🎉 Up to 70% Off Selected ItemsShop Sale
[SN V057703] USED FENDER USA / American Vintage '57 Stratocaster 2-Tone Sunburst [06]
Used Fender USA American Vintage '57 Stratocaster now in stock!
Based on the pot date and neck date, it was manufactured in 1992.
A model recreating the 1957-spec Stratocaster.
Features an alder body with a maple neck and fingerboard.
Equipped with three vintage-spec original pickups.
The back panel is included, but the screws are missing (with markings written on them).
The rear pickup cover has been replaced (original cover included).
The fingerboard has been sanded, and the finish has lost its gloss. There are impact marks and small paint chips on the body top, a slightly noticeable paint chip on the 1st string side horn and body back, and a cigarette burn mark on the 6th string side of the headstock. The bridge mounting screw has penetrated the cavity, causing a paint chip.
Other minor scratches, dents, and tarnish on metal parts are present, but it remains a perfectly playable instrument.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but no issues for normal use.
Serial Number: V057703
Year of Manufacture: 1992
Country of Manufacture: USA
Case: Hard case
Accessories: Tonearm, bridge cover, back panel (with text inscription)
Weight: 3.58kg
Truss Rod: Note: Checked to 60 degrees both ways, no issues (some adjustment remaining)
Fret Wear: No issues; sufficient fret height remains
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.8mm
Neck Thickness Near 1st Fret: 20.6mm
Neck Thickness at 12th Fret: 21.8mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Fret Leveling, Parts Replacement (Rear Pickup Cover)
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining fret depth, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items, but this is not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
Based on the pot date and neck date, it was manufactured in 1992.
A model recreating the 1957-spec Stratocaster.
Features an alder body with a maple neck and fingerboard.
Equipped with three vintage-spec original pickups.
The back panel is included, but the screws are missing (with markings written on them).
The rear pickup cover has been replaced (original cover included).
The fingerboard has been sanded, and the finish has lost its gloss. There are impact marks and small paint chips on the body top, a slightly noticeable paint chip on the 1st string side horn and body back, and a cigarette burn mark on the 6th string side of the headstock. The bridge mounting screw has penetrated the cavity, causing a paint chip.
Other minor scratches, dents, and tarnish on metal parts are present, but it remains a perfectly playable instrument.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but no issues for normal use.
Serial Number: V057703
Year of Manufacture: 1992
Country of Manufacture: USA
Case: Hard case
Accessories: Tonearm, bridge cover, back panel (with text inscription)
Weight: 3.58kg
Truss Rod: Note: Checked to 60 degrees both ways, no issues (some adjustment remaining)
Fret Wear: No issues; sufficient fret height remains
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.8mm
Neck Thickness Near 1st Fret: 20.6mm
Neck Thickness at 12th Fret: 21.8mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Fret Leveling, Parts Replacement (Rear Pickup Cover)
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining fret depth, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items, but this is not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
$3.27
Original: $9.33
-65%[SN V057703] USED FENDER USA / American Vintage '57 Stratocaster 2-Tone Sunburst [06]—
$9.33
$3.27
Description
Used Fender USA American Vintage '57 Stratocaster now in stock!
Based on the pot date and neck date, it was manufactured in 1992.
A model recreating the 1957-spec Stratocaster.
Features an alder body with a maple neck and fingerboard.
Equipped with three vintage-spec original pickups.
The back panel is included, but the screws are missing (with markings written on them).
The rear pickup cover has been replaced (original cover included).
The fingerboard has been sanded, and the finish has lost its gloss. There are impact marks and small paint chips on the body top, a slightly noticeable paint chip on the 1st string side horn and body back, and a cigarette burn mark on the 6th string side of the headstock. The bridge mounting screw has penetrated the cavity, causing a paint chip.
Other minor scratches, dents, and tarnish on metal parts are present, but it remains a perfectly playable instrument.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but no issues for normal use.
Serial Number: V057703
Year of Manufacture: 1992
Country of Manufacture: USA
Case: Hard case
Accessories: Tonearm, bridge cover, back panel (with text inscription)
Weight: 3.58kg
Truss Rod: Note: Checked to 60 degrees both ways, no issues (some adjustment remaining)
Fret Wear: No issues; sufficient fret height remains
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.8mm
Neck Thickness Near 1st Fret: 20.6mm
Neck Thickness at 12th Fret: 21.8mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Fret Leveling, Parts Replacement (Rear Pickup Cover)
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining fret depth, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items, but this is not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
Based on the pot date and neck date, it was manufactured in 1992.
A model recreating the 1957-spec Stratocaster.
Features an alder body with a maple neck and fingerboard.
Equipped with three vintage-spec original pickups.
The back panel is included, but the screws are missing (with markings written on them).
The rear pickup cover has been replaced (original cover included).
The fingerboard has been sanded, and the finish has lost its gloss. There are impact marks and small paint chips on the body top, a slightly noticeable paint chip on the 1st string side horn and body back, and a cigarette burn mark on the 6th string side of the headstock. The bridge mounting screw has penetrated the cavity, causing a paint chip.
Other minor scratches, dents, and tarnish on metal parts are present, but it remains a perfectly playable instrument.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but no issues for normal use.
Serial Number: V057703
Year of Manufacture: 1992
Country of Manufacture: USA
Case: Hard case
Accessories: Tonearm, bridge cover, back panel (with text inscription)
Weight: 3.58kg
Truss Rod: Note: Checked to 60 degrees both ways, no issues (some adjustment remaining)
Fret Wear: No issues; sufficient fret height remains
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.8mm
Neck Thickness Near 1st Fret: 20.6mm
Neck Thickness at 12th Fret: 21.8mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Fret Leveling, Parts Replacement (Rear Pickup Cover)
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining fret depth, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items, but this is not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
