🎉 Up to 70% Off Selected ItemsShop Sale
[SN 94032672] USED GIBSON / Les Paul Custom 1994 Ebony [06]
A 1994 Les Paul Custom has arrived in stock!
It features a maple top and mahogany back, with a mahogany neck and ebony fingerboard. True to its Custom model heritage, this is a substantial instrument that delivers punchy, tight low-end tones.
Both pickups have been replaced: the front is a Gibson Talback, and the rear is a Duncan SH-4. You can enjoy a powerful, driven sound.
The guitar shows signs of use commensurate with its age; there are dents and scratches throughout, and the transition between the neck binding and the neck itself has a slight step due to shrinkage. Similarly, there is a step at the junction of the headstock binding caused by shrinkage, and the finish over the inlays on the headstock top is chipped in some areas.
Additionally, there is evidence of previous finish repairs on the back of the neck, and the body has been relacquered.
In addition to the aforementioned pickup replacement, the nut, pickguard (Made in Japan), and bridge (Made in Japan) have been replaced.
Furthermore, after arrival, the strap pins and volume pot were replaced, the frets were leveled, and a full setup was performed. Although this instrument has undergone significant work, it is in player’s condition and still plays very well.
The case is a hard case from a different era.
Condition Grade: B: Shows significant wear and signs of use, but is in good working order for normal use
Serial Number: 94032672
Year of Manufacture: 1994
Country of Manufacture: USA
Case: Hard case
Weight: 4.95 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 44.0 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 25.1 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
It features a maple top and mahogany back, with a mahogany neck and ebony fingerboard. True to its Custom model heritage, this is a substantial instrument that delivers punchy, tight low-end tones.
Both pickups have been replaced: the front is a Gibson Talback, and the rear is a Duncan SH-4. You can enjoy a powerful, driven sound.
The guitar shows signs of use commensurate with its age; there are dents and scratches throughout, and the transition between the neck binding and the neck itself has a slight step due to shrinkage. Similarly, there is a step at the junction of the headstock binding caused by shrinkage, and the finish over the inlays on the headstock top is chipped in some areas.
Additionally, there is evidence of previous finish repairs on the back of the neck, and the body has been relacquered.
In addition to the aforementioned pickup replacement, the nut, pickguard (Made in Japan), and bridge (Made in Japan) have been replaced.
Furthermore, after arrival, the strap pins and volume pot were replaced, the frets were leveled, and a full setup was performed. Although this instrument has undergone significant work, it is in player’s condition and still plays very well.
The case is a hard case from a different era.
Condition Grade: B: Shows significant wear and signs of use, but is in good working order for normal use
Serial Number: 94032672
Year of Manufacture: 1994
Country of Manufacture: USA
Case: Hard case
Weight: 4.95 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 44.0 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 25.1 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$6.51
Original: $18.59
-65%[SN 94032672] USED GIBSON / Les Paul Custom 1994 Ebony [06]—
$18.59
$6.51
Description
A 1994 Les Paul Custom has arrived in stock!
It features a maple top and mahogany back, with a mahogany neck and ebony fingerboard. True to its Custom model heritage, this is a substantial instrument that delivers punchy, tight low-end tones.
Both pickups have been replaced: the front is a Gibson Talback, and the rear is a Duncan SH-4. You can enjoy a powerful, driven sound.
The guitar shows signs of use commensurate with its age; there are dents and scratches throughout, and the transition between the neck binding and the neck itself has a slight step due to shrinkage. Similarly, there is a step at the junction of the headstock binding caused by shrinkage, and the finish over the inlays on the headstock top is chipped in some areas.
Additionally, there is evidence of previous finish repairs on the back of the neck, and the body has been relacquered.
In addition to the aforementioned pickup replacement, the nut, pickguard (Made in Japan), and bridge (Made in Japan) have been replaced.
Furthermore, after arrival, the strap pins and volume pot were replaced, the frets were leveled, and a full setup was performed. Although this instrument has undergone significant work, it is in player’s condition and still plays very well.
The case is a hard case from a different era.
Condition Grade: B: Shows significant wear and signs of use, but is in good working order for normal use
Serial Number: 94032672
Year of Manufacture: 1994
Country of Manufacture: USA
Case: Hard case
Weight: 4.95 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 44.0 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 25.1 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
It features a maple top and mahogany back, with a mahogany neck and ebony fingerboard. True to its Custom model heritage, this is a substantial instrument that delivers punchy, tight low-end tones.
Both pickups have been replaced: the front is a Gibson Talback, and the rear is a Duncan SH-4. You can enjoy a powerful, driven sound.
The guitar shows signs of use commensurate with its age; there are dents and scratches throughout, and the transition between the neck binding and the neck itself has a slight step due to shrinkage. Similarly, there is a step at the junction of the headstock binding caused by shrinkage, and the finish over the inlays on the headstock top is chipped in some areas.
Additionally, there is evidence of previous finish repairs on the back of the neck, and the body has been relacquered.
In addition to the aforementioned pickup replacement, the nut, pickguard (Made in Japan), and bridge (Made in Japan) have been replaced.
Furthermore, after arrival, the strap pins and volume pot were replaced, the frets were leveled, and a full setup was performed. Although this instrument has undergone significant work, it is in player’s condition and still plays very well.
The case is a hard case from a different era.
Condition Grade: B: Shows significant wear and signs of use, but is in good working order for normal use
Serial Number: 94032672
Year of Manufacture: 1994
Country of Manufacture: USA
Case: Hard case
Weight: 4.95 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 44.0 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 25.1 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
