🎉 Up to 70% Off Selected ItemsShop Sale
[SN E9630202] USED ESP / RODEOholic Burner [10]
GRANRODEO guitarist e-ZUKA's signature model!
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod tension, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove product listings promptly upon sale; however, updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: E9630202
Country of Manufacture: Japan
Case: Gig case
Accessories: Wrench
Weight: 3.42 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing; minor string marks present
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.1 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, truss rod adjustment, string replacement, string height adjustment, octave adjustment
Other: There are scattered wipe marks and scuffs on the body, and the finish on the neck grip appears slightly cloudy, but it does not give a bad impression, and there is little damage that stands out at first glance. While the hardware shows some dullness, it functions properly and has been polished relatively well.
* As this is a used item, there may be scratches, dents, or other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod tension, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove product listings promptly upon sale; however, updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: E9630202
Country of Manufacture: Japan
Case: Gig case
Accessories: Wrench
Weight: 3.42 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing; minor string marks present
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.1 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, truss rod adjustment, string replacement, string height adjustment, octave adjustment
Other: There are scattered wipe marks and scuffs on the body, and the finish on the neck grip appears slightly cloudy, but it does not give a bad impression, and there is little damage that stands out at first glance. While the hardware shows some dullness, it functions properly and has been polished relatively well.
* As this is a used item, there may be scratches, dents, or other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$4.90
Original: $14.00
-65%[SN E9630202] USED ESP / RODEOholic Burner [10]—
$14.00
$4.90
Description
GRANRODEO guitarist e-ZUKA's signature model!
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod tension, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove product listings promptly upon sale; however, updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: E9630202
Country of Manufacture: Japan
Case: Gig case
Accessories: Wrench
Weight: 3.42 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing; minor string marks present
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.1 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, truss rod adjustment, string replacement, string height adjustment, octave adjustment
Other: There are scattered wipe marks and scuffs on the body, and the finish on the neck grip appears slightly cloudy, but it does not give a bad impression, and there is little damage that stands out at first glance. While the hardware shows some dullness, it functions properly and has been polished relatively well.
* As this is a used item, there may be scratches, dents, or other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod tension, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove product listings promptly upon sale; however, updates may not be in real time. We sincerely apologize in advance if the item happens to be sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: E9630202
Country of Manufacture: Japan
Case: Gig case
Accessories: Wrench
Weight: 3.42 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing; minor string marks present
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.1 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, truss rod adjustment, string replacement, string height adjustment, octave adjustment
Other: There are scattered wipe marks and scuffs on the body, and the finish on the neck grip appears slightly cloudy, but it does not give a bad impression, and there is little damage that stands out at first glance. While the hardware shows some dullness, it functions properly and has been polished relatively well.
* As this is a used item, there may be scratches, dents, or other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
