🎉 Up to 70% Off Selected ItemsShop Sale
[SN 00188512] USED GIBSON / 1976–78 Marauder Mahogany Walnut [04]
1976–78 Gibson Marauder Mahogany Walnut
Body: Mahogany with a walnut finish
The neck is 3-piece maple with a rosewood fingerboard
Headstock: Flying V-style with volute design
Bolt-on neck.
Pickguard: Black
Both the front and rear pickups have been replaced, but the manufacturer is unknown.
Bridge: Wide Traveler
The specifications for this model differ between the 1976 and 1978 versions.
Here is a summary of the differences by model year.
1975–76: 3-way pickup selector; cutaway on the 1st string side
1976–78: Pickup balancer pot (located in the cutaway section on the G-string side)
1978–82: Pickup balancer pot between the Volume and Tone knobs
The specific model shown here falls under the 1978–82 category.
However, since the serial number on the back of the headstock starts with “00,” and there are no irregularities in the neck joint (suggesting it was made in 1976),
it is likely that the neck was completed in 1976
and the neck was likely assembled onto the body around 1978.
The neck is currently straight, and there is plenty of truss rod adjustment left.
The frets were originally set low, but about 40% of the material remains.
Although many parts, such as the pickups and strap pins, have been replaced, this is a model that has become increasingly rare in recent years.
As it is a vintage instrument, there are scratches and dents throughout.
S/N: 00188512
Weight: 4.15 kg
Accessories: Non-original hard case
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 00188512
Year of Manufacture: 1976-78
Accessories: Non-original hard case
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Body: Mahogany with a walnut finish
The neck is 3-piece maple with a rosewood fingerboard
Headstock: Flying V-style with volute design
Bolt-on neck.
Pickguard: Black
Both the front and rear pickups have been replaced, but the manufacturer is unknown.
Bridge: Wide Traveler
The specifications for this model differ between the 1976 and 1978 versions.
Here is a summary of the differences by model year.
1975–76: 3-way pickup selector; cutaway on the 1st string side
1976–78: Pickup balancer pot (located in the cutaway section on the G-string side)
1978–82: Pickup balancer pot between the Volume and Tone knobs
The specific model shown here falls under the 1978–82 category.
However, since the serial number on the back of the headstock starts with “00,” and there are no irregularities in the neck joint (suggesting it was made in 1976),
it is likely that the neck was completed in 1976
and the neck was likely assembled onto the body around 1978.
The neck is currently straight, and there is plenty of truss rod adjustment left.
The frets were originally set low, but about 40% of the material remains.
Although many parts, such as the pickups and strap pins, have been replaced, this is a model that has become increasingly rare in recent years.
As it is a vintage instrument, there are scratches and dents throughout.
S/N: 00188512
Weight: 4.15 kg
Accessories: Non-original hard case
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 00188512
Year of Manufacture: 1976-78
Accessories: Non-original hard case
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$12.32
[SN 00188512] USED GIBSON / 1976–78 Marauder Mahogany Walnut [04]—
$12.32
Description
1976–78 Gibson Marauder Mahogany Walnut
Body: Mahogany with a walnut finish
The neck is 3-piece maple with a rosewood fingerboard
Headstock: Flying V-style with volute design
Bolt-on neck.
Pickguard: Black
Both the front and rear pickups have been replaced, but the manufacturer is unknown.
Bridge: Wide Traveler
The specifications for this model differ between the 1976 and 1978 versions.
Here is a summary of the differences by model year.
1975–76: 3-way pickup selector; cutaway on the 1st string side
1976–78: Pickup balancer pot (located in the cutaway section on the G-string side)
1978–82: Pickup balancer pot between the Volume and Tone knobs
The specific model shown here falls under the 1978–82 category.
However, since the serial number on the back of the headstock starts with “00,” and there are no irregularities in the neck joint (suggesting it was made in 1976),
it is likely that the neck was completed in 1976
and the neck was likely assembled onto the body around 1978.
The neck is currently straight, and there is plenty of truss rod adjustment left.
The frets were originally set low, but about 40% of the material remains.
Although many parts, such as the pickups and strap pins, have been replaced, this is a model that has become increasingly rare in recent years.
As it is a vintage instrument, there are scratches and dents throughout.
S/N: 00188512
Weight: 4.15 kg
Accessories: Non-original hard case
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 00188512
Year of Manufacture: 1976-78
Accessories: Non-original hard case
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Body: Mahogany with a walnut finish
The neck is 3-piece maple with a rosewood fingerboard
Headstock: Flying V-style with volute design
Bolt-on neck.
Pickguard: Black
Both the front and rear pickups have been replaced, but the manufacturer is unknown.
Bridge: Wide Traveler
The specifications for this model differ between the 1976 and 1978 versions.
Here is a summary of the differences by model year.
1975–76: 3-way pickup selector; cutaway on the 1st string side
1976–78: Pickup balancer pot (located in the cutaway section on the G-string side)
1978–82: Pickup balancer pot between the Volume and Tone knobs
The specific model shown here falls under the 1978–82 category.
However, since the serial number on the back of the headstock starts with “00,” and there are no irregularities in the neck joint (suggesting it was made in 1976),
it is likely that the neck was completed in 1976
and the neck was likely assembled onto the body around 1978.
The neck is currently straight, and there is plenty of truss rod adjustment left.
The frets were originally set low, but about 40% of the material remains.
Although many parts, such as the pickups and strap pins, have been replaced, this is a model that has become increasingly rare in recent years.
As it is a vintage instrument, there are scratches and dents throughout.
S/N: 00188512
Weight: 4.15 kg
Accessories: Non-original hard case
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 00188512
Year of Manufacture: 1976-78
Accessories: Non-original hard case
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
