🎉 Up to 70% Off Selected ItemsShop Sale
[SN SG53186] USED Sterling / Cutlass CT50 HSS Rose Gold [10]
A used Stalin-made cutlass with a roasted neck has arrived!
* The item shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: SG53186
Country of Manufacture: Indonesia
Case: Soft case
Accessories: Arm, Locking Pin
Weight: 3.45 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set (manufacturer's recommendation)
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: There are general scuffs and small dents, color transfer on the lower part of the body, and paint cracks on both sides of the neck pocket. However, thanks to the metallic finish, there is relatively little damage that stands out at first glance.
* As this is a used item, there may be scratches, dents, and other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
* The item shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: SG53186
Country of Manufacture: Indonesia
Case: Soft case
Accessories: Arm, Locking Pin
Weight: 3.45 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set (manufacturer's recommendation)
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: There are general scuffs and small dents, color transfer on the lower part of the body, and paint cracks on both sides of the neck pocket. However, thanks to the metallic finish, there is relatively little damage that stands out at first glance.
* As this is a used item, there may be scratches, dents, and other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$0.82
Original: $2.34
-65%[SN SG53186] USED Sterling / Cutlass CT50 HSS Rose Gold [10]—
$2.34
$0.82
Description
A used Stalin-made cutlass with a roasted neck has arrived!
* The item shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: SG53186
Country of Manufacture: Indonesia
Case: Soft case
Accessories: Arm, Locking Pin
Weight: 3.45 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set (manufacturer's recommendation)
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: There are general scuffs and small dents, color transfer on the lower part of the body, and paint cracks on both sides of the neck pocket. However, thanks to the metallic finish, there is relatively little damage that stands out at first glance.
* As this is a used item, there may be scratches, dents, and other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
* The item shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: SG53186
Country of Manufacture: Indonesia
Case: Soft case
Accessories: Arm, Locking Pin
Weight: 3.45 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set (manufacturer's recommendation)
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: There are general scuffs and small dents, color transfer on the lower part of the body, and paint cracks on both sides of the neck pocket. However, thanks to the metallic finish, there is relatively little damage that stands out at first glance.
* As this is a used item, there may be scratches, dents, and other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
