🎉 Up to 70% Off Selected ItemsShop Sale
USED Gaban / FLG-600 Sunburst [11]
The Gaban Les Paul Custom-style "FLG-600" is now in stock!
The "Gaban" brand, which was produced for a short time in the 1970s
In addition to the binding applied from the body to the neck and headstock, the fingerboard features block inlays and the headstock features diamond inlays. Combined with the set-neck construction, this results in a luxurious look reminiscent of a Les Paul Custom.
The front pickup is a covered humbucker (model unknown), while the rear pickup is the "MMK45" model originally used on Matsumoku guitars at the time.
Since the pickup cavity has been partially expanded and additional screw holes have been added to the rear escutcheon, the pickups may have been replaced.
This is a rare instrument with limited availability on the market.
Overall, it shows signs of wear appropriate for its age, including scratches, dents, fading, and discoloration.
There are numerous cracks in the binding and extensive fading/discoloration throughout.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
There are dents on the fingerboard at the 3rd and 4th frets, and a dent on the side of the fingerboard at the 6th fret.
There are dents and paint cracks on the back of the neck, as well as paint cracks on the body side.
The headstock has scratches, dents, cracked inlays, and paint peeling at the tip where the wood is visible.
There is some warping on the 6th string side of the neck, but it does not affect playability.
Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use
Case: Non-original soft case
Weight: 4.26 kg
Truss Rod: Note: Tested up to 60 degrees in both directions with no issues (limited adjustment remaining)
Fret Wear: Some defects present; replacement should be considered during the next repair
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 18.7 mm
Neck thickness near the 12th fret: 26.0 mm
Scale length: 628mm (24.75")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Rear volume pot replaced
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The "Gaban" brand, which was produced for a short time in the 1970s
In addition to the binding applied from the body to the neck and headstock, the fingerboard features block inlays and the headstock features diamond inlays. Combined with the set-neck construction, this results in a luxurious look reminiscent of a Les Paul Custom.
The front pickup is a covered humbucker (model unknown), while the rear pickup is the "MMK45" model originally used on Matsumoku guitars at the time.
Since the pickup cavity has been partially expanded and additional screw holes have been added to the rear escutcheon, the pickups may have been replaced.
This is a rare instrument with limited availability on the market.
Overall, it shows signs of wear appropriate for its age, including scratches, dents, fading, and discoloration.
There are numerous cracks in the binding and extensive fading/discoloration throughout.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
There are dents on the fingerboard at the 3rd and 4th frets, and a dent on the side of the fingerboard at the 6th fret.
There are dents and paint cracks on the back of the neck, as well as paint cracks on the body side.
The headstock has scratches, dents, cracked inlays, and paint peeling at the tip where the wood is visible.
There is some warping on the 6th string side of the neck, but it does not affect playability.
Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use
Case: Non-original soft case
Weight: 4.26 kg
Truss Rod: Note: Tested up to 60 degrees in both directions with no issues (limited adjustment remaining)
Fret Wear: Some defects present; replacement should be considered during the next repair
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 18.7 mm
Neck thickness near the 12th fret: 26.0 mm
Scale length: 628mm (24.75")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Rear volume pot replaced
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$2.81
USED Gaban / FLG-600 Sunburst [11]—
$2.81
Description
The Gaban Les Paul Custom-style "FLG-600" is now in stock!
The "Gaban" brand, which was produced for a short time in the 1970s
In addition to the binding applied from the body to the neck and headstock, the fingerboard features block inlays and the headstock features diamond inlays. Combined with the set-neck construction, this results in a luxurious look reminiscent of a Les Paul Custom.
The front pickup is a covered humbucker (model unknown), while the rear pickup is the "MMK45" model originally used on Matsumoku guitars at the time.
Since the pickup cavity has been partially expanded and additional screw holes have been added to the rear escutcheon, the pickups may have been replaced.
This is a rare instrument with limited availability on the market.
Overall, it shows signs of wear appropriate for its age, including scratches, dents, fading, and discoloration.
There are numerous cracks in the binding and extensive fading/discoloration throughout.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
There are dents on the fingerboard at the 3rd and 4th frets, and a dent on the side of the fingerboard at the 6th fret.
There are dents and paint cracks on the back of the neck, as well as paint cracks on the body side.
The headstock has scratches, dents, cracked inlays, and paint peeling at the tip where the wood is visible.
There is some warping on the 6th string side of the neck, but it does not affect playability.
Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use
Case: Non-original soft case
Weight: 4.26 kg
Truss Rod: Note: Tested up to 60 degrees in both directions with no issues (limited adjustment remaining)
Fret Wear: Some defects present; replacement should be considered during the next repair
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 18.7 mm
Neck thickness near the 12th fret: 26.0 mm
Scale length: 628mm (24.75")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Rear volume pot replaced
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The "Gaban" brand, which was produced for a short time in the 1970s
In addition to the binding applied from the body to the neck and headstock, the fingerboard features block inlays and the headstock features diamond inlays. Combined with the set-neck construction, this results in a luxurious look reminiscent of a Les Paul Custom.
The front pickup is a covered humbucker (model unknown), while the rear pickup is the "MMK45" model originally used on Matsumoku guitars at the time.
Since the pickup cavity has been partially expanded and additional screw holes have been added to the rear escutcheon, the pickups may have been replaced.
This is a rare instrument with limited availability on the market.
Overall, it shows signs of wear appropriate for its age, including scratches, dents, fading, and discoloration.
There are numerous cracks in the binding and extensive fading/discoloration throughout.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
There are dents on the fingerboard at the 3rd and 4th frets, and a dent on the side of the fingerboard at the 6th fret.
There are dents and paint cracks on the back of the neck, as well as paint cracks on the body side.
The headstock has scratches, dents, cracked inlays, and paint peeling at the tip where the wood is visible.
There is some warping on the 6th string side of the neck, but it does not affect playability.
Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use
Case: Non-original soft case
Weight: 4.26 kg
Truss Rod: Note: Tested up to 60 degrees in both directions with no issues (limited adjustment remaining)
Fret Wear: Some defects present; replacement should be considered during the next repair
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 18.7 mm
Neck thickness near the 12th fret: 26.0 mm
Scale length: 628mm (24.75")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Rear volume pot replaced
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
