🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore
[SN MX24019730] USED FENDER MEXICO / Vintera II '70s Competition Mustang Competition Orange [06]
[SN MX24019730] USED FENDER MEXICO / Vintera II '70s Competition Mustang Competition Orange [06]
We've just received a used FENDER MEXICO Vintera II '70s Competition Mustang in Competition Orange!
Made in Mexico in 2024.
A '70s-style Mustang featuring the Competition line.
Features an alder body, maple neck, and slab-jointed rosewood fingerboard.
Equipped with two Vintage-Style '70s Single-Coil Mustang pickups.
It features a 6-saddle Vintage-Style Mustang Tremolo bridge and Fender Vintage "F" tuners stamped with white buttons.
While there are some minor scratches, dents, and tarnish on the metal parts, it is in good condition for a used instrument.
It has been cleaned and fully adjusted upon arrival and plays perfectly.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: MX24019730
Year of Manufacture: 2024
Country of Manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, nut slot correction, tremolo adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Made in Mexico in 2024.
A '70s-style Mustang featuring the Competition line.
Features an alder body, maple neck, and slab-jointed rosewood fingerboard.
Equipped with two Vintage-Style '70s Single-Coil Mustang pickups.
It features a 6-saddle Vintage-Style Mustang Tremolo bridge and Fender Vintage "F" tuners stamped with white buttons.
While there are some minor scratches, dents, and tarnish on the metal parts, it is in good condition for a used instrument.
It has been cleaned and fully adjusted upon arrival and plays perfectly.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: MX24019730
Year of Manufacture: 2024
Country of Manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, nut slot correction, tremolo adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$6.22
[SN MX24019730] USED FENDER MEXICO / Vintera II '70s Competition Mustang Competition Orange [06]—
$6.22
Description
We've just received a used FENDER MEXICO Vintera II '70s Competition Mustang in Competition Orange!
Made in Mexico in 2024.
A '70s-style Mustang featuring the Competition line.
Features an alder body, maple neck, and slab-jointed rosewood fingerboard.
Equipped with two Vintage-Style '70s Single-Coil Mustang pickups.
It features a 6-saddle Vintage-Style Mustang Tremolo bridge and Fender Vintage "F" tuners stamped with white buttons.
While there are some minor scratches, dents, and tarnish on the metal parts, it is in good condition for a used instrument.
It has been cleaned and fully adjusted upon arrival and plays perfectly.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: MX24019730
Year of Manufacture: 2024
Country of Manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, nut slot correction, tremolo adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Made in Mexico in 2024.
A '70s-style Mustang featuring the Competition line.
Features an alder body, maple neck, and slab-jointed rosewood fingerboard.
Equipped with two Vintage-Style '70s Single-Coil Mustang pickups.
It features a 6-saddle Vintage-Style Mustang Tremolo bridge and Fender Vintage "F" tuners stamped with white buttons.
While there are some minor scratches, dents, and tarnish on the metal parts, it is in good condition for a used instrument.
It has been cleaned and fully adjusted upon arrival and plays perfectly.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: MX24019730
Year of Manufacture: 2024
Country of Manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.54 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 610mm (24")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, nut slot correction, tremolo adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
