympic White 1977 [03]
We’ve just received a vintage Stratocaster from 1977.
Most of the wear-and-tear parts, such as the frets and nut, have been replaced.
The finish on the maple fingerboard has also been refinished.
The electronics have been kept original.
The case appears to be original, but its authenticity is unknown. Based on its age, it is believed to be from at least a similar era.
Perhaps modified with Blackmore in mind, the tremolo arm socket has been enlarged, and an extra-thick tremolo arm is included.
Pegs replaced, refretted, nut replaced, fingerboard refinished; pot serial number is 1977, center tone only 1976; pickup stamps are indecipherable except for the rear pickup; as it is solder-virgin, it is believed to be from 1976. Plastic parts such as the pickguard and pickup covers have been replaced; the bridge tremolo arm hole has been enlarged, and a thicker tremolo arm has been installed.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: S769521
Year of Manufacture: 1977
Country of Manufacture: USA
Case: Hard Case
Accessories: Case from the same era, tonearm (aftermarket), parts (includes original pegs and nut, but they are damaged and cannot be reused)
Weight: 3.58 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
Nut width: 41.8 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Tuners, frets, nut, fingerboard finish, tremolo arm and socket, plastic parts such as the pickguard and pickup covers, etc.
Repairs and maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Most of the wear-and-tear parts, such as the frets and nut, have been replaced.
The finish on the maple fingerboard has also been refinished.
The electronics have been kept original.
The case appears to be original, but its authenticity is unknown. Based on its age, it is believed to be from at least a similar era.
Perhaps modified with Blackmore in mind, the tremolo arm socket has been enlarged, and an extra-thick tremolo arm is included.
Pegs replaced, refretted, nut replaced, fingerboard refinished; pot serial number is 1977, center tone only 1976; pickup stamps are indecipherable except for the rear pickup; as it is solder-virgin, it is believed to be from 1976. Plastic parts such as the pickguard and pickup covers have been replaced; the bridge tremolo arm hole has been enlarged, and a thicker tremolo arm has been installed.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: S769521
Year of Manufacture: 1977
Country of Manufacture: USA
Case: Hard Case
Accessories: Case from the same era, tonearm (aftermarket), parts (includes original pegs and nut, but they are damaged and cannot be reused)
Weight: 3.58 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
Nut width: 41.8 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Tuners, frets, nut, fingerboard finish, tremolo arm and socket, plastic parts such as the pickguard and pickup covers, etc.
Repairs and maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$6.12
Original: $17.48
-65%[SN S769521] USED FENDER USA / STRATOCASTER Maple Fingerboard Olympic White 1977 [03]—
$17.48
$6.12Description
We’ve just received a vintage Stratocaster from 1977.
Most of the wear-and-tear parts, such as the frets and nut, have been replaced.
The finish on the maple fingerboard has also been refinished.
The electronics have been kept original.
The case appears to be original, but its authenticity is unknown. Based on its age, it is believed to be from at least a similar era.
Perhaps modified with Blackmore in mind, the tremolo arm socket has been enlarged, and an extra-thick tremolo arm is included.
Pegs replaced, refretted, nut replaced, fingerboard refinished; pot serial number is 1977, center tone only 1976; pickup stamps are indecipherable except for the rear pickup; as it is solder-virgin, it is believed to be from 1976. Plastic parts such as the pickguard and pickup covers have been replaced; the bridge tremolo arm hole has been enlarged, and a thicker tremolo arm has been installed.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: S769521
Year of Manufacture: 1977
Country of Manufacture: USA
Case: Hard Case
Accessories: Case from the same era, tonearm (aftermarket), parts (includes original pegs and nut, but they are damaged and cannot be reused)
Weight: 3.58 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
Nut width: 41.8 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Tuners, frets, nut, fingerboard finish, tremolo arm and socket, plastic parts such as the pickguard and pickup covers, etc.
Repairs and maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Most of the wear-and-tear parts, such as the frets and nut, have been replaced.
The finish on the maple fingerboard has also been refinished.
The electronics have been kept original.
The case appears to be original, but its authenticity is unknown. Based on its age, it is believed to be from at least a similar era.
Perhaps modified with Blackmore in mind, the tremolo arm socket has been enlarged, and an extra-thick tremolo arm is included.
Pegs replaced, refretted, nut replaced, fingerboard refinished; pot serial number is 1977, center tone only 1976; pickup stamps are indecipherable except for the rear pickup; as it is solder-virgin, it is believed to be from 1976. Plastic parts such as the pickguard and pickup covers have been replaced; the bridge tremolo arm hole has been enlarged, and a thicker tremolo arm has been installed.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: S769521
Year of Manufacture: 1977
Country of Manufacture: USA
Case: Hard Case
Accessories: Case from the same era, tonearm (aftermarket), parts (includes original pegs and nut, but they are damaged and cannot be reused)
Weight: 3.58 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
Nut width: 41.8 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Tuners, frets, nut, fingerboard finish, tremolo arm and socket, plastic parts such as the pickguard and pickup covers, etc.
Repairs and maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
