🎉 Up to 70% Off Selected ItemsShop Sale
[SN 0093] USED b3 / SL-K Black [3.87 kg] Gene Baker B3 Made in Japan [08]
This is the SL-K, a "b3" Built By Baker model made in Japan.
Gene Baker boasts a diverse career in guitar making, having headed the custom shops for both Gibson and Fender, as well as D’Angelico.Based on the specifications of the USA SL Model, the Made in Japan SL-K is a collaboration with Yoshiyuki Kikuchi. It features a maple top, mahogany back, mahogany neck, rosewood fingerboard, medium scale, original humbucker, 2-volume/2-tone (pull-coil split) controls, a 3-way selector switch, and GOTOH tuners and bridge.
Following in the footsteps of the SL series—which can be considered the origin of b3 Guitars—this is a hybrid model combining LP and ST styles.
Signs of use (scratches, wipe marks, picking marks, tarnish, pitting, and rust on metal parts and screws, etc.) are visible.
Set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and fret leveling). The frets are at a height suitable for playing, and the truss rod has been checked up to 60 degrees in both directions and is in good condition.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 0093
Country of Manufacture: Japan
Case: Hard Case
Accessories: Case key
Weight: 3.87 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Scale: 628mm (24.75")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Gene Baker boasts a diverse career in guitar making, having headed the custom shops for both Gibson and Fender, as well as D’Angelico.Based on the specifications of the USA SL Model, the Made in Japan SL-K is a collaboration with Yoshiyuki Kikuchi. It features a maple top, mahogany back, mahogany neck, rosewood fingerboard, medium scale, original humbucker, 2-volume/2-tone (pull-coil split) controls, a 3-way selector switch, and GOTOH tuners and bridge.
Following in the footsteps of the SL series—which can be considered the origin of b3 Guitars—this is a hybrid model combining LP and ST styles.
Signs of use (scratches, wipe marks, picking marks, tarnish, pitting, and rust on metal parts and screws, etc.) are visible.
Set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and fret leveling). The frets are at a height suitable for playing, and the truss rod has been checked up to 60 degrees in both directions and is in good condition.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 0093
Country of Manufacture: Japan
Case: Hard Case
Accessories: Case key
Weight: 3.87 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Scale: 628mm (24.75")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$3.41
Original: $9.73
-65%[SN 0093] USED b3 / SL-K Black [3.87 kg] Gene Baker B3 Made in Japan [08]—
$9.73
$3.41
Description
This is the SL-K, a "b3" Built By Baker model made in Japan.
Gene Baker boasts a diverse career in guitar making, having headed the custom shops for both Gibson and Fender, as well as D’Angelico.Based on the specifications of the USA SL Model, the Made in Japan SL-K is a collaboration with Yoshiyuki Kikuchi. It features a maple top, mahogany back, mahogany neck, rosewood fingerboard, medium scale, original humbucker, 2-volume/2-tone (pull-coil split) controls, a 3-way selector switch, and GOTOH tuners and bridge.
Following in the footsteps of the SL series—which can be considered the origin of b3 Guitars—this is a hybrid model combining LP and ST styles.
Signs of use (scratches, wipe marks, picking marks, tarnish, pitting, and rust on metal parts and screws, etc.) are visible.
Set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and fret leveling). The frets are at a height suitable for playing, and the truss rod has been checked up to 60 degrees in both directions and is in good condition.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 0093
Country of Manufacture: Japan
Case: Hard Case
Accessories: Case key
Weight: 3.87 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Scale: 628mm (24.75")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Gene Baker boasts a diverse career in guitar making, having headed the custom shops for both Gibson and Fender, as well as D’Angelico.Based on the specifications of the USA SL Model, the Made in Japan SL-K is a collaboration with Yoshiyuki Kikuchi. It features a maple top, mahogany back, mahogany neck, rosewood fingerboard, medium scale, original humbucker, 2-volume/2-tone (pull-coil split) controls, a 3-way selector switch, and GOTOH tuners and bridge.
Following in the footsteps of the SL series—which can be considered the origin of b3 Guitars—this is a hybrid model combining LP and ST styles.
Signs of use (scratches, wipe marks, picking marks, tarnish, pitting, and rust on metal parts and screws, etc.) are visible.
Set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and fret leveling). The frets are at a height suitable for playing, and the truss rod has been checked up to 60 degrees in both directions and is in good condition.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 0093
Country of Manufacture: Japan
Case: Hard Case
Accessories: Case key
Weight: 3.87 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Scale: 628mm (24.75")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
