🎉 Up to 70% Off Selected ItemsShop Sale
[SN JD13006083] USED Fender Japan / ST-STD 3-Tone Sunburst [10]
For those looking for a solidly built Strat!
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item is sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JD13006083
Year of Manufacture: 2013
Country of Manufacture: Japan
Case: Soft case
Accessories: - (*Arm missing)
Weight: 3.22 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 23.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: The ST-STD has arrived. Although there are some scratches on the body back cutaway and dents on the lower part of the body top, it is in clean condition and is a guitar that fully showcases the high quality of Japanese craftsmanship.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item is sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JD13006083
Year of Manufacture: 2013
Country of Manufacture: Japan
Case: Soft case
Accessories: - (*Arm missing)
Weight: 3.22 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 23.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: The ST-STD has arrived. Although there are some scratches on the body back cutaway and dents on the lower part of the body top, it is in clean condition and is a guitar that fully showcases the high quality of Japanese craftsmanship.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$3.80
[SN JD13006083] USED Fender Japan / ST-STD 3-Tone Sunburst [10]—
$3.80
Description
For those looking for a solidly built Strat!
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item is sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JD13006083
Year of Manufacture: 2013
Country of Manufacture: Japan
Case: Soft case
Accessories: - (*Arm missing)
Weight: 3.22 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 23.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: The ST-STD has arrived. Although there are some scratches on the body back cutaway and dents on the lower part of the body top, it is in clean condition and is a guitar that fully showcases the high quality of Japanese craftsmanship.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
* The product shown in the image includes all accessories.
* If any issues are found during our final pre-shipment inspection, we will notify you separately.
* The truss rod, remaining fret life, and string height are the settings from when the instrument was set up and adjusted at our repair center.
* This is a one-of-a-kind item.
Since this item is listed on multiple marketplaces, we strive to remove listings promptly once sold, but updates may not be in real time. We sincerely apologize in advance if the item is sold out after you place your order.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: JD13006083
Year of Manufacture: 2013
Country of Manufacture: Japan
Case: Soft case
Accessories: - (*Arm missing)
Weight: 3.22 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 23.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment
Other: The ST-STD has arrived. Although there are some scratches on the body back cutaway and dents on the lower part of the body top, it is in clean condition and is a guitar that fully showcases the high quality of Japanese craftsmanship.
* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item, and we are listing it simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
