🎉 Up to 70% Off Selected ItemsShop Sale
[SN JD13020281] USED FENDER JAPAN / ST72/LH VWT [06]
We’ve just received a used left-handed Fender Japan ST72 Stratocaster from 2013!
This Stratocaster recreates the features of the 1972 model, including a lightweight basswood body, a maple neck with a large headstock, a bullet nut, and a three-point neck joint.
The tremolo arm is missing. There are some playing scratches on the pickguard, but otherwise, it is in relatively good condition with no major visible damage.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JD13020281
Year of Manufacture: 2013
Country of Manufacture: Japan
Case: Soft case
Weight: 3.72 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
This Stratocaster recreates the features of the 1972 model, including a lightweight basswood body, a maple neck with a large headstock, a bullet nut, and a three-point neck joint.
The tremolo arm is missing. There are some playing scratches on the pickguard, but otherwise, it is in relatively good condition with no major visible damage.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JD13020281
Year of Manufacture: 2013
Country of Manufacture: Japan
Case: Soft case
Weight: 3.72 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
$1.76
Original: $5.03
-65%[SN JD13020281] USED FENDER JAPAN / ST72/LH VWT [06]—
$5.03
$1.76
Description
We’ve just received a used left-handed Fender Japan ST72 Stratocaster from 2013!
This Stratocaster recreates the features of the 1972 model, including a lightweight basswood body, a maple neck with a large headstock, a bullet nut, and a three-point neck joint.
The tremolo arm is missing. There are some playing scratches on the pickguard, but otherwise, it is in relatively good condition with no major visible damage.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JD13020281
Year of Manufacture: 2013
Country of Manufacture: Japan
Case: Soft case
Weight: 3.72 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
This Stratocaster recreates the features of the 1972 model, including a lightweight basswood body, a maple neck with a large headstock, a bullet nut, and a three-point neck joint.
The tremolo arm is missing. There are some playing scratches on the pickguard, but otherwise, it is in relatively good condition with no major visible damage.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JD13020281
Year of Manufacture: 2013
Country of Manufacture: Japan
Case: Soft case
Weight: 3.72 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
