🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore
[SN JD15009658] USED FENDER MADE IN JAPAN / Classic '68 Stratocaster Texas Special Black [06]
[SN JD15009658] USED FENDER MADE IN JAPAN / Classic '68 Stratocaster Texas Special Black [06]
FENDER MADE IN JAPAN Classic 68 Stratocaster Texas Special Black used model now in stock!
Made in Japan, 2015.
A model recreating the '68 style, featuring a large headstock and Schaller tuners with "F" engraving.
Features an alder body with a maple neck and fingerboard.
Equipped with three Custom Shop Texas Special Single-Coil Strat pickups.
Body top has impact marks and scratches; body back has linear scratches.
Other minor scuffs, dents, and tarnish on metal parts indicate slightly heavier use.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but does not affect normal use.
Serial Number: JD15009658
Year of Manufacture: 2015
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.53kg
Truss Rod: No issues. Rod movement confirmed up to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 40.0mm
Neck Thickness Near 1st Fret: 21.2mm
Neck Thickness at 12th Fret: 23.4mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Binding
* As this is a used item, please note that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee the same measurements upon arrival.
* This item is a single, unique piece currently listed simultaneously on multiple marketplaces, including in-store displays. While we strive to promptly remove sold items from listings, this is not always done in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
Made in Japan, 2015.
A model recreating the '68 style, featuring a large headstock and Schaller tuners with "F" engraving.
Features an alder body with a maple neck and fingerboard.
Equipped with three Custom Shop Texas Special Single-Coil Strat pickups.
Body top has impact marks and scratches; body back has linear scratches.
Other minor scuffs, dents, and tarnish on metal parts indicate slightly heavier use.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but does not affect normal use.
Serial Number: JD15009658
Year of Manufacture: 2015
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.53kg
Truss Rod: No issues. Rod movement confirmed up to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 40.0mm
Neck Thickness Near 1st Fret: 21.2mm
Neck Thickness at 12th Fret: 23.4mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Binding
* As this is a used item, please note that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee the same measurements upon arrival.
* This item is a single, unique piece currently listed simultaneously on multiple marketplaces, including in-store displays. While we strive to promptly remove sold items from listings, this is not always done in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
$4.19
[SN JD15009658] USED FENDER MADE IN JAPAN / Classic '68 Stratocaster Texas Special Black [06]—
$4.19
Description
FENDER MADE IN JAPAN Classic 68 Stratocaster Texas Special Black used model now in stock!
Made in Japan, 2015.
A model recreating the '68 style, featuring a large headstock and Schaller tuners with "F" engraving.
Features an alder body with a maple neck and fingerboard.
Equipped with three Custom Shop Texas Special Single-Coil Strat pickups.
Body top has impact marks and scratches; body back has linear scratches.
Other minor scuffs, dents, and tarnish on metal parts indicate slightly heavier use.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but does not affect normal use.
Serial Number: JD15009658
Year of Manufacture: 2015
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.53kg
Truss Rod: No issues. Rod movement confirmed up to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 40.0mm
Neck Thickness Near 1st Fret: 21.2mm
Neck Thickness at 12th Fret: 23.4mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Binding
* As this is a used item, please note that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee the same measurements upon arrival.
* This item is a single, unique piece currently listed simultaneously on multiple marketplaces, including in-store displays. While we strive to promptly remove sold items from listings, this is not always done in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
Made in Japan, 2015.
A model recreating the '68 style, featuring a large headstock and Schaller tuners with "F" engraving.
Features an alder body with a maple neck and fingerboard.
Equipped with three Custom Shop Texas Special Single-Coil Strat pickups.
Body top has impact marks and scratches; body back has linear scratches.
Other minor scuffs, dents, and tarnish on metal parts indicate slightly heavier use.
Cleaned and fully adjusted after arrival; plays perfectly fine.
Condition Grade: B+: Some minor imperfections present, but does not affect normal use.
Serial Number: JD15009658
Year of Manufacture: 2015
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.53kg
Truss Rod: No issues. Rod movement confirmed up to 60 degrees left and right with no problems.
Fret Wear: No issues. Sufficient fret height present
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 40.0mm
Neck Thickness Near 1st Fret: 21.2mm
Neck Thickness at 12th Fret: 23.4mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment, Binding
* As this is a used item, please note that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.
* Any measurements listed for the truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee the same measurements upon arrival.
* This item is a single, unique piece currently listed simultaneously on multiple marketplaces, including in-store displays. While we strive to promptly remove sold items from listings, this is not always done in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
