🎉 Up to 70% Off Selected ItemsShop Sale
[SN MIJ A005789] USED FENDER JAPAN / ST72-55 A Serial 3TS [06]
FENDER JAPAN ST72-55 A Serial 3TS used is in stock now!
Manufactured by Fujigen from 1985 to 1986.
Maple neck and Rose fretboard.
Equipped with 3 Japanese single coil pickups.
Back panel is missing.
There are scratches, dents, and dull metal parts, and it has a slightly used feel.
The instrument has been cleaned and adjusted after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: MIJ A005789
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.78kg
Truss Rod: No problem (only a little left), with a note that the rod has been checked up to 60 degrees left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 21.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Manufactured by Fujigen from 1985 to 1986.
Maple neck and Rose fretboard.
Equipped with 3 Japanese single coil pickups.
Back panel is missing.
There are scratches, dents, and dull metal parts, and it has a slightly used feel.
The instrument has been cleaned and adjusted after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: MIJ A005789
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.78kg
Truss Rod: No problem (only a little left), with a note that the rod has been checked up to 60 degrees left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 21.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$4.95
[SN MIJ A005789] USED FENDER JAPAN / ST72-55 A Serial 3TS [06]—
$4.95
Description
FENDER JAPAN ST72-55 A Serial 3TS used is in stock now!
Manufactured by Fujigen from 1985 to 1986.
Maple neck and Rose fretboard.
Equipped with 3 Japanese single coil pickups.
Back panel is missing.
There are scratches, dents, and dull metal parts, and it has a slightly used feel.
The instrument has been cleaned and adjusted after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: MIJ A005789
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.78kg
Truss Rod: No problem (only a little left), with a note that the rod has been checked up to 60 degrees left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 21.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Manufactured by Fujigen from 1985 to 1986.
Maple neck and Rose fretboard.
Equipped with 3 Japanese single coil pickups.
Back panel is missing.
There are scratches, dents, and dull metal parts, and it has a slightly used feel.
The instrument has been cleaned and adjusted after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: MIJ A005789
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.78kg
Truss Rod: No problem (only a little left), with a note that the rod has been checked up to 60 degrees left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 21.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
