🎉 Up to 70% Off Selected ItemsShop Sale
USED FERNANDES / TE-120S HT HOTEI Model Snow White-Black [11]
Fernandes has created a signature model that faithfully reproduces Hotei Tomoyasu's iconic Telecaster.
It features the so-called G-type black and white geometric pattern, Concorde headstock, and full-mode sustainer, specifications that are essential to the Hotei sound.
With a sustainer unit in the front and a humbucker in the rear, it achieves unique expressions such as infinitely long sustain and harmonic effects. It also allows for synth-like sound creation that cannot be achieved with a normal guitar. Controls include master volume, sustainer volume, 3-position sustainer mode switch, and sustainer ON/OFF switch.
The roller nut and tremolo unit ensure tuning stability during arm-based effects.
Its lightweight, easy-to-handle body balance and high playability are also appealing. This model makes a statement not only for live use but also as a collector's piece.
There was a crack on the 6th string side of the neck joint, which has been reinforced with adhesive.
The bridge stud anchor and body were loose and lifting, so reinforcement was applied via adhesive bonding.
The hole for the bridge saddle height adjustment set screw appears to have enlarged due to deterioration. It is currently set to the standard value.
The battery snap has been replaced.
The back panel is missing.
There is an impact mark with paint chipping on the underside of the headstock top, and paint cracking is present at the neck joint.
There are impact marks with paint cracks near the top corner control and other corners.
There are numerous impact marks on the body back corners accompanied by wood cracks, and numerous impact marks on the body sides and overall body back accompanied by paint cracks and chips.
Other minor scratches and dents indicate moderate signs of use.
The neck shows no noticeable abnormalities and is in good playing condition.
Condition Grade: B+: Some scratches present, but no issues for normal use.
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Tremolo arm
Weight: 3.65kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret depth: No issues. Sufficient fret height present
String Height (Low-String Side): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.0mm
Neck Thickness Near 1st Fret: 20.9mm
Neck Thickness Near 12th Fret: 22.0mm
Scale length: 648mm (25.5")
Fingerboard radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining fret depth, or string height are taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates are not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
It features the so-called G-type black and white geometric pattern, Concorde headstock, and full-mode sustainer, specifications that are essential to the Hotei sound.
With a sustainer unit in the front and a humbucker in the rear, it achieves unique expressions such as infinitely long sustain and harmonic effects. It also allows for synth-like sound creation that cannot be achieved with a normal guitar. Controls include master volume, sustainer volume, 3-position sustainer mode switch, and sustainer ON/OFF switch.
The roller nut and tremolo unit ensure tuning stability during arm-based effects.
Its lightweight, easy-to-handle body balance and high playability are also appealing. This model makes a statement not only for live use but also as a collector's piece.
There was a crack on the 6th string side of the neck joint, which has been reinforced with adhesive.
The bridge stud anchor and body were loose and lifting, so reinforcement was applied via adhesive bonding.
The hole for the bridge saddle height adjustment set screw appears to have enlarged due to deterioration. It is currently set to the standard value.
The battery snap has been replaced.
The back panel is missing.
There is an impact mark with paint chipping on the underside of the headstock top, and paint cracking is present at the neck joint.
There are impact marks with paint cracks near the top corner control and other corners.
There are numerous impact marks on the body back corners accompanied by wood cracks, and numerous impact marks on the body sides and overall body back accompanied by paint cracks and chips.
Other minor scratches and dents indicate moderate signs of use.
The neck shows no noticeable abnormalities and is in good playing condition.
Condition Grade: B+: Some scratches present, but no issues for normal use.
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Tremolo arm
Weight: 3.65kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret depth: No issues. Sufficient fret height present
String Height (Low-String Side): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.0mm
Neck Thickness Near 1st Fret: 20.9mm
Neck Thickness Near 12th Fret: 22.0mm
Scale length: 648mm (25.5")
Fingerboard radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining fret depth, or string height are taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates are not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
$5.23
USED FERNANDES / TE-120S HT HOTEI Model Snow White-Black [11]—
$5.23
Description
Fernandes has created a signature model that faithfully reproduces Hotei Tomoyasu's iconic Telecaster.
It features the so-called G-type black and white geometric pattern, Concorde headstock, and full-mode sustainer, specifications that are essential to the Hotei sound.
With a sustainer unit in the front and a humbucker in the rear, it achieves unique expressions such as infinitely long sustain and harmonic effects. It also allows for synth-like sound creation that cannot be achieved with a normal guitar. Controls include master volume, sustainer volume, 3-position sustainer mode switch, and sustainer ON/OFF switch.
The roller nut and tremolo unit ensure tuning stability during arm-based effects.
Its lightweight, easy-to-handle body balance and high playability are also appealing. This model makes a statement not only for live use but also as a collector's piece.
There was a crack on the 6th string side of the neck joint, which has been reinforced with adhesive.
The bridge stud anchor and body were loose and lifting, so reinforcement was applied via adhesive bonding.
The hole for the bridge saddle height adjustment set screw appears to have enlarged due to deterioration. It is currently set to the standard value.
The battery snap has been replaced.
The back panel is missing.
There is an impact mark with paint chipping on the underside of the headstock top, and paint cracking is present at the neck joint.
There are impact marks with paint cracks near the top corner control and other corners.
There are numerous impact marks on the body back corners accompanied by wood cracks, and numerous impact marks on the body sides and overall body back accompanied by paint cracks and chips.
Other minor scratches and dents indicate moderate signs of use.
The neck shows no noticeable abnormalities and is in good playing condition.
Condition Grade: B+: Some scratches present, but no issues for normal use.
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Tremolo arm
Weight: 3.65kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret depth: No issues. Sufficient fret height present
String Height (Low-String Side): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.0mm
Neck Thickness Near 1st Fret: 20.9mm
Neck Thickness Near 12th Fret: 22.0mm
Scale length: 648mm (25.5")
Fingerboard radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining fret depth, or string height are taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates are not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
It features the so-called G-type black and white geometric pattern, Concorde headstock, and full-mode sustainer, specifications that are essential to the Hotei sound.
With a sustainer unit in the front and a humbucker in the rear, it achieves unique expressions such as infinitely long sustain and harmonic effects. It also allows for synth-like sound creation that cannot be achieved with a normal guitar. Controls include master volume, sustainer volume, 3-position sustainer mode switch, and sustainer ON/OFF switch.
The roller nut and tremolo unit ensure tuning stability during arm-based effects.
Its lightweight, easy-to-handle body balance and high playability are also appealing. This model makes a statement not only for live use but also as a collector's piece.
There was a crack on the 6th string side of the neck joint, which has been reinforced with adhesive.
The bridge stud anchor and body were loose and lifting, so reinforcement was applied via adhesive bonding.
The hole for the bridge saddle height adjustment set screw appears to have enlarged due to deterioration. It is currently set to the standard value.
The battery snap has been replaced.
The back panel is missing.
There is an impact mark with paint chipping on the underside of the headstock top, and paint cracking is present at the neck joint.
There are impact marks with paint cracks near the top corner control and other corners.
There are numerous impact marks on the body back corners accompanied by wood cracks, and numerous impact marks on the body sides and overall body back accompanied by paint cracks and chips.
Other minor scratches and dents indicate moderate signs of use.
The neck shows no noticeable abnormalities and is in good playing condition.
Condition Grade: B+: Some scratches present, but no issues for normal use.
Country of Manufacture: Japan
Case: Non-genuine soft case
Accessories: Tremolo arm
Weight: 3.65kg
Truss Rod: No issues. Rod tested to 60 degrees left and right with no problems.
Fret depth: No issues. Sufficient fret height present
String Height (Low-String Side): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.0mm
Neck Thickness Near 1st Fret: 20.9mm
Neck Thickness Near 12th Fret: 22.0mm
Scale length: 648mm (25.5")
Fingerboard radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance Areas: Cleaning, String Replacement, Truss Rod Adjustment, Octave Adjustment, String Height Adjustment
* As this is a used item, there may be scratches, dents, or other imperfections not easily visible in photos or listed above. Please understand this beforehand.
* Any measurements listed for the truss rod, remaining fret depth, or string height are taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.
* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates are not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
