🎉 Up to 70% Off Selected ItemsShop Sale
[SN 571356] USED Fender USA / 1974 Blonde Stratocaster [10]
A vintage Stratocaster in player's condition has arrived!
A 1974 Fender Stratocaster Blonde has arrived.
This guitar features the large headstock, bullet truss rod, and 3-point neck joint with micro-tilt adjustment that are emblematic of the CBS era of the 1970s.
The body is made of ash, and the grain stands out beautifully through the Blonde finish.
Weighing in at 3.78 kg, it is lightweight for an ash-bodied guitar of this era and offers a very comfortable balance.
The pickups, capacitors, and other metal and plastic parts have been kept original, allowing you to fully experience the edgy tone and quick attack characteristic of 1970s Fender guitars.
The pots, selector switch, and jack—parts prone to contact issues—have been replaced (though the original jack is included), which may provide peace of mind when actually using the guitar.
The frets have been replaced with jumbo-type frets, and during this process, the fingerboard was refinished and the nut was replaced.
The work has been meticulously finished, resulting in a highly playable condition that offers modern playability without compromising the vintage atmosphere.
There is a minute crack in the wood beneath the micro-tilt plate on the neck side.
Although this crack extends into the wood rather than being limited to the finish, it currently has no observable impact on the stability of the neck joint or playability, and is in a condition that poses no practical issues.
This is a "player's vintage" guitar that has been prepared for practical use while retaining the key parts essential for sound and the sense of ownership.
This is a guitar that lets you enjoy the distinctive look of a Blonde/Ash Body and the clear, punchy sound characteristic of a 70s Stratocaster.
* The item shown in the images, including all accessories, is what you will receive.
* If any issues are found during the final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from the setup and adjustment performed at our repair center.
* This is a one-of-a-kind item.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 571356
Year of Manufacture: 1974
Country of Manufacture: USA
Case: Hard case
Accessories: Original jack, * Tonearm missing
Weight: 3.78 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.8 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Potentiometers, jack, selector switch
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: The case features illustrations and stencils painted in white.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
A 1974 Fender Stratocaster Blonde has arrived.
This guitar features the large headstock, bullet truss rod, and 3-point neck joint with micro-tilt adjustment that are emblematic of the CBS era of the 1970s.
The body is made of ash, and the grain stands out beautifully through the Blonde finish.
Weighing in at 3.78 kg, it is lightweight for an ash-bodied guitar of this era and offers a very comfortable balance.
The pickups, capacitors, and other metal and plastic parts have been kept original, allowing you to fully experience the edgy tone and quick attack characteristic of 1970s Fender guitars.
The pots, selector switch, and jack—parts prone to contact issues—have been replaced (though the original jack is included), which may provide peace of mind when actually using the guitar.
The frets have been replaced with jumbo-type frets, and during this process, the fingerboard was refinished and the nut was replaced.
The work has been meticulously finished, resulting in a highly playable condition that offers modern playability without compromising the vintage atmosphere.
There is a minute crack in the wood beneath the micro-tilt plate on the neck side.
Although this crack extends into the wood rather than being limited to the finish, it currently has no observable impact on the stability of the neck joint or playability, and is in a condition that poses no practical issues.
This is a "player's vintage" guitar that has been prepared for practical use while retaining the key parts essential for sound and the sense of ownership.
This is a guitar that lets you enjoy the distinctive look of a Blonde/Ash Body and the clear, punchy sound characteristic of a 70s Stratocaster.
* The item shown in the images, including all accessories, is what you will receive.
* If any issues are found during the final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from the setup and adjustment performed at our repair center.
* This is a one-of-a-kind item.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 571356
Year of Manufacture: 1974
Country of Manufacture: USA
Case: Hard case
Accessories: Original jack, * Tonearm missing
Weight: 3.78 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.8 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Potentiometers, jack, selector switch
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: The case features illustrations and stencils painted in white.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$29.80
[SN 571356] USED Fender USA / 1974 Blonde Stratocaster [10]—
$29.80
Description
A vintage Stratocaster in player's condition has arrived!
A 1974 Fender Stratocaster Blonde has arrived.
This guitar features the large headstock, bullet truss rod, and 3-point neck joint with micro-tilt adjustment that are emblematic of the CBS era of the 1970s.
The body is made of ash, and the grain stands out beautifully through the Blonde finish.
Weighing in at 3.78 kg, it is lightweight for an ash-bodied guitar of this era and offers a very comfortable balance.
The pickups, capacitors, and other metal and plastic parts have been kept original, allowing you to fully experience the edgy tone and quick attack characteristic of 1970s Fender guitars.
The pots, selector switch, and jack—parts prone to contact issues—have been replaced (though the original jack is included), which may provide peace of mind when actually using the guitar.
The frets have been replaced with jumbo-type frets, and during this process, the fingerboard was refinished and the nut was replaced.
The work has been meticulously finished, resulting in a highly playable condition that offers modern playability without compromising the vintage atmosphere.
There is a minute crack in the wood beneath the micro-tilt plate on the neck side.
Although this crack extends into the wood rather than being limited to the finish, it currently has no observable impact on the stability of the neck joint or playability, and is in a condition that poses no practical issues.
This is a "player's vintage" guitar that has been prepared for practical use while retaining the key parts essential for sound and the sense of ownership.
This is a guitar that lets you enjoy the distinctive look of a Blonde/Ash Body and the clear, punchy sound characteristic of a 70s Stratocaster.
* The item shown in the images, including all accessories, is what you will receive.
* If any issues are found during the final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from the setup and adjustment performed at our repair center.
* This is a one-of-a-kind item.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 571356
Year of Manufacture: 1974
Country of Manufacture: USA
Case: Hard case
Accessories: Original jack, * Tonearm missing
Weight: 3.78 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.8 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Potentiometers, jack, selector switch
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: The case features illustrations and stencils painted in white.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
A 1974 Fender Stratocaster Blonde has arrived.
This guitar features the large headstock, bullet truss rod, and 3-point neck joint with micro-tilt adjustment that are emblematic of the CBS era of the 1970s.
The body is made of ash, and the grain stands out beautifully through the Blonde finish.
Weighing in at 3.78 kg, it is lightweight for an ash-bodied guitar of this era and offers a very comfortable balance.
The pickups, capacitors, and other metal and plastic parts have been kept original, allowing you to fully experience the edgy tone and quick attack characteristic of 1970s Fender guitars.
The pots, selector switch, and jack—parts prone to contact issues—have been replaced (though the original jack is included), which may provide peace of mind when actually using the guitar.
The frets have been replaced with jumbo-type frets, and during this process, the fingerboard was refinished and the nut was replaced.
The work has been meticulously finished, resulting in a highly playable condition that offers modern playability without compromising the vintage atmosphere.
There is a minute crack in the wood beneath the micro-tilt plate on the neck side.
Although this crack extends into the wood rather than being limited to the finish, it currently has no observable impact on the stability of the neck joint or playability, and is in a condition that poses no practical issues.
This is a "player's vintage" guitar that has been prepared for practical use while retaining the key parts essential for sound and the sense of ownership.
This is a guitar that lets you enjoy the distinctive look of a Blonde/Ash Body and the clear, punchy sound characteristic of a 70s Stratocaster.
* The item shown in the images, including all accessories, is what you will receive.
* If any issues are found during the final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from the setup and adjustment performed at our repair center.
* This is a one-of-a-kind item.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: 571356
Year of Manufacture: 1974
Country of Manufacture: USA
Case: Hard case
Accessories: Original jack, * Tonearm missing
Weight: 3.78 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.8 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Potentiometers, jack, selector switch
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: The case features illustrations and stencils painted in white.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
