🎉 Up to 70% Off Selected ItemsShop Sale
[SN F004676] USED Fender Japan / ST54-135 CUSTOM MADE EXTRAD [10]
Fender Japan's top-of-the-line EXTRAD series
We are pleased to announce the arrival of a sunburst color ST54-135 from Fender Japan's top-of-the-line EXTRAD series! The serial number starts with F (1986-1987), but the neck date is listed as 1989.
Manufactured by Fujigen, this model has luxurious specs that rival the original, including carefully selected woods, USA-made parts, and a lacquer finish.
The 2-piece ash body, V-shaped maple 1-piece neck, 7.25-inch fingerboard R, and 1-piece pickguard are all based on the '54 model, while the 3-tone Sunburst color, Lace Sensor Gold pickups, and other specifications that seem to have been select-ordered are found throughout. This is a unique model.
Please note that the strap pins have been replaced with shear-type locking pins, and the locking pin parts are missing. The back panel is also missing.
The frets have been fully grated, the nut has been replaced, the wiring has been corrected, and the entire instrument has been cleaned and set up. The exterior of the instrument shows signs of use and damage commensurate with its age, such as scratches, dents, and paint reaction/degradation due to age. The remaining frets are approximately 70% full. Currently, the string height is adjusted at about 2.0mm on the 6th string side at the 12th fret and about 1.5mm on the 1st string side.
Neck ConditionNo major problems at present.
Truss RodTruss rod has room in both directions.
About 70% frets remaining
String height on 12F 6th string: approx. 2.0mm, 1st string: approx. 1.5mm
Country of manufacture Japan
CaseNon-genuine soft case
AccessoriesTremolo arm
Item rank: B: Fairly scratched and used, but no problem in normal use.
Serial number: F004676
Weight: 3.30kg
Item rank: B+: Some scratches, but no problem in normal use
Serial Number: F004676
Year of manufacture: 1986-1987
Country of manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.3kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL120 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut replacement, wiring correction
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
We are pleased to announce the arrival of a sunburst color ST54-135 from Fender Japan's top-of-the-line EXTRAD series! The serial number starts with F (1986-1987), but the neck date is listed as 1989.
Manufactured by Fujigen, this model has luxurious specs that rival the original, including carefully selected woods, USA-made parts, and a lacquer finish.
The 2-piece ash body, V-shaped maple 1-piece neck, 7.25-inch fingerboard R, and 1-piece pickguard are all based on the '54 model, while the 3-tone Sunburst color, Lace Sensor Gold pickups, and other specifications that seem to have been select-ordered are found throughout. This is a unique model.
Please note that the strap pins have been replaced with shear-type locking pins, and the locking pin parts are missing. The back panel is also missing.
The frets have been fully grated, the nut has been replaced, the wiring has been corrected, and the entire instrument has been cleaned and set up. The exterior of the instrument shows signs of use and damage commensurate with its age, such as scratches, dents, and paint reaction/degradation due to age. The remaining frets are approximately 70% full. Currently, the string height is adjusted at about 2.0mm on the 6th string side at the 12th fret and about 1.5mm on the 1st string side.
Neck ConditionNo major problems at present.
Truss RodTruss rod has room in both directions.
About 70% frets remaining
String height on 12F 6th string: approx. 2.0mm, 1st string: approx. 1.5mm
Country of manufacture Japan
CaseNon-genuine soft case
AccessoriesTremolo arm
Item rank: B: Fairly scratched and used, but no problem in normal use.
Serial number: F004676
Weight: 3.30kg
Item rank: B+: Some scratches, but no problem in normal use
Serial Number: F004676
Year of manufacture: 1986-1987
Country of manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.3kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL120 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut replacement, wiring correction
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$3.48
Original: $9.95
-65%[SN F004676] USED Fender Japan / ST54-135 CUSTOM MADE EXTRAD [10]—
$9.95
$3.48
Description
Fender Japan's top-of-the-line EXTRAD series
We are pleased to announce the arrival of a sunburst color ST54-135 from Fender Japan's top-of-the-line EXTRAD series! The serial number starts with F (1986-1987), but the neck date is listed as 1989.
Manufactured by Fujigen, this model has luxurious specs that rival the original, including carefully selected woods, USA-made parts, and a lacquer finish.
The 2-piece ash body, V-shaped maple 1-piece neck, 7.25-inch fingerboard R, and 1-piece pickguard are all based on the '54 model, while the 3-tone Sunburst color, Lace Sensor Gold pickups, and other specifications that seem to have been select-ordered are found throughout. This is a unique model.
Please note that the strap pins have been replaced with shear-type locking pins, and the locking pin parts are missing. The back panel is also missing.
The frets have been fully grated, the nut has been replaced, the wiring has been corrected, and the entire instrument has been cleaned and set up. The exterior of the instrument shows signs of use and damage commensurate with its age, such as scratches, dents, and paint reaction/degradation due to age. The remaining frets are approximately 70% full. Currently, the string height is adjusted at about 2.0mm on the 6th string side at the 12th fret and about 1.5mm on the 1st string side.
Neck ConditionNo major problems at present.
Truss RodTruss rod has room in both directions.
About 70% frets remaining
String height on 12F 6th string: approx. 2.0mm, 1st string: approx. 1.5mm
Country of manufacture Japan
CaseNon-genuine soft case
AccessoriesTremolo arm
Item rank: B: Fairly scratched and used, but no problem in normal use.
Serial number: F004676
Weight: 3.30kg
Item rank: B+: Some scratches, but no problem in normal use
Serial Number: F004676
Year of manufacture: 1986-1987
Country of manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.3kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL120 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut replacement, wiring correction
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
We are pleased to announce the arrival of a sunburst color ST54-135 from Fender Japan's top-of-the-line EXTRAD series! The serial number starts with F (1986-1987), but the neck date is listed as 1989.
Manufactured by Fujigen, this model has luxurious specs that rival the original, including carefully selected woods, USA-made parts, and a lacquer finish.
The 2-piece ash body, V-shaped maple 1-piece neck, 7.25-inch fingerboard R, and 1-piece pickguard are all based on the '54 model, while the 3-tone Sunburst color, Lace Sensor Gold pickups, and other specifications that seem to have been select-ordered are found throughout. This is a unique model.
Please note that the strap pins have been replaced with shear-type locking pins, and the locking pin parts are missing. The back panel is also missing.
The frets have been fully grated, the nut has been replaced, the wiring has been corrected, and the entire instrument has been cleaned and set up. The exterior of the instrument shows signs of use and damage commensurate with its age, such as scratches, dents, and paint reaction/degradation due to age. The remaining frets are approximately 70% full. Currently, the string height is adjusted at about 2.0mm on the 6th string side at the 12th fret and about 1.5mm on the 1st string side.
Neck ConditionNo major problems at present.
Truss RodTruss rod has room in both directions.
About 70% frets remaining
String height on 12F 6th string: approx. 2.0mm, 1st string: approx. 1.5mm
Country of manufacture Japan
CaseNon-genuine soft case
AccessoriesTremolo arm
Item rank: B: Fairly scratched and used, but no problem in normal use.
Serial number: F004676
Weight: 3.30kg
Item rank: B+: Some scratches, but no problem in normal use
Serial Number: F004676
Year of manufacture: 1986-1987
Country of manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.3kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL120 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut replacement, wiring correction
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
