🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore
[SN R39239] USED FENDER CUSTOM SHOP / 1972 Telecaster Custom Closet Classic 3-Color Sunburst [06]
[SN R39239] USED FENDER CUSTOM SHOP / 1972 Telecaster Custom Closet Classic 3-Color Sunburst [06]
A used 2013 Fender Custom Shop '72 Telecaster Custom has arrived!!
The instrument features a sunburst-colored ash body, a C-shaped maple neck, and a maple fingerboard. While it incorporates early 1970s specifications—such as a three-point neck joint, a bullet truss rod, and F-key tuners—it also features a back contour that wasn’t available at the time.
It is equipped with a Wide Range humbucker in the front pickup position and a hand-wound Twisted Tele pickup signed by Ms. Josefinna in the rear. The bridge features a set of three grooved stainless steel saddles.
The neck shows slight warping, but this does not affect playability.
The body shows general wear typical for its age, including dents, scratches, playing wear, and some tarnish and rust on the metal parts. However, it has been cleaned, fully adjusted, and had its frets leveled since arrival, so it is ready for use.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: R39239
Year of Manufacture: 2013
Country of Manufacture: USA
Case: Hard Case
Accessories: Certificate of Authenticity, Bridge Cover
Weight: 3.30 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 22.0 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, or string action were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The instrument features a sunburst-colored ash body, a C-shaped maple neck, and a maple fingerboard. While it incorporates early 1970s specifications—such as a three-point neck joint, a bullet truss rod, and F-key tuners—it also features a back contour that wasn’t available at the time.
It is equipped with a Wide Range humbucker in the front pickup position and a hand-wound Twisted Tele pickup signed by Ms. Josefinna in the rear. The bridge features a set of three grooved stainless steel saddles.
The neck shows slight warping, but this does not affect playability.
The body shows general wear typical for its age, including dents, scratches, playing wear, and some tarnish and rust on the metal parts. However, it has been cleaned, fully adjusted, and had its frets leveled since arrival, so it is ready for use.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: R39239
Year of Manufacture: 2013
Country of Manufacture: USA
Case: Hard Case
Accessories: Certificate of Authenticity, Bridge Cover
Weight: 3.30 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 22.0 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, or string action were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$7.76
Original: $22.18
-65%[SN R39239] USED FENDER CUSTOM SHOP / 1972 Telecaster Custom Closet Classic 3-Color Sunburst [06]—
$22.18
$7.76
Description
A used 2013 Fender Custom Shop '72 Telecaster Custom has arrived!!
The instrument features a sunburst-colored ash body, a C-shaped maple neck, and a maple fingerboard. While it incorporates early 1970s specifications—such as a three-point neck joint, a bullet truss rod, and F-key tuners—it also features a back contour that wasn’t available at the time.
It is equipped with a Wide Range humbucker in the front pickup position and a hand-wound Twisted Tele pickup signed by Ms. Josefinna in the rear. The bridge features a set of three grooved stainless steel saddles.
The neck shows slight warping, but this does not affect playability.
The body shows general wear typical for its age, including dents, scratches, playing wear, and some tarnish and rust on the metal parts. However, it has been cleaned, fully adjusted, and had its frets leveled since arrival, so it is ready for use.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: R39239
Year of Manufacture: 2013
Country of Manufacture: USA
Case: Hard Case
Accessories: Certificate of Authenticity, Bridge Cover
Weight: 3.30 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 22.0 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, or string action were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The instrument features a sunburst-colored ash body, a C-shaped maple neck, and a maple fingerboard. While it incorporates early 1970s specifications—such as a three-point neck joint, a bullet truss rod, and F-key tuners—it also features a back contour that wasn’t available at the time.
It is equipped with a Wide Range humbucker in the front pickup position and a hand-wound Twisted Tele pickup signed by Ms. Josefinna in the rear. The bridge features a set of three grooved stainless steel saddles.
The neck shows slight warping, but this does not affect playability.
The body shows general wear typical for its age, including dents, scratches, playing wear, and some tarnish and rust on the metal parts. However, it has been cleaned, fully adjusted, and had its frets leveled since arrival, so it is ready for use.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: R39239
Year of Manufacture: 2013
Country of Manufacture: USA
Case: Hard Case
Accessories: Certificate of Authenticity, Bridge Cover
Weight: 3.30 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 22.0 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, or string action were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
