🎉 Up to 70% Off Selected ItemsShop Sale
[SN 177 of 500] USED FENDER USA / 35th Anniversary Stratocaster Modified 1990 [06]
This is a model with a new bridge and saddle, which was produced in a limited edition of 500 from 1989 to 1990 at the Fender Custom Shop to commemorate the 35th anniversary of the Stratocaster.
The bridge has been replaced with a 6-point stopper type, and the bridge saddle has been replaced with what appears to be a titanium bridge saddle. The original parts are not included.
Body is flame maple and alder, neck is bird's eye flame maple, fingerboard is ebony, Teflon nut, locking pegs, and three Race Sensor pickups.
The pickguard, control knob, pickup selector, jack plate, and strap pins have been replaced. Only the original strap pin (locking type) is included, but the other locking pin is missing.
The screw holes where the strap pins were added have been filled in at the end of the body, and some of the screws on the control panel on the back of the body have been replaced.
The head has some dents and paint peeling, the fingerboard has many scratches with dents, and there is a bump at the top of the skunk line on the back of the neck.
There are many scratches and dents on the body, paint is peeling on the sides of the body, and rust, tarnish, and pitting are visible on metal parts.
There are many scratches and dents on the body, paint is peeling on the side of the body, and rust, tarnish, and pits are visible on the metal parts.
The case that comes with the instrument has stains and sticker marks, and the metal clasp in the center has been replaced with a non-original one.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 177 of 500
Year of manufacture: 1990
Case: Hard Case
Weight: 3.83 kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.9mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, removal of gurgling, strap pin replacement, back panel fixing screws replaced x2
* There are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The bridge has been replaced with a 6-point stopper type, and the bridge saddle has been replaced with what appears to be a titanium bridge saddle. The original parts are not included.
Body is flame maple and alder, neck is bird's eye flame maple, fingerboard is ebony, Teflon nut, locking pegs, and three Race Sensor pickups.
The pickguard, control knob, pickup selector, jack plate, and strap pins have been replaced. Only the original strap pin (locking type) is included, but the other locking pin is missing.
The screw holes where the strap pins were added have been filled in at the end of the body, and some of the screws on the control panel on the back of the body have been replaced.
The head has some dents and paint peeling, the fingerboard has many scratches with dents, and there is a bump at the top of the skunk line on the back of the neck.
There are many scratches and dents on the body, paint is peeling on the sides of the body, and rust, tarnish, and pitting are visible on metal parts.
There are many scratches and dents on the body, paint is peeling on the side of the body, and rust, tarnish, and pits are visible on the metal parts.
The case that comes with the instrument has stains and sticker marks, and the metal clasp in the center has been replaced with a non-original one.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 177 of 500
Year of manufacture: 1990
Case: Hard Case
Weight: 3.83 kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.9mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, removal of gurgling, strap pin replacement, back panel fixing screws replaced x2
* There are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$3.48
Original: $9.95
-65%[SN 177 of 500] USED FENDER USA / 35th Anniversary Stratocaster Modified 1990 [06]—
$9.95
$3.48
Description
This is a model with a new bridge and saddle, which was produced in a limited edition of 500 from 1989 to 1990 at the Fender Custom Shop to commemorate the 35th anniversary of the Stratocaster.
The bridge has been replaced with a 6-point stopper type, and the bridge saddle has been replaced with what appears to be a titanium bridge saddle. The original parts are not included.
Body is flame maple and alder, neck is bird's eye flame maple, fingerboard is ebony, Teflon nut, locking pegs, and three Race Sensor pickups.
The pickguard, control knob, pickup selector, jack plate, and strap pins have been replaced. Only the original strap pin (locking type) is included, but the other locking pin is missing.
The screw holes where the strap pins were added have been filled in at the end of the body, and some of the screws on the control panel on the back of the body have been replaced.
The head has some dents and paint peeling, the fingerboard has many scratches with dents, and there is a bump at the top of the skunk line on the back of the neck.
There are many scratches and dents on the body, paint is peeling on the sides of the body, and rust, tarnish, and pitting are visible on metal parts.
There are many scratches and dents on the body, paint is peeling on the side of the body, and rust, tarnish, and pits are visible on the metal parts.
The case that comes with the instrument has stains and sticker marks, and the metal clasp in the center has been replaced with a non-original one.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 177 of 500
Year of manufacture: 1990
Case: Hard Case
Weight: 3.83 kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.9mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, removal of gurgling, strap pin replacement, back panel fixing screws replaced x2
* There are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The bridge has been replaced with a 6-point stopper type, and the bridge saddle has been replaced with what appears to be a titanium bridge saddle. The original parts are not included.
Body is flame maple and alder, neck is bird's eye flame maple, fingerboard is ebony, Teflon nut, locking pegs, and three Race Sensor pickups.
The pickguard, control knob, pickup selector, jack plate, and strap pins have been replaced. Only the original strap pin (locking type) is included, but the other locking pin is missing.
The screw holes where the strap pins were added have been filled in at the end of the body, and some of the screws on the control panel on the back of the body have been replaced.
The head has some dents and paint peeling, the fingerboard has many scratches with dents, and there is a bump at the top of the skunk line on the back of the neck.
There are many scratches and dents on the body, paint is peeling on the sides of the body, and rust, tarnish, and pitting are visible on metal parts.
There are many scratches and dents on the body, paint is peeling on the side of the body, and rust, tarnish, and pits are visible on the metal parts.
The case that comes with the instrument has stains and sticker marks, and the metal clasp in the center has been replaced with a non-original one.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 177 of 500
Year of manufacture: 1990
Case: Hard Case
Weight: 3.83 kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.9mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, removal of gurgling, strap pin replacement, back panel fixing screws replaced x2
* There are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
