🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore
[SN S061352] USED Fender Japan / ST54-120DMC 2CS [3.61kg / made 2006-2008] Fender Japan [08]
[SN S061352] USED Fender Japan / ST54-120DMC 2CS [3.61kg / made 2006-2008] Fender Japan [08]
Model '54 with lacquer topcoat and DiMaggio Collection "Classical Vintage" pickups.
This is a Fender Japan Vintage Special Series ST54-120DMC. It has an ash body, V-shaped 1-piece maple neck, Dimarzio Classical Vintage DCS-1x3 PU, CTS pots with USA-made lever SW, and steel block S8F Vintage around the bridge.
The 8-point 1-ply pickguard, button-type string guide, and atmospheric lacquer coating make this model austere.
It shows signs of use (color fading, minor scratches and scuffs around the perimeter, ring marks and multiple dents on the back of the neck, scuffs and wipe marks, picking marks, buckle marks, fogging, bits and rust on metal parts, etc.).
The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the fret board is high enough for playing.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: S061352
Year of manufacture: 2006-2008
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.61kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 42.3mm
Neck Thickness near 1st fret: 23.6mm
Neck thickness near 12th fret: 25.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This is a Fender Japan Vintage Special Series ST54-120DMC. It has an ash body, V-shaped 1-piece maple neck, Dimarzio Classical Vintage DCS-1x3 PU, CTS pots with USA-made lever SW, and steel block S8F Vintage around the bridge.
The 8-point 1-ply pickguard, button-type string guide, and atmospheric lacquer coating make this model austere.
It shows signs of use (color fading, minor scratches and scuffs around the perimeter, ring marks and multiple dents on the back of the neck, scuffs and wipe marks, picking marks, buckle marks, fogging, bits and rust on metal parts, etc.).
The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the fret board is high enough for playing.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: S061352
Year of manufacture: 2006-2008
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.61kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 42.3mm
Neck Thickness near 1st fret: 23.6mm
Neck thickness near 12th fret: 25.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$2.51
Original: $7.16
-65%[SN S061352] USED Fender Japan / ST54-120DMC 2CS [3.61kg / made 2006-2008] Fender Japan [08]—
$7.16
$2.51
Description
Model '54 with lacquer topcoat and DiMaggio Collection "Classical Vintage" pickups.
This is a Fender Japan Vintage Special Series ST54-120DMC. It has an ash body, V-shaped 1-piece maple neck, Dimarzio Classical Vintage DCS-1x3 PU, CTS pots with USA-made lever SW, and steel block S8F Vintage around the bridge.
The 8-point 1-ply pickguard, button-type string guide, and atmospheric lacquer coating make this model austere.
It shows signs of use (color fading, minor scratches and scuffs around the perimeter, ring marks and multiple dents on the back of the neck, scuffs and wipe marks, picking marks, buckle marks, fogging, bits and rust on metal parts, etc.).
The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the fret board is high enough for playing.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: S061352
Year of manufacture: 2006-2008
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.61kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 42.3mm
Neck Thickness near 1st fret: 23.6mm
Neck thickness near 12th fret: 25.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This is a Fender Japan Vintage Special Series ST54-120DMC. It has an ash body, V-shaped 1-piece maple neck, Dimarzio Classical Vintage DCS-1x3 PU, CTS pots with USA-made lever SW, and steel block S8F Vintage around the bridge.
The 8-point 1-ply pickguard, button-type string guide, and atmospheric lacquer coating make this model austere.
It shows signs of use (color fading, minor scratches and scuffs around the perimeter, ring marks and multiple dents on the back of the neck, scuffs and wipe marks, picking marks, buckle marks, fogging, bits and rust on metal parts, etc.).
The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the fret board is high enough for playing.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: S061352
Year of manufacture: 2006-2008
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.61kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 42.3mm
Neck Thickness near 1st fret: 23.6mm
Neck thickness near 12th fret: 25.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
