🎉 Up to 70% Off Selected ItemsShop Sale
[SN 028238] USED YAMAHA / SG-2000 Red Sunburst MOD [10]
Synonymous with Japan Vintage!
* The items shown in the pictures are all the items including accessories.
* We will inform you if there are any problems during the final check before shipping.
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We are sorry to inform you that this item is sold out after you place an order, but we try to delete the information as soon as possible.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: 028238
Year of manufacture: 1981
Country of manufacture: Japan
Case: Soft case
Weight: 4.62kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.8mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Changes: The front PU was replaced with a BILL LAWRENCE / L-500L by the previous owner. Most of the control pots have also been replaced.
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring
Other: There is one different type of set screw on the front PU escutcheon and one set screw is missing. Also, the point washer for the front PU volume control is missing.
* Please note that this is a used instrument and there are scratches, dents, etc. that may not show up in the photos or are not listed on the listing. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
* The items shown in the pictures are all the items including accessories.
* We will inform you if there are any problems during the final check before shipping.
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We are sorry to inform you that this item is sold out after you place an order, but we try to delete the information as soon as possible.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: 028238
Year of manufacture: 1981
Country of manufacture: Japan
Case: Soft case
Weight: 4.62kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.8mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Changes: The front PU was replaced with a BILL LAWRENCE / L-500L by the previous owner. Most of the control pots have also been replaced.
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring
Other: There is one different type of set screw on the front PU escutcheon and one set screw is missing. Also, the point washer for the front PU volume control is missing.
* Please note that this is a used instrument and there are scratches, dents, etc. that may not show up in the photos or are not listed on the listing. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$3.19
Original: $9.12
-65%[SN 028238] USED YAMAHA / SG-2000 Red Sunburst MOD [10]—
$9.12
$3.19
Description
Synonymous with Japan Vintage!
* The items shown in the pictures are all the items including accessories.
* We will inform you if there are any problems during the final check before shipping.
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We are sorry to inform you that this item is sold out after you place an order, but we try to delete the information as soon as possible.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: 028238
Year of manufacture: 1981
Country of manufacture: Japan
Case: Soft case
Weight: 4.62kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.8mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Changes: The front PU was replaced with a BILL LAWRENCE / L-500L by the previous owner. Most of the control pots have also been replaced.
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring
Other: There is one different type of set screw on the front PU escutcheon and one set screw is missing. Also, the point washer for the front PU volume control is missing.
* Please note that this is a used instrument and there are scratches, dents, etc. that may not show up in the photos or are not listed on the listing. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
* The items shown in the pictures are all the items including accessories.
* We will inform you if there are any problems during the final check before shipping.
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We are sorry to inform you that this item is sold out after you place an order, but we try to delete the information as soon as possible.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: 028238
Year of manufacture: 1981
Country of manufacture: Japan
Case: Soft case
Weight: 4.62kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.8mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Changes: The front PU was replaced with a BILL LAWRENCE / L-500L by the previous owner. Most of the control pots have also been replaced.
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring
Other: There is one different type of set screw on the front PU escutcheon and one set screw is missing. Also, the point washer for the front PU volume control is missing.
* Please note that this is a used instrument and there are scratches, dents, etc. that may not show up in the photos or are not listed on the listing. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
