🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore
[SN R141781] USED FENDER CUSTOM SHOP / VINTAGE CUSTOM 1959 Stratocaster Candy Apple Red [06]
[SN R141781] USED FENDER CUSTOM SHOP / VINTAGE CUSTOM 1959 Stratocaster Candy Apple Red [06]
We have received a 2024 Fender Custom Shop VINTAGE CUSTOM 1959 Stratocaster.
It features a two-piece alder body, a 1959 Esquire "C" profile maple neck with a straight-grained finish, and a slab rosewood fingerboard with a 7.25" to 9.50" compound radius.
Featuring a flash-coat lacquer finish without buffing, hardware with a Closet Classic finish, and Custom Shop hand-wound '59 Strat pickups, this is a modern vintage Stratocaster model from the Custom Shop that epitomizes the fusion of playability and attention to detail.
It is in pristine condition with no damage other than the original finish.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: R141781
Year of Manufacture: 2024
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm, bridge cover, certificate of authenticity, instruction manual
Weight: 3.51 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")–241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features a two-piece alder body, a 1959 Esquire "C" profile maple neck with a straight-grained finish, and a slab rosewood fingerboard with a 7.25" to 9.50" compound radius.
Featuring a flash-coat lacquer finish without buffing, hardware with a Closet Classic finish, and Custom Shop hand-wound '59 Strat pickups, this is a modern vintage Stratocaster model from the Custom Shop that epitomizes the fusion of playability and attention to detail.
It is in pristine condition with no damage other than the original finish.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: R141781
Year of Manufacture: 2024
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm, bridge cover, certificate of authenticity, instruction manual
Weight: 3.51 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")–241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$7.19
Original: $20.54
-65%[SN R141781] USED FENDER CUSTOM SHOP / VINTAGE CUSTOM 1959 Stratocaster Candy Apple Red [06]—
$20.54
$7.19
Description
We have received a 2024 Fender Custom Shop VINTAGE CUSTOM 1959 Stratocaster.
It features a two-piece alder body, a 1959 Esquire "C" profile maple neck with a straight-grained finish, and a slab rosewood fingerboard with a 7.25" to 9.50" compound radius.
Featuring a flash-coat lacquer finish without buffing, hardware with a Closet Classic finish, and Custom Shop hand-wound '59 Strat pickups, this is a modern vintage Stratocaster model from the Custom Shop that epitomizes the fusion of playability and attention to detail.
It is in pristine condition with no damage other than the original finish.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: R141781
Year of Manufacture: 2024
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm, bridge cover, certificate of authenticity, instruction manual
Weight: 3.51 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")–241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features a two-piece alder body, a 1959 Esquire "C" profile maple neck with a straight-grained finish, and a slab rosewood fingerboard with a 7.25" to 9.50" compound radius.
Featuring a flash-coat lacquer finish without buffing, hardware with a Closet Classic finish, and Custom Shop hand-wound '59 Strat pickups, this is a modern vintage Stratocaster model from the Custom Shop that epitomizes the fusion of playability and attention to detail.
It is in pristine condition with no damage other than the original finish.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: R141781
Year of Manufacture: 2024
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm, bridge cover, certificate of authenticity, instruction manual
Weight: 3.51 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")–241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
