🎉 Up to 70% Off Selected ItemsShop Sale
[SN 336872] USED Fender USA / Stratocaster Sunburst MOD 1972 [10]
Vintage Guitar
* The product shown in the image is all that is included, including accessories.
* Should any issues be found during the final pre-shipment inspection, we will notify you separately.
* Truss rod, remaining frets, string height, etc., are the settings measured during setup and adjustment at our repair center.
* This item is a one-of-a-kind piece.
As this item is listed on multiple marketplaces, we strive to promptly remove sold listings. However, this is not always in real-time. Should the item be sold out after your order is placed, we sincerely apologize and kindly ask for your understanding.
Condition Grade: B: Significant scratches & signs of use, but fully functional for normal use
Serial Number: 336872
Year of Manufacture: 1972
Country of Manufacture: USA
Case: Hard case (late 1970s type)
Accessories: None
Weight: 3.52kg
Truss Rod: Note: The truss rod is completely loose; currently no neck issues
Fret Wear: No issues; sufficient fret height remains
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.8mm above the 12th fret
Nut width: 40.5mm
Neck Thickness Near 1st Fret: 22.4mm
Neck Thickness at 12th Fret: 24.1mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
Other: Replaced: Medium jumbo size frets & cowbone nut, 5-way reverse switch & mount screws. Tremolo arm: May be a part from the same period (early 1970s) (difficult to determine if it was an original factory accessory). Missing part: Tremolo back panel
* As this is a used item, please be aware that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.
* Any measurements listed for truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives at your location.
* This item is a single, physical unit listed simultaneously on multiple platforms, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
* The product shown in the image is all that is included, including accessories.
* Should any issues be found during the final pre-shipment inspection, we will notify you separately.
* Truss rod, remaining frets, string height, etc., are the settings measured during setup and adjustment at our repair center.
* This item is a one-of-a-kind piece.
As this item is listed on multiple marketplaces, we strive to promptly remove sold listings. However, this is not always in real-time. Should the item be sold out after your order is placed, we sincerely apologize and kindly ask for your understanding.
Condition Grade: B: Significant scratches & signs of use, but fully functional for normal use
Serial Number: 336872
Year of Manufacture: 1972
Country of Manufacture: USA
Case: Hard case (late 1970s type)
Accessories: None
Weight: 3.52kg
Truss Rod: Note: The truss rod is completely loose; currently no neck issues
Fret Wear: No issues; sufficient fret height remains
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.8mm above the 12th fret
Nut width: 40.5mm
Neck Thickness Near 1st Fret: 22.4mm
Neck Thickness at 12th Fret: 24.1mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
Other: Replaced: Medium jumbo size frets & cowbone nut, 5-way reverse switch & mount screws. Tremolo arm: May be a part from the same period (early 1970s) (difficult to determine if it was an original factory accessory). Missing part: Tremolo back panel
* As this is a used item, please be aware that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.
* Any measurements listed for truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives at your location.
* This item is a single, physical unit listed simultaneously on multiple platforms, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
$16.96
Original: $48.46
-65%[SN 336872] USED Fender USA / Stratocaster Sunburst MOD 1972 [10]—
$48.46
$16.96
Description
Vintage Guitar
* The product shown in the image is all that is included, including accessories.
* Should any issues be found during the final pre-shipment inspection, we will notify you separately.
* Truss rod, remaining frets, string height, etc., are the settings measured during setup and adjustment at our repair center.
* This item is a one-of-a-kind piece.
As this item is listed on multiple marketplaces, we strive to promptly remove sold listings. However, this is not always in real-time. Should the item be sold out after your order is placed, we sincerely apologize and kindly ask for your understanding.
Condition Grade: B: Significant scratches & signs of use, but fully functional for normal use
Serial Number: 336872
Year of Manufacture: 1972
Country of Manufacture: USA
Case: Hard case (late 1970s type)
Accessories: None
Weight: 3.52kg
Truss Rod: Note: The truss rod is completely loose; currently no neck issues
Fret Wear: No issues; sufficient fret height remains
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.8mm above the 12th fret
Nut width: 40.5mm
Neck Thickness Near 1st Fret: 22.4mm
Neck Thickness at 12th Fret: 24.1mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
Other: Replaced: Medium jumbo size frets & cowbone nut, 5-way reverse switch & mount screws. Tremolo arm: May be a part from the same period (early 1970s) (difficult to determine if it was an original factory accessory). Missing part: Tremolo back panel
* As this is a used item, please be aware that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.
* Any measurements listed for truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives at your location.
* This item is a single, physical unit listed simultaneously on multiple platforms, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
* The product shown in the image is all that is included, including accessories.
* Should any issues be found during the final pre-shipment inspection, we will notify you separately.
* Truss rod, remaining frets, string height, etc., are the settings measured during setup and adjustment at our repair center.
* This item is a one-of-a-kind piece.
As this item is listed on multiple marketplaces, we strive to promptly remove sold listings. However, this is not always in real-time. Should the item be sold out after your order is placed, we sincerely apologize and kindly ask for your understanding.
Condition Grade: B: Significant scratches & signs of use, but fully functional for normal use
Serial Number: 336872
Year of Manufacture: 1972
Country of Manufacture: USA
Case: Hard case (late 1970s type)
Accessories: None
Weight: 3.52kg
Truss Rod: Note: The truss rod is completely loose; currently no neck issues
Fret Wear: No issues; sufficient fret height remains
String Height (Low-String Side): 2.0mm at 12th fret
String height (treble side): 1.8mm above the 12th fret
Nut width: 40.5mm
Neck Thickness Near 1st Fret: 22.4mm
Neck Thickness at 12th Fret: 24.1mm
Scale length: 648mm (25.5")
Fingerboard radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
Other: Replaced: Medium jumbo size frets & cowbone nut, 5-way reverse switch & mount screws. Tremolo arm: May be a part from the same period (early 1970s) (difficult to determine if it was an original factory accessory). Missing part: Tremolo back panel
* As this is a used item, please be aware that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.
* Any measurements listed for truss rod, remaining frets, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives at your location.
* This item is a single, physical unit listed simultaneously on multiple platforms, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
