🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore
[SN MX 25131532] USED FENDER MEXICO / Limited Edition 50th Anniversary Dave Murray Stratocaster Black [06]
[SN MX 25131532] USED FENDER MEXICO / Limited Edition 50th Anniversary Dave Murray Stratocaster Black [06]
We've just received a used FENDER MEXICO Limited Edition 50th Anniversary Dave Murray Stratocaster in Black!
Made in Mexico in 2025.
This is the signature model of Dave Murray, guitarist for the world-renowned heavy metal band Iron Maiden.
Features an alder body, maple neck, and rosewood fingerboard.
Pickups are by Seymour Duncan: a 59 SH-1N in the front, an Antiquity Texas Hot in the middle, and a JB TB-4 in the rear.
Features a Floyd Rose FRT-O1000 bridge.
There is some slight lifting of the pickguard.
While there are some minor scratches, dents, and tarnish on the metal parts, it is in good condition for a used item.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: MX 25131532
Country of Manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.68 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (limited remaining adjustment)
Fret wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.7 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 21.6 mm
Scale length: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Made in Mexico in 2025.
This is the signature model of Dave Murray, guitarist for the world-renowned heavy metal band Iron Maiden.
Features an alder body, maple neck, and rosewood fingerboard.
Pickups are by Seymour Duncan: a 59 SH-1N in the front, an Antiquity Texas Hot in the middle, and a JB TB-4 in the rear.
Features a Floyd Rose FRT-O1000 bridge.
There is some slight lifting of the pickguard.
While there are some minor scratches, dents, and tarnish on the metal parts, it is in good condition for a used item.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: MX 25131532
Country of Manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.68 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (limited remaining adjustment)
Fret wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.7 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 21.6 mm
Scale length: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$2.18
Original: $6.22
-65%[SN MX 25131532] USED FENDER MEXICO / Limited Edition 50th Anniversary Dave Murray Stratocaster Black [06]—
$6.22
$2.18
Description
We've just received a used FENDER MEXICO Limited Edition 50th Anniversary Dave Murray Stratocaster in Black!
Made in Mexico in 2025.
This is the signature model of Dave Murray, guitarist for the world-renowned heavy metal band Iron Maiden.
Features an alder body, maple neck, and rosewood fingerboard.
Pickups are by Seymour Duncan: a 59 SH-1N in the front, an Antiquity Texas Hot in the middle, and a JB TB-4 in the rear.
Features a Floyd Rose FRT-O1000 bridge.
There is some slight lifting of the pickguard.
While there are some minor scratches, dents, and tarnish on the metal parts, it is in good condition for a used item.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: MX 25131532
Country of Manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.68 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (limited remaining adjustment)
Fret wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.7 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 21.6 mm
Scale length: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Made in Mexico in 2025.
This is the signature model of Dave Murray, guitarist for the world-renowned heavy metal band Iron Maiden.
Features an alder body, maple neck, and rosewood fingerboard.
Pickups are by Seymour Duncan: a 59 SH-1N in the front, an Antiquity Texas Hot in the middle, and a JB TB-4 in the rear.
Features a Floyd Rose FRT-O1000 bridge.
There is some slight lifting of the pickguard.
While there are some minor scratches, dents, and tarnish on the metal parts, it is in good condition for a used item.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: MX 25131532
Country of Manufacture: Mexico
Case: Soft case
Accessories: Arm
Weight: 3.68 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (limited remaining adjustment)
Fret wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.7 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 21.6 mm
Scale length: 648mm (25.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
