🎉 Up to 70% Off Selected ItemsShop Sale
[SN MIJ/E784616] USED FENDER JAPAN / ST72-75 Yellow and White [06]
We've just received a used FENDER JAPAN ST72-75 in Yellow and White!
Manufactured by Fujigen from 1984 to 1987.
Features an "ST72-75" stamp on the neck pocket.
This is a model featuring a large headstock, a bullet truss rod cap, a three-point neck joint, and a scalloped fingerboard—likely sold prior to the release of Fender Japan’s Ingwie models.
The scalloping is wider on the G-string side and tapers toward the E-string side.
The pickups include Dimarzio HS-3s on the front and rear, with what appears to be a USA-made pickup in the middle.
There is some fading on the body finish.
There is paint chipping near the neck strap pin, paint chipping and a small crack at the neck joint, and significant paint peeling on the body side near the 1st string.
There are scratches on the headstock top and near the tuner on the 1st string side.
While there are minor scratches, dents, and some tarnish on the metal parts throughout the guitar, it is still a fully playable instrument.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: MIJ/E784616
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.4mm
Scale: 648mm (25.5")
Strings at setup: 09-42
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Manufactured by Fujigen from 1984 to 1987.
Features an "ST72-75" stamp on the neck pocket.
This is a model featuring a large headstock, a bullet truss rod cap, a three-point neck joint, and a scalloped fingerboard—likely sold prior to the release of Fender Japan’s Ingwie models.
The scalloping is wider on the G-string side and tapers toward the E-string side.
The pickups include Dimarzio HS-3s on the front and rear, with what appears to be a USA-made pickup in the middle.
There is some fading on the body finish.
There is paint chipping near the neck strap pin, paint chipping and a small crack at the neck joint, and significant paint peeling on the body side near the 1st string.
There are scratches on the headstock top and near the tuner on the 1st string side.
While there are minor scratches, dents, and some tarnish on the metal parts throughout the guitar, it is still a fully playable instrument.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: MIJ/E784616
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.4mm
Scale: 648mm (25.5")
Strings at setup: 09-42
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$2.47
Original: $7.05
-65%[SN MIJ/E784616] USED FENDER JAPAN / ST72-75 Yellow and White [06]—
$7.05
$2.47
Description
We've just received a used FENDER JAPAN ST72-75 in Yellow and White!
Manufactured by Fujigen from 1984 to 1987.
Features an "ST72-75" stamp on the neck pocket.
This is a model featuring a large headstock, a bullet truss rod cap, a three-point neck joint, and a scalloped fingerboard—likely sold prior to the release of Fender Japan’s Ingwie models.
The scalloping is wider on the G-string side and tapers toward the E-string side.
The pickups include Dimarzio HS-3s on the front and rear, with what appears to be a USA-made pickup in the middle.
There is some fading on the body finish.
There is paint chipping near the neck strap pin, paint chipping and a small crack at the neck joint, and significant paint peeling on the body side near the 1st string.
There are scratches on the headstock top and near the tuner on the 1st string side.
While there are minor scratches, dents, and some tarnish on the metal parts throughout the guitar, it is still a fully playable instrument.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: MIJ/E784616
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.4mm
Scale: 648mm (25.5")
Strings at setup: 09-42
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Manufactured by Fujigen from 1984 to 1987.
Features an "ST72-75" stamp on the neck pocket.
This is a model featuring a large headstock, a bullet truss rod cap, a three-point neck joint, and a scalloped fingerboard—likely sold prior to the release of Fender Japan’s Ingwie models.
The scalloping is wider on the G-string side and tapers toward the E-string side.
The pickups include Dimarzio HS-3s on the front and rear, with what appears to be a USA-made pickup in the middle.
There is some fading on the body finish.
There is paint chipping near the neck strap pin, paint chipping and a small crack at the neck joint, and significant paint peeling on the body side near the 1st string.
There are scratches on the headstock top and near the tuner on the 1st string side.
While there are minor scratches, dents, and some tarnish on the metal parts throughout the guitar, it is still a fully playable instrument.
It has been cleaned and fully adjusted since arrival and plays perfectly.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use
Serial Number: MIJ/E784616
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.34 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.4mm
Scale: 648mm (25.5")
Strings at setup: 09-42
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
