🎉 Up to 70% Off Selected ItemsShop Sale
[SN I171281] USED FUJIGEN / Virtuoso FL VFL RW1P-ATMH/NT [10]
A used, ultra-rare one-off model from the Virtuoso series has arrived
* The item shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove product listings promptly upon sale, but updates may not always be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: I171281
Year of Manufacture: 2017
Country of Manufacture: Japan
Case: Hard Case
Accessories: Wrench
Weight: 4.06 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 628mm (24.75")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: There are dents accompanied by paint cracks along the outer edge of the body top. There is a crack in the screw hole of the front pickup escutcheon, but it is currently barely holding the pickup in place, and the damage is not immediately noticeable. The hardware functions properly and has been polished to a relatively clean finish.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
* The item shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove product listings promptly upon sale, but updates may not always be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: I171281
Year of Manufacture: 2017
Country of Manufacture: Japan
Case: Hard Case
Accessories: Wrench
Weight: 4.06 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 628mm (24.75")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: There are dents accompanied by paint cracks along the outer edge of the body top. There is a crack in the screw hole of the front pickup escutcheon, but it is currently barely holding the pickup in place, and the damage is not immediately noticeable. The hardware functions properly and has been polished to a relatively clean finish.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$18.59
[SN I171281] USED FUJIGEN / Virtuoso FL VFL RW1P-ATMH/NT [10]—
$18.59
Description
A used, ultra-rare one-off model from the Virtuoso series has arrived
* The item shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove product listings promptly upon sale, but updates may not always be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: I171281
Year of Manufacture: 2017
Country of Manufacture: Japan
Case: Hard Case
Accessories: Wrench
Weight: 4.06 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 628mm (24.75")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: There are dents accompanied by paint cracks along the outer edge of the body top. There is a crack in the screw hole of the front pickup escutcheon, but it is currently barely holding the pickup in place, and the damage is not immediately noticeable. The hardware functions properly and has been polished to a relatively clean finish.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
* The item shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove product listings promptly upon sale, but updates may not always be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: I171281
Year of Manufacture: 2017
Country of Manufacture: Japan
Case: Hard Case
Accessories: Wrench
Weight: 4.06 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: No issues; in like-new condition
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 628mm (24.75")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: There are dents accompanied by paint cracks along the outer edge of the body top. There is a crack in the screw hole of the front pickup escutcheon, but it is currently barely holding the pickup in place, and the damage is not immediately noticeable. The hardware functions properly and has been polished to a relatively clean finish.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
