🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

[SN 2990] USED momose / MT2-STD/M WBD [3.20 kg] Momose Made in Japan [08]

[SN 2990] USED momose / MT2-STD/M WBD [3.20 kg] Momose Made in Japan [08]

This is the MC2-MV/M from the "ORIGINAL series" of Momose, a brand named after Asuka Factory's master builder, Yasuo Momose.

It features a two-piece ash body with a contoured back, a recessed joint plate, a maple neck, a maple fingerboard, 22 frets, a VT-1 pickup, a DEVISER/DTB-1 bridge, GOTOH/SD91-05M locking tuners, and a lacquer finish on the top.

Weighing in at 3.20 kg, it offers exquisite balance. This guitar is characterized by modern playability and a sound rich in both modern and vintage tones, and its excellent handling is another major appeal.

The pickguard has been replaced, and there are signs of use (including minor scratches and scuffs around the edges, paint chips, marks from a guitar stand on the end, scuffs and wipe marks, picking marks, buckle marks, ring marks on the back of the neck, and exterior damage such as verdigris, clouding, tarnish, and rust on metal parts and screws).

Set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and fret leveling). The frets are at a height suitable for playing, and the truss rod has been tested to 60 degrees in both directions with no issues.

Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: 2990
Country of Manufacture: Japan
Case: Soft case (non-original)
Weight: 3.20 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Nut width: 42.0 mm
Scale: 648mm (25.5 inches)
Radius: 210R
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
$1.76

Original: $5.03

-65%
[SN 2990] USED momose / MT2-STD/M WBD [3.20 kg] Momose Made in Japan [08]

$5.03

$1.76
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9

Description

This is the MC2-MV/M from the "ORIGINAL series" of Momose, a brand named after Asuka Factory's master builder, Yasuo Momose.

It features a two-piece ash body with a contoured back, a recessed joint plate, a maple neck, a maple fingerboard, 22 frets, a VT-1 pickup, a DEVISER/DTB-1 bridge, GOTOH/SD91-05M locking tuners, and a lacquer finish on the top.

Weighing in at 3.20 kg, it offers exquisite balance. This guitar is characterized by modern playability and a sound rich in both modern and vintage tones, and its excellent handling is another major appeal.

The pickguard has been replaced, and there are signs of use (including minor scratches and scuffs around the edges, paint chips, marks from a guitar stand on the end, scuffs and wipe marks, picking marks, buckle marks, ring marks on the back of the neck, and exterior damage such as verdigris, clouding, tarnish, and rust on metal parts and screws).

Set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and fret leveling). The frets are at a height suitable for playing, and the truss rod has been tested to 60 degrees in both directions with no issues.

Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: 2990
Country of Manufacture: Japan
Case: Soft case (non-original)
Weight: 3.20 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
Nut width: 42.0 mm
Scale: 648mm (25.5 inches)
Radius: 210R
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.