🎉 Up to 70% Off Selected ItemsShop Sale
[SN 2093] USED MOMOSE / MC1-STD/NJ 3TS [06]
We have received a used MOMOSE MC1-STD/NJ.
Pickups have been replaced. They are Bare Knuckle pickups, but the model names and other details are unknown.
The capacitor has been replaced with a NUE DEVICE NERO.
The pots, nut, and joint plate have been replaced.
The back panel is missing.
The frets have been leveled, so the playing condition is fine and the guitar is fully playable.
There are dents on the headstock tip and neck, as well as a large dent and numerous deep scratches on the back of the body. There is also a hole where an aftermarket mini-switch was removed. Additionally, there are some paint cracks around the joint.
After this item arrived at our store, we restrung it with new strings and our repair department performed cleaning, maintenance, and setup on all parts.
Condition Grade: B+: Some scratches present, but no issues for normal use
Serial Number: 2093
Country of Manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.29 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Nut replaced with BLACK TUSQ, pickups replaced with Hybrid Guitars pickups, capacitor replaced with Ovaltone NUE DEVICE NERO, neck plate replaced with Freedom Tone Shift Plate
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, wiring repair
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Pickups have been replaced. They are Bare Knuckle pickups, but the model names and other details are unknown.
The capacitor has been replaced with a NUE DEVICE NERO.
The pots, nut, and joint plate have been replaced.
The back panel is missing.
The frets have been leveled, so the playing condition is fine and the guitar is fully playable.
There are dents on the headstock tip and neck, as well as a large dent and numerous deep scratches on the back of the body. There is also a hole where an aftermarket mini-switch was removed. Additionally, there are some paint cracks around the joint.
After this item arrived at our store, we restrung it with new strings and our repair department performed cleaning, maintenance, and setup on all parts.
Condition Grade: B+: Some scratches present, but no issues for normal use
Serial Number: 2093
Country of Manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.29 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Nut replaced with BLACK TUSQ, pickups replaced with Hybrid Guitars pickups, capacitor replaced with Ovaltone NUE DEVICE NERO, neck plate replaced with Freedom Tone Shift Plate
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, wiring repair
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$2.18
Original: $6.22
-65%[SN 2093] USED MOMOSE / MC1-STD/NJ 3TS [06]—
$6.22
$2.18
Description
We have received a used MOMOSE MC1-STD/NJ.
Pickups have been replaced. They are Bare Knuckle pickups, but the model names and other details are unknown.
The capacitor has been replaced with a NUE DEVICE NERO.
The pots, nut, and joint plate have been replaced.
The back panel is missing.
The frets have been leveled, so the playing condition is fine and the guitar is fully playable.
There are dents on the headstock tip and neck, as well as a large dent and numerous deep scratches on the back of the body. There is also a hole where an aftermarket mini-switch was removed. Additionally, there are some paint cracks around the joint.
After this item arrived at our store, we restrung it with new strings and our repair department performed cleaning, maintenance, and setup on all parts.
Condition Grade: B+: Some scratches present, but no issues for normal use
Serial Number: 2093
Country of Manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.29 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Nut replaced with BLACK TUSQ, pickups replaced with Hybrid Guitars pickups, capacitor replaced with Ovaltone NUE DEVICE NERO, neck plate replaced with Freedom Tone Shift Plate
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, wiring repair
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Pickups have been replaced. They are Bare Knuckle pickups, but the model names and other details are unknown.
The capacitor has been replaced with a NUE DEVICE NERO.
The pots, nut, and joint plate have been replaced.
The back panel is missing.
The frets have been leveled, so the playing condition is fine and the guitar is fully playable.
There are dents on the headstock tip and neck, as well as a large dent and numerous deep scratches on the back of the body. There is also a hole where an aftermarket mini-switch was removed. Additionally, there are some paint cracks around the joint.
After this item arrived at our store, we restrung it with new strings and our repair department performed cleaning, maintenance, and setup on all parts.
Condition Grade: B+: Some scratches present, but no issues for normal use
Serial Number: 2093
Country of Manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.29 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; sufficient fret height
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0mm
Scale: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Nut replaced with BLACK TUSQ, pickups replaced with Hybrid Guitars pickups, capacitor replaced with Ovaltone NUE DEVICE NERO, neck plate replaced with Freedom Tone Shift Plate
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, wiring repair
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
